Driver and passenger footwells Under-dashboard areas Under-seat accent lighting Center console and cupholder areas Rear seat footwells Glove box and door pockets
Select from 20 static colors (red, blue, green, yellow, purple, cyan, white, pink, orange, etc.) Choose dynamic modes: jump, fade, strobe, flash, gradual change Adjust brightness levels (for static colors) Control music sync sensitivity (low/medium/high) Turn lights on/off
Built-in on/off switch for easy control LED power indicator Extra USB port on some models (check specifications)
Calm blue for relaxing drives Energetic red for sport mode Romantic purple for date night Green for a natural feel Party mode with music-synced multi-color effects
Pre-applied3M automotive-grade adhesive backingon each light bar for secure mounting on clean, dry surfaces Flexible silicone strips bend to fit contours of your vehicle\'s interior Included cable clips help route and hide wires neatly Compact control box can be hidden under dash or in glove box Extra-long cables (1.3m + 1.8m) reach all four corners
Sedans: Honda Civic, Toyota Camry, BMW 3 Series, Mercedes C-Class SUVs: Ford Explorer, Honda CR-V, Jeep Wrangler, Toyota RAV4 Trucks: Ford F-150, Ram 1500, Chevrolet Silverado, Toyota Tundra
Parameter Details Brand RSTOB Light Bars 4 pieces (flexible silicone) LED Type 5050 SMD RGB LED Count 12 LEDs per bar (48 LEDs total) Input Voltage DC 12V (cigarette lighter plug) Power Consumption 8-12W Control Method IR Wireless Remote (20+ keys) Special Modes Music sync, jump, fade, strobe, flash, gradual Static Colors 20 colors Sound Sensor Built-in microphone in control box Cable Lengths 1.3m + 1.8m pairs (approx. 4.3ft + 5.9ft) Light Bar Dimensions Approx. 8.7\" x 0.55\" x 0.3\" (22cm x 1.4cm x 0.8cm) Irradiation Angle 180° wide-angle illumination Lifespan 50,000+ hours Material Flexible silicone + ABS control box Waterproof Rating IP65 (weather-resistant for interior use) Installation 3M adhesive backing + cable clips
Mode Description Static Color Choose from 20 fixed colors – press color button for instant selection Jump Mode Colors change rapidly in sequence (adjustable speed) Fade Mode Smooth gradual transition between colors Strobe Mode Rapid flashing effect (adjustable speed) Flash Mode Alternating flash between colors Gradual Change Slow, smooth color cycling Music Sync Mode Lights pulse and change in real-time with sound/music – 3 sensitivity levels
Clean Surface– Wipe mounting areas (footwell plastic, under-dash) with isopropyl alcohol for maximum adhesion. Position Lights– Test placement of each light bar before removing adhesive liner. Peel & Stick– Remove 3M tape backing and press firmly onto clean surface. Hold for 30 seconds. Route Wires– Use included clips to hide cables along trim edges and under carpet. Connect Control Box– Plug light bars into control box (color-coded ports). Power Up– Insert cigarette lighter plug into 12V socket. Use on/off switch for easy control. Test Remote– Remove battery insulator tab, point remote at control box, and enjoy!
For best adhesion on textured surfaces, warm the adhesive with a hair dryer before pressing Mount control box where IR receiver has clear line of sight to driver\'s seat Use included cable ties to bundle excess wire
4 x RSTOB RGB LED Light Bars (with 3M adhesive backing) 1 x Wireless IR Remote Control (CR2025 battery included) 1 x Control Box with built-in sound sensor 1 x Cigarette Lighter Power Cable with on/off switch 1 x Set of Cable Clips and Zip Ties 1 x User Manual (English)
For interior use only– not waterproof for exterior installation IR remote requires line of sight– mount control box in visible location 12V only– not compatible with 24V trucks without converter Check remote battery– CR2025 battery included (may have protective tab)
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.