New fabricated steel center section, New 3\" O.D. axle tubes w/ 3/16\" wall thickness, Axle tubes are internally reinforced for additional strength, Performance 31-spline axle shafts, New Big Ford Toriono-style bearings, seals and HD retainers Speedway Fabricated Ford 9 Inch Rearend Axle Housing Kit, 58 In. Width Sku # 91046058 Mfr. Part # 91046058 Condition New Brand Speedway Motors Sold Kit Details
Looking for a budget-friendly, rock-solid foundation for your custom rear suspension? Look no further. Our fabricated steel Ford 9 inch axle housings feature all-new components for maximum durability. It’s an evolution of the rugged and reliable 9 inch Ford platform.
Designed with the Builder in Mind
This housing is pumpkin-centered with uniform-length axle tubes, side-to-side. So mounting suspension brackets, especially on triangulated 3-link and 4-link systems, is much easier. Unlike factory stamped housings, these fabricated plate-steel center sections provide a wide, flat surface for easy bracket attachment. Note that the pumpkin-centered design will offset the pinion yoke about 1\" to the passenger side.
Axle tubes are 3” O.D. with a 3/16” wall thickness. Heavy-wall tubes, along with a larger center section, significantly reduce distortion during welding of rear-link brackets or spring pads. Billet steel “New Big Ford” (Torino) style bearing ends are fixture-welded (3.150” O.D. bearing, with 2.50” axle flange offset).
Improved Design for Greater Durability
In addition to the heavy-duty bearing ends, the axle tubes are supported with bracing inside the large center housing. This reduces flex in the rear end housing, which is something you won’t find on stamped factory 9 inch housings. Plus, gears stay well-lubed and run cooler thanks to a large-capacity fabricated center (holds more gear oil than stamped housings). Axle is vented on the driver’s side.
Yet, with improved durability, our fabricated axle housing is on average 2 pounds lighter than stock style housings of the same size! Add your choice of axle shafts and third member (sold separately), and you are ready to roll. Equip your race car, hot rod or 4X4 with Ford 9 inch parts from Speedway Motors to ensure there are no weak links in your driveline combination.
Total wheel-to-wheel mounting surface width is 58\" (from hub-to-hub). The pumpkin is centered in the housing, which puts the pinion 1\" offset from center, requiring different length axle shafts. This 58\" housing includes one 29-5/8\" long axle and one 27-1/4\" long axle. This housing includes (8) T-bolts for the axle bearing retainer plates and (10) studs for the third member.
Forged Steel Axles
Our improved axle housings deserve equally strong axles to drive your street machine. Two custom cut Currie axles made of heat-treated 1541 forged alloy steel have the strength to handle the horsepower. Axles are 31-spline, axle bearings, axle seals, and bearing retainers. Flanges are dual-drilled for both 5 on 4-1/2\" Ford/Mopar and 5 on 4-3/4\" GM wheel bolt patterns, and include two sizes of wheel studs (1/2\"-20 Ford/Mopar and 7/16\"-20 GM).
- Fabricated steel center section
- 3\" O.D. axle tubes with 3/16\" wall thickness
- Axle tubes are internally reinforced for additional strength, less flex
- Billet steel \"New Big Ford\" (Torino) style bearing ends
- Forged 1541 Steel axle, dual drilled for both 5 on 4-1/2\" Ford/Mopar and 5 on 4-3/4\" GM wheel bolt patterns.
