Small Pneumatic Cable Bending Machine Semi-automatic Wire Bender Stainless steel

Small Pneumatic Stainless Steel Semi-automatic Cable Bending Machine Small Pneumatic Stainless Steel Semi-automatic Cable Bending Machine Product Overview

The small pneumatic stainless steel semi-automatic bending machine is mainly designed for wire harness processing and specially used for precise bending and shaping of wires and cables. Replacing manual bending, it greatly improves the processing efficiency and bending consistency of wire harnesses. It is suitable for small-to-medium-batch production requirements of electronics manufacturing and small-scale wire harness processing factories.

Product Parameters Bending Angle45°-120° Max. Bending Capacity25mm² for BV solid wire; 70mm² for BVR flexible wire Required Air Pressure0.5-0.8MPa (Please use clean and dry compressed air.) MaterialStainless steel ApplicationBending and forming for wire & cable harnesses Notes: Customers shall provide the air compressor by themselves. Precaution

1. Never place your hands between the die blocks to prevent fingers from crushing injuries. Use the angle iron supplied with the machine to neaten wire harnesses.
2. Do not process wire harnesses exceeding the machine\'s rated processing capacity, so as to avoid damage to the core structure of the machine body.
3. Always power off the machine and disconnect the air compressor before adjusting the die blocks or cleaning the machine.
4. Frequently wipe off dust and oil stains on the machine surface in daily use to prevent residual impurities from affecting the bending angle accuracy. Confirm that the die blocks fully return to the initial position before each shutdown.

Product Features

1. The machine is compact in size and is a desktop type small unit. It occupies a small workshop space and is suitable for small workshops and small production lines.
2. The pneumatic driving structure is matched with a foot switch. The simple design and low operation threshold ensure ordinary operators can master it after short‑term training.
3. The bending accuracy is stable. Compared with manual bending, it can greatly reduce the deviation of wire harness bending angle and improve the product yield.
4. The stainless steel worktable features good wear resistance and corrosion resistance. The thickened support columns and round support feet are designed for stable operation.

Precision Bending Die

The precision bending die features smooth surface and rigid material. It will not damage the cable insulation, and is durable and wear-resistant.

Pneumatic Foot Pedal Switch

The pneumatic foot pedal switch enables free control over bending. Simply step on and release it for convenient bending operations.

Operation Method

1. Startup Preparation: Install the bracket and adjust the height of support columns. Connect the machine to the air compressor. After starting, test that the foot switch controls operation properly. Confirm the machine runs without jamming, and verify that the upper and lower dies are securely mounted without looseness.
2. Stroke Adjustment: Power off the machine, loosen the screws for fixing die blocks, and adjust the die blocks to the required angle and width.
3. Wire Placement: Multiple small‑diameter wire harnesses can be placed side by side. Align the wire harnesses neatly with the angle iron supplied with the machine.
   Warning: Do not place hands between the die blocks.
4. Shutdown and Completion: Turn off the machine and clean away waste materials on the worktable.

Product Display Item Included (020388): 1 x Small Pneumatic Semi-automatic Cable Bending Machine Shipping & Handling

Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us.

6 months\' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.

Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.

Sales tax / Customs duties: Collected by .

Return / Refund

Returns & Exchanges
All returns should be made within 30 days of delivery date. Items must be in unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.

Items returned under the buyers remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15-30% restocking fee of the items purchase price will be charged.

Defective & Damaged Products
If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it\'s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.

On Nov 4, 2026 at 20:57:06 PST, seller added the following information: