ANCEL JC400 Ultrasonic Fuel Injectors Cleaner Tester GDI Injectors Machine Kit

ANCEL JC400 4Cylinder GDI EFI Fuel Injector Ultrasonic Cleaning Auto Mode Test

ANCEL JC400 Automotive Fuel Injector Cleaner Tester for PFI GDI Piezo Injector 0-20Bar Pressure Injector Nozzle Cleaning Machine

ANCEL JC400 Description

This fuel injector test unit is designed to test various types of modern automotive fuel injectors, including the latest GDI injectors. It stands out from similar products thanks to a series of innovative technological designs.

1.Powerful 6-channel automotive fuel injector cleaning test bench 4
2.Compatible with all specifications of automotive fuel injectors on the market, including low-resistance pre-spray type, standard pre-spray type, GDI map type, and GDI piezo electric type.
3.Peak&Hold GDl map type drive voltage can be adjusted between 60-100V, and current between 3-20A.
4.Piezo GDI piezoelectric drive voltage can be adjusted between 100-170V, with current adjustable between 3-20A.
5.AC 90-240V global wide voltage support.
6.Features a high-definition LCD display with menu-driven function settings for simpler and more intuitive operation.
7.Equipped with a high-precision digital dynamic pressure sensor, intelligent fuel supply, and oil pressure balancing system to ensure stable oil pressure during testing, lower power consumption, and maximum oil pressure supply up to 20 bar.
8.Testing nozzle with a diameter of up to 50mm for more comprehensive observation of the atomization model.
9.Three testing modes: atomization testing/pressure retention leakage testing/variable speed testing.
10.Integrated design of ultrasonic cleaning and testing, achieving smaller size and weight, facilitating cost control for global transportation.

Product Parameters

Voltage:AC 90 - 240V，50/60Hz
Test Fluid Tank:Max 1.5L
Output Signal:Low resistance PFI / High resistance PFI / GDI - Peak & Hold / GDI - Piezo
RPM:120 - 2400 step 120
Pulse Bath:0.8L，Max 60W，Dynamic frequency from 28Khz to 46Khz

Operation Principle

1- Power Socket
The injector test bench is compatible with a wide input range from 90V to 240V AC 50/60Hz.

2- Test Fluid Level Gauge & Drain Hose
The Injector test bench comes with 1.5L fluid tank. Note the fluid level when refilling. Make sure that the fluid level does not exceed the max line. Remove the hose to drain the test fluid, as needed. When unboxing the injector test bench, the rack that fixes the hose may need to be mounted.

3- Ultrasonic Fluid Drain Hose
Remove the hose to drain the test fluid, as necessary. When unboxing the injector test bench, the rack that fixes the hose may need to be mounted.

4- Control Panel
Please refer to the Control Panel section for detailed operating instructions.

5- Signal Output
From left to right, the signal indexes are #1 to #4, on which the signal cords shall be mounted.

6- Cylinder Seal Switch
Lift up the cylinder seal switch to seal the cylinders, and pull it down to release, so that the cylinders can be drained as needed.

7- Locking Nut
For locking the fuel distributor. To remove, move the locking nut 1cm higher so that the fuel distributor can be taken off.

8- Test Fluid Delivery Hose
This hose extends from the piston fuel pump, to supply test fluid to the fuel distributor. This must be mounted before starting to use the test bench. Once mounted, it is not necessary to take it off.

9- Pressure Balancing & Stabilizing Hose
This hose leads to the air-lock pressure balancing & stabilizing assembly. It is designed to push air out of the fuel distributor to ensure no air remains in the distributor.

10 - Fuel Distributor
The fuel distributor has an inbuilt Φ13 fitting. Injectors of this size can be mounted to the distributor directly, while other injectors will need to use adapters. Please refer to the Accessories section for adapter details.