- Accepts brake kits for 2.50\" axle shaft flange offset (from housing flange)
- Housing measures 53\" from flange-to-flange
- Assembled rearend measures 58\" from hub-to-hub (axle flange face-to-face)
- Includes one 29-5/8\" long axle and one 27-1/4\" long axle
- Improved housing design weighs approximately 2 lbs less than stock-style fabricated housings
- Centered pumpkin w/ 1\" offset pinion yoke for easy suspension mock-up
- Greater-than-stock capacity center section holds more gear oil and runs cooler
- Requires different length axle shafts, left/right
- Includes vent on driver side axle tube
- Includes studs for 3rd member and 3/8” T-bolts for bearing retainer plates
- 3rd member sold separately
Specs Sold in Quantity Kit MFG. Part # 91046058 Position Rear Overall Width 58" Axle Shafts Included Yes Axle Splines 31 Axle Type Semi-Floating Brakes Included No Third Member Included No Ring and Pinion Included Yes Wheel Studs Included Yes Wheel Stud Thread Size 1/2"-20 Wheel Bolt Pattern (in.) 5x4.5 in. | 5x4.75 in. Bearings Included Yes Seals Included Yes Differential Included No Material Type Steel Finish Natural Ring Gear Size 9 Inch Differential Type Limited Slip Tube O.D. 3" Housing Material Steel Hardware Included Yes Rotors Included No Rotor Diameter Not Included Housing Color Gray Cut to Fit No Standard Pinion Location Offset Pinion / Centered 3rd Member Bolt Pattern 5 on 4.5" | 4.75" Reviews I would buy another one for the price that it is Rated by W&N performance on March 11, 2024
Summary: I plan on using it in my daily driver and keep buying parts maybe one day I can get sponsors to do no prep drag racing and be able to build my wife's 67 GTO tube chassis car
Yes, I recommend this product.
Best deal out there! Rated by AJ on November 21, 2022
Summary: I added mini tubs & rear spring mods to my 67 Mustang, so this new custom width 9" housing w/31 spl axles was a great upgrade. Only reason 4 stars is due to some mods (elongating holes) I had to make to my OEM centersection because a few of the studs didn't line up.
Yes, I recommend this product.
Yes I would buy this product again Rated by wesblake on November 11, 2022
Summary: Overall a great product. The welds and most measurements are perfect. The only complaint I would have is that the stud locations were not perfect. I had to really fight to get the 3rd member to go on and I know it wasn't the 3rd member, so the drilled stud holes could be more accurate, but it did work in the end. Also just a note on the Curry axle package I got, the overall description of the package makes it sound like the axles are pre-cut. They are, but one is not cut correct for the housing! I found out the long way, the shorter axle if you look close at the description should be 27 1/4 long but if you look at the kit contents you get an axle 27 3/8 long. It will not go in like that as it hits the cross pin in the 3rd member. I had to cut 1/8 off the end of that axle and that should be noted in the shop page.
Yes, I recommend this product.
Great look Rated by JB on January 08, 2021
Summary: Used on 55' bel air, worked awesome for installing 4link
No brainer Rated by MW on October 14, 2020
Summary: This thing is very well built and so much cleaner than a junk yard swap. The cost of this kit is a no brainer for any build you might be considering. ZERO Cons! Cant say enough about Speedway. They are responsive, tons of updates available via text and e-mail and you can tell they place customer service as a high priority. Thank you!
Yes, I recommend this product.
Related Items / Suggested Parts Ford 9 Inch Posi Differential 3rd Member, 31 Spl, 3.50 Gear Ratio Speedway Ford 9 Inch Posi Traction 3rd Member Assembly, 31 Spl, 3.50 Speedway Ford 9 Inch Posi Traction 3rd Member Assembly, 31 Spl, 3.89 Tanks REFD Rear End Filler and Drain Kit Third Member Mounting Hardware, Ford 8 In/ 9 In Rear End Ford 9 Inch Limited Slip Posi Differential Third Members, Clutch Ford 9 Inch Bolt-On Rear Disc Brake Kit w/ E-Brake Caliper Budget Ford 9 Inch Rear End Disc Brake Conversion Kit Weld On Leaf Spring Pad, Perch, 3 Inch Axle Tube, Pair Speedway 8 & 9 Inch Ford Disc Brake Conversion Kit w/ E-Brake Wilwood 140-7140 Rear Disc Brake Kit, Big Ford 9 Inch New 2-1/2 Offset Ford 9 Inch Helical Posi Limited Slip Third Members | 28/31 Spline Tech Support We\'re here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 74 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.