Download the free APP (compatible with iOS and Android) via QR code on the control box. Once connected viaBluetooth, you can:
Choose from16 million+ RGB colors
-
Select from29+ dynamic lighting modes(fade, jump, strobe, flash, gradual change, flowing/chasing)
-
Adjust brightness and speed
-
Create and save custom DIY color patterns
-
Set timers for automatic on/off
-
Activate music sync mode
Built-in high-sensitivity microphone detects music, voice, and ambient sound, causing the lights toflash, pulse, and change color in real-time with the rhythm. Multiple sensitivity levels let you fine-tune the response. Perfect for creating an immersive audio-visual experience during night drives.
Simply plug into any standardUSB port(5V, 1A-2A) – your car\'s USB outlet, a cigarette lighter USB adapter, a power bank, or even a laptop. No hardwiring, no professional installation, no complicated wiring diagrams. Just plug it in and it\'s ready to go.
With a thickness of just2-3mmand width of approximately 8-10mm, this ultra-slim light strip fits seamlessly into dashboard gaps, center console seams, and under-dash areas without being noticeable when turned off. The flexible PCB bends easily to follow any contour.
Pre-applied1.45M automotive-grade adhesive backingensures secure mounting on clean, dry, smooth surfaces. Simply:
Clean the mounting area with isopropyl alcohol
-
Peel off the protective backing
-
Press firmly onto the desired location
-
Plug into USB power
Express your personality with an endless palette of colors and effects:
Static colors:Red, green, blue, yellow, purple, cyan, white, orange, pink, and everything in between
-
Dynamic modes:Smooth fade, rapid jump, strobe, flashing, gradual change, flowing/chasing, breathing, and more
-
DIY mode:Create and save your own custom color sequences
Works perfectly on all 5V USB-powered vehicles and devices:
Passenger cars (sedans, hatchbacks, coupes)
-
SUVs and crossovers
-
Pickup trucks
-
Vans and minivans
-
RVs and campers
-
Motorcycles (with USB port)
-
Also great for desktop computers, gaming rigs, TVs, bedrooms, and parties
Fully sealed silicone housing is ratedIP67for protection against moisture, dust, and spills. Reliable operation from -20°C to +60°C. Rated for50,000+ hoursof continuous use.
Consumes minimal power (approx. 2-5W depending on length and brightness), generating virtually no heat. Safe for extended use during long drives or while parked.
Parameter Details Brand RSTOB Product Type RGB Car Interior Atmosphere Light Strip LED Type 5050 SMD RGB LED Density 60 LEDs per meter (typical) Input Voltage DC 5V (USB) Current 0.4A-1A (depending on length and mode) Power 2-5W Color Range 16 million+ RGB colors Dynamic Modes 29+ modes (fade, jump, strobe, flash, gradual, flowing, music sync, DIY) Control Method Smartphone APP via Bluetooth (iOS & Android) Music Sync Built-in microphone on control box Waterproof Rating IP67 Strip Thickness Approx. 2-3mm Strip Width Approx. 8-10mm Cut Interval Every 3 LEDs (approx. 5cm / 2 inches) – cuttable on select models Adhesive 1.45M automotive-grade double-sided tape Interface USB connector Lifespan 50,000+ hours Operating Temp -20°C to +60°C Compatibility Universal – all vehicles with USB port
Location Effect Dashboard gap Seamless OEM+ ambient lighting Center console edge Highlight the console contour Under-dash (driver/passenger) Footwell accent lighting Door panel edge Welcome lighting and ambiance Behind steering wheel Steering column accent Cupholder surround Highlight convenience areas
Plan Your Layout– Decide where you want to mount the light strip (dashboard gap, center console, under-dash).
-
Clean Surface– Thoroughly clean the mounting area with isopropyl alcohol or a clean dry cloth. Let it dry completely.
-
Test Before Sticking– Plug the USB into power and test the lights to ensure they work before permanent installation.
-
Peel & Stick– Remove the protective backing from the 3M tape and press the strip firmly onto the clean surface. Hold for 30 seconds for optimal adhesion.
-
Route Cable– Neatly route the USB cable along trim edges to your USB power source. Use included cable clips (if provided) or adhesive wire holders.
-
Download APP– Scan the QR code on the control box to download the APP (iOS/Android).
-
Connect Bluetooth– Open the APP, enable Bluetooth, and the device will connect automatically.
-
Enjoy!– Customize colors, modes, and music sync to create your perfect atmosphere.
For best adhesion, warm the mounting surface and adhesive tape with a hairdryer before pressing
-
Avoid bending the strip sharply at corners – use smooth curves
-
Keep the control box\'s sound sensor exposed to music for optimal music sync performance
Feature Description Color Wheel Choose any color from the full RGB spectrum Brightness Control Adjust brightness from 0-100% Speed Control Adjust animation speed for dynamic modes Mode Selection Browse and select from 29+ preset modes Music Sync Lights react to music via built-in mic DIY Mode Create and save custom color patterns Timer Function Set automatic on/off schedules Scene Presets Save favorite color/mode combinations
✅Smartphone APP control– more intuitive than IR remotes
✅Music sync mode– immersive audio-visual experience
✅16 million colors + 29+ modes– endless customization
✅Ultra-thin flexible design– fits any dashboard gap
✅3M adhesive pre-applied– quick, secure installation
✅IP67 waterproof– durable for interior use
✅Universal fit– works in cars, trucks, SUVs, and even desktops
✅Trusted brand– RSTOB specializes in automotive LED lighting; every unit tested before shipping
A: Yes, it works in any vehicle with a USB port (5V). Most modern cars have USB ports; for older vehicles, use a cigarette lighter USB adapter (not included).
A: No – simply plug into any USB port. No hardwiring, no professional installation required.
A: Download the free APP via QR code on the control box. Control via Bluetooth from your smartphone (iOS or Android).
A: Yes, on most models you can cut the strip at marked points (every 3 LEDs). Seal the cut end with silicone glue or heat-shrink tubing to maintain waterproof rating.
A: The strip is designed for ambient accent lighting – most visible at night or in low-light conditions, with subtle daytime presence.
A: Yes – perfect for desktop computer setups, gaming rigs, TVs, bedroom accent lighting, and parties.
1 x RSTOB RGB LED Light Strip
-
1 x Bluetooth Control Box
USB 5V only– do not connect directly to 12V vehicle power without a USB adapter
-
For interior use only– IP67 rated for moisture resistance, not for exterior mounting exposed to direct rain
-
APP requires Bluetooth– ensure your phone has Bluetooth enabled
-
Android users– may need to enable Location Services for Bluetooth connection
-
Colors may vary slightlydue to monitor display settings
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.