Heavy-Duty Construction: Fabricated steel center section with 3″ OD axle tubes and 3/16″ wall thickness for increased rigidity and strength over stamped housings., Performance Axle Shafts: Includes performance-grade 31-spline forged steel axle shafts with bearings, seals and heavy-duty retainers to handle high torque and horsepower., Wide Compatibility: Dual-drilled wheel flanges are compatible with both 5×4-1/2″ Ford/Mopar and 5×4-3/4″ GM bolt patterns, making this housing kit versatile for many builds., Centered Pumpkin Design: Pumpkin-centered housing with internal reinforcement reduces flex and simplifies suspension bracket mounting for custom chassis or 4-link setups., Complete Kit Hardware: Comes with axle shafts, retainer bolts and studs for the third member (third member sold separ Speedway Fabricated Ford 9 Inch Rearend Axle Housing Kit, 58 Inch Sku # 91046358 Mfr. Part # 91046358 Condition New Brand Speedway Motors Sold Kit Details
Looking for a budget-friendly and rock-solid foundation for your custom rear suspension? Look no further. These fabricated steel Ford 9\" rearend housings feature all-new components for maximum durability. This housing is pumpkin-centered, which will offset the pinion yoke about 1\". This is done to make fabricating a triangulated 4-link system much easier. Simply weld on your preferred brackets slip in the included 31 spline axles, and add the 3rd member of your choice (sold separately), and you have yourself a rolling chassis!
Total wheel-to-wheel mounting surface width is 58\" (from hub-to-hub). The pumpkin is centered in the housing, which puts the pinion 1\" offset from center, requiring different length axle shafts. This 58\" housing kit includes one 29-5/8\" long axle and one 27-3/8\" long axle. These custom cut and splined axle shafts are manufactured from an induction heat treated 1541 forged alloy. These axles are specific to the aftermarket brake configuration standard in that they have a 2.5\" brake space offset, 2.8\" register hub, and include late model large bearings (Torino bearings). Flanges are dual-drilled for both 5 on 4-1/2\" Ford/Mopar and 5 on 4-3/4\" GM wheel bolt patterns.
Kit includes the fabricated housing, a pair of axle shafts with bearings and seals, two sizes of wheel studs (1/2\"-20 Ford/Mopar and 7/16\"-20 GM), and a reusable 3rd member gasket. Also included are (8) T-bolts for the axle bearing retainer plates and (10) studs for the third member.
- 100% new, fabricated steel center section
- New 3\" O.D. axle tubes w/ 3/16\" wall thickness
- New billet steel \"New Big Ford\" style bearing ends (a.k.a. bearings w/ 2.50\" axle shaft flange offset from housing flange)
- Performance 31-spline axle shafts
- Housing measures 53\" from flange-to-flange
- Assembled rearend measures 58\" from hub-to-hub (a.k.a. axle flange centered pumpkin w/ 1\" offset pinion yoke
- Includes wheel studs, 3rd member studs and T-bolts for bearing retainer plates
- 3rd member stud nuts/washers no included - available as
Specs Sold in Quantity Kit MFG. Part # 91046358 Position Rear Overall Width 58" Axle Shafts Included Yes Axle Splines 31 Axle Type Semi-Floating Brakes Included No Third Member Included No Ring and Pinion Included Yes Wheel Studs Included Yes Wheel Stud Thread Size 1/2"-20 Wheel Bolt Pattern (in.) 5x4.5 in. | 5x4.75 in. Bearings Included Yes Seals Included Yes Differential Included No Material Type Steel Finish Natural Ring Gear Size 9 Inch Differential Type Limited Slip Tube O.D. 3" Housing Material Steel Hardware Included Yes Rotors Included No Rotor Diameter Not Included Housing Color Gray Cut to Fit No Standard Pinion Location Offset Pinion / Centered 3rd Member Bolt Pattern 5 on 4.5" | 4.75" Reviews This product works for me and love . I cant wait till my Rated by Pops on June 25, 2022
Summary: Stronger than stock for my Chev s new ls swap.
Yes, I recommend this product.
Ford 9 inch axle Rated by POPS on June 16, 2022
Summary: cant wait to finish much up and drive...
just what I ordered. very happy Rated by Jim on February 03, 2021
Summary: I am building a T-bucket car
Yes, I recommend this product.
Related Items / Suggested Parts Ford 9 Inch Posi Differential 3rd Member, 31 Spl, 3.50 Gear Ratio Tanks REFD Rear End Filler and Drain Kit Third Member Mounting Hardware, Ford 8 In/ 9 In Rear End T-Bolt Kit w/ Nuts for Ford 9 Inch Rear End Housings Speedway Fabricated Ford 9 Inch Rearend Axle Housing Kit, 58 In. Width Ford 9 Inch Limited Slip Posi Differential Third Members, Clutch Budget Ford 9 Inch Rear End Disc Brake Conversion Kit Ford 9 Inch Limited Slip Posi Differential Third Members, Helical Speedway Ford 9 Inch Rearend Axle Housing Kit, 58 In. Early Ford Tech Support We\'re here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 74 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.