ASP Flying Model Rocket Kit That Tube Rocket ASP KTTR-18

ASP Flying Model Rocket Kit That Tube Rocket ASP KTTR-18

Flies without the use of fins! Very easy to build, and quick-change engine hook makes it easy to fly over and over! Features our usual top-quality components, outstanding instructions, and balsa wood nose cone. Tube \"fins\" and payload section come pre-colored red (or change the color if you want!). Large payload section makes running simple experiments a breeze.Great for schools, scout groups, club building sessions

Length: 18.75\"(47.6mm)
Diameter: 0.976\"(24.8mm)
Weight: 1.5oz(44g)
Streamer Recovery
Skill Level: Beginner
Recommended Engines:A8-3; B4-4 (Quest Q-Jet); B6-4; C6-5, C6-7; C12-6 (Quest Q-Jet); D16-6 (Quest Q-Jet)

You can see the instruction sheets by clickinghere.What you\'ll need to build this model:
Required: Adhesive (A wood glue, such as Elmer\'s Carpenters Glue, eBond or Titebond can be used for all steps and is recommended); sandpaper (medium - 220 or 280 grit); pencil or ball point pen; scissors; cotton swab (Q-Tip, or piece of scrap balsa wood); hobby knife; tape (cellophane or masking).
Optional: sandpaper (fine - 320 or 400 grit, extra fine - 500 or 600 grit); filler material (such as Elmer\'s Fill & Finish, Elmer\'s Professional Carpenter\'s Wood Filler or interior spackling paste); sanding sealer (or balsa filler coat); thinner (appropriate type for the sanding sealer); small paint brush; paint (Spray paint, such as Krylon, or Tamiya is recommended. Be sure not to mix different types or brands of paint without testing.) - primer; colors as desired & clear; sanding block; tack cloth.What you\'ll need to fly this model:
Electronic launch system; launch pad with 1/8\" launch rod; recovery wadding; engines (see list of recommended engines above).

Made in the USA