Stainless Steel Pneumatic Small Semi-automatic Cable Bending Machine

　 Small Pneumatic Stainless Steel Semi-automatic Cable Bending Machine Product Overview The small pneumatic stainless steel semi-automatic bending machine is mainly designed for wire harness processing and specially used for precise bending and shaping of wires and cables. Replacing manual bending, it greatly improves the processing efficiency and bending consistency of wire harnesses. It is suitable for small-to-medium-batch production requirements of electronics manufacturing and small-scale wire harness processing factories. Product Parameters Bending Angle 45˚-120˚ Max. Bending Capacity 25mm² for BV solid wire; 70mm² for BVR flexible wire Required Air Pressure 0.5-0.8MPa (Please use clean and dry compressed air.) Material Stainless steel Application Bending and forming for wire & cable harnesses Notes: Customers shall provide the air compressor by themselves.

Precaution 1. Never place your hands between the die blocks to prevent fingers from crushing injuries. Use the angle iron supplied with the machine to neaten wire harnesses.

2. Do not process wire harnesses exceeding the machine\'s rated processing capacity, so as to avoid damage to the core structure of the machine body.

3. Always power off the machine and disconnect the air compressor before adjusting the die blocks or cleaning the machine.

4. Frequently wipe off dust and oil stains on the machine surface in daily use to prevent residual impurities from affecting the bending angle accuracy. Confirm that the die blocks fully return to the initial position before each shutdown.

Product Features 1. The machine is compact in size and is a desktop type small unit. It occupies a small workshop space and is suitable for small workshops and small production lines.

2. The pneumatic driving structure is matched with a foot switch. The simple design and low operation threshold ensure ordinary operators can master it after short‑term training.

3. The bending accuracy is stable. Compared with manual bending, it can greatly reduce the deviation of wire harness bending angle and improve the product yield.

4. The stainless steel worktable features good wear resistance and corrosion resistance. The thickened support columns and round support feet are designed for stable operation.

　

Precision Bending Die

The precision bending die features smooth surface and rigid material. It will not damage the cable insulation, and is durable and wear-resistant.
　

　

Pneumatic Foot Pedal Switch

The pneumatic foot pedal switch enables free control over bending. Simply step on and release it for convenient bending operations.
　

Operation Method 1. Startup Preparation: Install the bracket and adjust the height of support columns. Connect the machine to the air compressor. After starting, test that the foot switch controls operation properly. Confirm the machine runs without jamming, and verify that the upper and lower dies are securely mounted without looseness.

2. Stroke Adjustment: Power off the machine, loosen the screws for fixing die blocks, and adjust the die blocks to the required angle and width.

3. Wire Placement: Multiple small‑diameter wire harnesses can be placed side by side. Align the wire harnesses neatly with the angle iron supplied with the machine.
Warning: Do not place hands between the die blocks.

4. Shutdown and Completion: Turn off the machine and clean away waste materials on the worktable.

Product Display Item Included (020388): 1 x Small Pneumatic Semi-automatic Cable Bending Machine

You can make order with no worry.
Any concern just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Warranty: 6 months\' warranty for the machines, not for the consumables.
We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.

On Nov 10, 2026 at 23:46:18 PST, seller added the following information: