Small Pneumatic Stainless Steel Semi-Automatic Cable Bending Machine Wire Harnes

Small Pneumatic Stainless Steel Semi-automatic Cable Bending Machine Small Pneumatic Stainless Steel
Semi-automatic Cable Bending Machine

Precise Bending & Shaping for Wire and Cable Harnesses

Product Overview

The small pneumatic stainless steel semi-automatic bending machine is mainly designed for wire harness processing and is specially used for the precise bending and shaping of wires and cables. Replacing manual bending, it greatly improves the processing efficiency and the bending consistency of wire harnesses. It is suitable for the small-to-medium-batch production requirements of electronics manufacturing and small-scale wire harness processing factories.

Product Parameters Bending Angle 45° – 120° Max. Bending Capacity 25 mm² for BV solid wire; 70 mm² for BVR flexible wire Required Air Pressure 0.5–0.8 MPa (please use clean and dry compressed air) Material Stainless steel Application Bending and forming for wire & cable harnesses

Notes: Customers shall provide the air compressor by themselves.

Precaution

1. Never place your hands between the die blocks to prevent finger crushing injuries. Use the angle iron supplied with the machine to neaten wire harnesses.
2. Do not process wire harnesses exceeding the machine\'s rated capacity, so as to avoid damage to the core structure of the machine body.
3. Always power off the machine and disconnect the air compressor before adjusting the die blocks or cleaning the machine.
4. Frequently wipe off dust and oil stains on the machine surface in daily use to prevent residual impurities from affecting the bending angle accuracy. Confirm that the die blocks fully return to the initial position before each shutdown.

Product Features

1. Compact desktop design. The machine is small in size and is a desktop-type small unit. It occupies little workshop space and is suitable for small workshops and short production lines.
2. Simple, low-threshold operation. The pneumatic driving structure is matched with a foot switch. The simple design and low operation threshold ensure that ordinary operators can master it after short-term training.
3. Stable bending accuracy. Compared with manual bending, it greatly reduces the deviation of the wire harness bending angle and improves the product yield.
4. Durable stainless steel worktable. The worktable features good wear resistance and corrosion resistance. The thickened support columns and round support feet are designed for stable operation.

Precision Bending Die The precision bending die features a smooth surface and rigid material. It will not damage the cable insulation, and it is durable and wear-resistant. Pneumatic Foot Pedal Switch The pneumatic foot pedal switch enables free control over bending. Simply step on and release it for convenient bending operations. Operation Method

1. Startup Preparation: Install the bracket and adjust the height of the support columns. Connect the machine to the air compressor. After starting, test that the foot switch controls operation properly. Confirm the machine runs without jamming, and verify that the upper and lower dies are securely mounted without looseness.
2. Stroke Adjustment: Power off the machine, loosen the screws for fixing the die blocks, and adjust the die blocks to the required angle and width.
3. Wire Placement: Multiple small-diameter wire harnesses can be placed side by side. Align the wire harnesses neatly with the angle iron supplied with the machine. Warning: Do not place hands between the die blocks.
4. Shutdown and Completion: Turn off the machine and clean away waste materials on the worktable.

Product Display Item Included (020388) 1 × Small Pneumatic Semi-automatic Cable Bending Machine Shipping & Handling Details Default Shipping Cost or Free Shipping Information

Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or other shipping methods: please contact us.

Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas there will be extra shipping costs. Please contact us for more detailed information.

Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of an incorrect or undeliverable address should be undertaken by the buyer.

Handling Time

Shipping is usually made in 1–3 business days after payment clears. Orders are processed Monday–Friday; not on weekends & public holidays.

Sales Tax / Customs Duties

Any sales taxes or customs duties are not included. If they apply, they must be undertaken by the buyer. Sales tax of 8% will be applied for orders shipped within the state of California.

Damage in Shipping

Email or call us first! We will work with you to get the case resolved in the fastest manner.

Return / Refund

If you are not 100% happy with your purchase, please contact us. Please do not open a request or case directly without informing us; otherwise, we will have to reduce discounts on the warranty and other sales services later on. Thank you for your understanding.

Returns & Exchanges

• All returns must be made within 14 days of the delivery date. Items must be in new, unused condition, with all original materials included with the shipment.
• A partial refund may be applied for opened or damaged items, depending on the condition.
• Items returned due to buyer\'s remorse: the return shipping fee must be covered by the buyer; the original shipping cost will also be deducted from the refund; a 15% restocking fee of the item purchase price will be charged.
• Returns that are the result of the seller\'s error: the buyer will receive a full refund of the item as well as the shipping charges.
• All returns require an RA (Return Authorization) number that will be given by our seller. Please contact us first for more details.

Defective & Damaged Products

If a product was received damaged or not as described, please send us some pictures or videos so we can fully understand your problem and solve it for you as soon as possible. This is also very helpful for us when claiming with UPS and when reminding our related department to pay much more attention to packaging in the future. Thank you for your understanding.

Replacement or refund of defective or damaged products can only be given in exchange for the exact same product; otherwise, the purchase price will be refunded back to your original payment method.

If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require an RA (Return Authorization) number as described above.

Payment eCheck Issues

Payments via eCheck do not clear immediately. Usually you will wait 5–7 days after checkout for the payment to clear. Then we will arrange shipments for you.

Warranty & response

• 6 months\' warranty for the machines, not for consumables. We stand behind our products, so even if your warranty period has expired, you can still seek service or technical support from us at low cost.
• Any warranty shipping cost to us is the responsibility of the buyer.
• Any shipping cost to the buyer is the responsibility of the seller.

We are committed to customer satisfaction and want to bring you the best purchase experience. If there are any problems, please contact us as soon as possible. If not, please leave us positive response, as it is very important to us. Thank you very much.

Small Pneumatic Stainless Steel Semi-automatic Cable Bending Machine — Item No. 020388

On Nov 1, 2026 at 19:14:10 PST, seller added the following information: