ASP Flying Model Rocket Kit Neo Standard ASP EKNST-18

ASP Flying Model Rocket Kit Neo Standard ASP EKNST-18

A great beginner\'s kit! Easy to build & fly. The fin design makes attachment and alignment extra-easy! Designed with the beginner in mind, but it\'s also a fun sport flier for modelers of any experience level.
Features laser-cut balsa fins, plastic nose cone, quick-change engine hook & parachute recovery. Designed to fly on easy to find 18mm standard engines.Good model to use to learn basic rocketry techniques - we think the \"Neo\" series of kits are perhaps our best all-around kits for the novice.Specifications:
Length: 16.5\"/41.9 cm
Diameter: 0.98\"/24.9 mm
Weight: 1 oz/28 gm
12\" Parachute Recovery
Recommended Engines: 1/2A6-2; A3-4; A8-3; B4-4; B6-4; C6-7; C12-6; D16-8
Skill Level: Beginner
Center of Pressure: 14\" from tip of noseEstimated (calculated) altitudes:with 1/2A6-2: 115 feet/35 meters
with A3-4: 320 feet/97.5 meters
with A8-3: 330 feet/100.5 meters
with B4-4 (Estes): 695 feet/212 meters
with B4-4 (Quest Q-Jet): 720 feet/219.5 meters
with B6-4: 730 feet/222.5 meters
with C6-7: 1350 feet/411.5 meters
with C12-6: 1265 feet/385.5 meters
with D16-8: 1455 feet/443.5 metersWhat you\'ll need to build this model:Required: Adhesive (A wood glue, such as Elmer\'s Carpenters Glue or Titebond can be used for all steps and is recommended); sandpaper (medium - 220 or 280 grit); pencil or ball point pen; scissors; hobby knife; tape (cellophane, aka Scotch Tape, and/or masking).
Optional: sandpaper (fine - 320 or 400 grit, extra fine - 500 or 600 grit); sanding sealer (or balsa fillercoat); thinner (appropriate type for the sanding sealer); small paint brush; paint (Spray paint, such as Tamiya is recommended. Be sure not to mix different types or brands of paint without testing.) - primer; colors as desired & clear; sanding block; tack cloth.What you\'ll need to fly this model:
Electronic launch system; launch pad with 1/8\" launch rod; recovery wadding; engines (see list of recommended engines above).