Parameter Details Brand RSTOB LED Type 5050 SMD RGB LED Density 60 LEDs per meter Input Voltage DC 12V / 24V (auto-detects) Power Consumption Approx. 5-8W per meter Color Range 16 million+ RGB colors Control Method Smartphone App (Bluetooth) Special Modes Flowing/chasing, jump, fade, strobe, music sync, DIY patterns Waterproof Rating IP68 (fully sealed) Strip Thickness Approx. 2-3mm (ultra-thin) Strip Width Approx. 8-10mm Cut Interval Every 3 LEDs (approx. 5cm / 2 inches) Operating Temp -40°C to +85°C Lifespan 50,000+ hours
Exterior Mount Interior Mount (This Product) Exposed to weather, car washes Protected inside housing Visible as \"add-on\" accessory Clean, OEM+ hidden look Adhesive exposed to elements Adhesive protected from weather Can be damaged by rocks/debris Fully protected by headlight lens Requires external wiring Wiring hidden inside housing
Remove Headlight Assembly– Remove headlight housing from vehicle per manufacturer instructions. Open Headlight Housing– Headlight must be opened (typically by heating and prying lens from housing) . This process requires proper tools and experience. Plan Layout– Measure and mark desired mounting location (around projector shroud, along bottom edge, or as angel eye rings). Clean Surface– Thoroughly clean mounting area inside headlight with isopropyl alcohol. Cut to Length– Cut strip at marked solder points to desired length. Seal cut end with silicone glue or heat-shrink tubing to maintain waterproof rating. Peel & Stick– Remove 3M tape backing and press firmly onto clean surface inside housing. Wire Connection (12V/24V DC): Red Wire:Connect to 12V/24V positive (DRL circuit, ACC, or parking light) Black Wire:Connect to ground (chassis negative) Route Wires– Route wires through shroud or bezel to back of headlight, sealing any holes created . Mount Controller– Mount control boxoutsidethe headlight housing (in engine bay) for serviceability, away from engine heat . Test Before Sealing– Verify all functions before resealing headlight. Reseal Headlight– Properly reseal housing with butyl glue or automotive-grade sealant to prevent moisture ingress. Reinstall– Reinstall headlight assembly onto vehicle.
1 x RSTOB Ultra-Thin RGB LED Strip (your selected length) 1 x Bluetooth Smart Controller
Upgrade your headlights with RSTOB – ultra-thin RGB LED strips designed specifically for interior headlight installation, 12V/24V compatible, APP controlled, and IP68 waterproof. Order today!🚗💡✨
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.