11 - Ultrasonic Bath
The Ultrasonic Bath must not be activated unless there is fluid in the bath, filled to the minimum level. To activate the ultrasonic bath, at least one injector must be connected to the signal cord, or else this may cause an error. Put injectors into the basket, then put the basket into the ultrasonic bath. Otherwise, there is a risk that the shock created by the activated injectors may damage the ultrasonic bath. Drain and clean the Ultrasonic Bath after use.

12 - Fuel Distributor Mounting Ports
There are two sets of mounting ports for the fuel distributor. The set in the middle is for regular injectors, the other set are for injectors where the feed port and nozzle are not vertically centered, e.g. Siemens Piezo.

Smart Control Panel
A. Up button
B. Confirm button
C. Down button
D. Return button
E. Backlight button
F. Pressure button
G. Start/stop button
H. Signal output

Which cleaning solution should I use?

Ultrasonic Bath:
It is recommended to use ready-made bottled ultrasonic fluid or special ultrasonic cleaning powder.
If the above items are not available, a mixture of water and the following items can be used as a substitute:

⭐Degreaser
⭐Kitchen cleaner
⭐Sodium bicarbonate

Injector Test Fluid:
It is recommended to use ready-made bottled test fluid.
If such test fluid is unavailable, the following items may be used as an alternative:

⭐Kerosene / Paraffin
⭐Diesel fuel

⚠️ ‌Never use ethanol or gasoline as test fluid, as they are highly flammable!

Interfaces
When the injector test bench is powered up, the first screen provides for the selection of the injector type. The following chart indicates the software structure.

Product Package

Deployment / Workplace

The injector test bench must be installed on a flat surface, away from open flames and sparks.
If the injector test bench needs to be moved, all remaining test fluid must first be drained from the equipment.

PAYMENTDELIVERY DETAILSTERMS OF SALESABOUT USCONTACT USPAYMENT

• We accept Credit cards、Debit card、Apple Pay、Google Pay etc.payment.
• Please contact us if you need to use another method to pay.
• Payment should be made within 4 days after offerding ends.
• Otherwise an Unpaid Item case will be opened to you.
• We are not responsible for buyers’ local taxes.
• Please include your special requests in note if there is any.
• We reserve the final right of selling

DELIVERY DETAILS

• Order will be shipped within 1 business day after payment confirmed.
• We have warehouse in and China warehouse.
• From our US/UK/RU/DE/AU warehouse via USPS or UPS eCommerce shipping,Delivery time varies from 2 to 6 business days.
• From our China warehouse via DHL or Fedex,Delivery time varies from 5-12 business days.
• We will ship according to your payment address,Please make sure it is correct and include phone number for delivery.
• If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
• Please include your special requests in note if there is any.

TERMS OF SALES

• We can not guarantee that you will be able to access every module or use every piece of cd/dvd software. Compatibility varies due to variations in the cars modlue or availabilty of year it released from original factory.
• We don\'t take charge to complete clearance when parcel arrived at your Customs(Because we sold at a low price,good quality,limited profit only),but we will do all what we can to help you get your package.
• Please do not hesitate to leave us your positive response if you are happy with your shopping. if you are just a little satisfied with your purchase, please do not leave us negative or neutral response before contacting us.
• We are not responsible for Buyer\'s Local Taxs

ABOUT US

• 1.ANCEL specializes in automotive intelligent diagnostics, detection and analysis systems, and automotive-related products for mechanics, repair shops, and DIYers.
• 2.Our independent brand isANCEL(welcome to visit the official website to view）At the same time, we also represent other brands such asFOXWELL, LAUNCH, AUTOPHIX,OBDPROG ect
• All products are 100% genuine, and we provide free return/exchange/refund services as well as technical support. If there are any after-sales or pre-sales messages that can be sent to us, we will promptly handle them and provide satisfactory solutions

CONTACT US

• If you are satisfied with our product or our service, please leave Positive response 5-Stars ★★★★★
• If you have any question,please feel free to contact us first before you leave response , we will try our best to solve the problem
• Business time: GMT8( 9:00 am-6:30 pm) monday to saturday

On Nov 12, 2026 at 03:41:07 PST, seller added the following information: