ANCEL JC400 Ultrasonic Fuel Injector Tester Cleaner Injecting Flow Test Machine

ANCEL JC400 Automotive Fuel Injector Cleaner Tester for PFI GDI Piezo Injector 0-20Bar Pressure Injector Nozzle Cleaning Machine
Product Features
This fuel injector test unit is designed to test various types of modern automotive fuel injectors, including the latest GDI injectors. It stands out from similar products thanks to a series of innovative technological designs.
1.Equipped with an LCD control panel, all operation configurations can be completed in a single display area.
2.Built-in high-precision digital pressure sensor, paired with a closed-loop pressure control circuit.
3.Features unique air lock pressure balancing and stabilization technology.
4.It incorporates an innovative piston fuel pump, enabling the use of a wider range of test fluids.
5.It uses a 50mm diameter corrosion-resistant borosilicate tube, enhancing the observation of injection performance during testing.
6.It supports an adjustable backlight function.
7.It enables zero-pressure connection and disconnection of the injector.
How should I use JC400?
1- Power Socket
The injector test bench is compatible with a wide input range from 90V to 240V AC 50/60Hz.
2- Test Fluid Level Gauge & Drain Hose
The Injector test bench comes with 1.5L fluid tank. Note the fluid level when refilling. Make sure that the fluid level does not exceed the max line. Remove the hose to drain the test fluid, as needed. When unboxing the injector test bench, the rack that fixes the hose may need to be mounted.
3- Ultrasonic Fluid Drain Hose
Remove the hose to drain the test fluid, as necessary. When unboxing the injector test bench, the rack that fixes the hose may need to be mounted.
4- Control Panel
Please refer to the Control Panel section for detailed operating instructions.
5- Signal Output
From left to right, the signal indexes are #1 to #4, on which the signal cords shall be mounted.
6- Cylinder Seal Switch
Lift up the cylinder seal switch to seal the cylinders, and pull it down to release, so that the cylinders can be drained as needed.
7- Locking Nut
For locking the fuel distributor. To remove, move the locking nut 1cm higher so that the fuel distributor can be taken off.
8- Test Fluid Delivery Hose
This hose extends from the piston fuel pump, to supply test fluid to the fuel distributor. This must be mounted before starting to use the test bench. Once mounted, it is not necessary to take it off.
9- Pressure Balancing & Stabilizing Hose
This hose leads to the air-lock pressure balancing & stabilizing assembly. It is designed to push air out of the fuel distributor to ensure no air remains in the distributor.
10 - Fuel Distributor
The fuel distributor has an inbuilt Φ13 fitting. Injectors of this size can be mounted to the distributor directly, while other injectors will need to use adapters. Please refer to the Accessories section for adapter details.
11 - Ultrasonic Bath
The Ultrasonic Bath must not be activated unless there is fluid in the bath, filled to the minimum level. To activate the ultrasonic bath, at least one injector must be connected to the signal cord, or else this may cause an error. Put injectors into the basket, then put the basket into the ultrasonic bath. Otherwise, there is a risk that the shock created by the activated injectors may damage the ultrasonic bath. Drain and clean the Ultrasonic Bath after use.
12 - Fuel Distributor Mounting Ports
There are two sets of mounting ports for the fuel distributor. The set in the middle is for regular injectors, the other set are for injectors where the feed port and nozzle are not vertically centered, e.g. Siemens Piezo.
Deployment / Workplace
The injector test bench must be installed on a flat surface, away from open flames and sparks.
If the injector test bench needs to be moved, all remaining test fluid must first be drained from the equipment.
Which cleaning solution should I use?
Ultrasonic Bath:
It is recommended to use ready-made bottled ultrasonic fluid or special ultrasonic cleaning powder.
If the above items are not available, a mixture of water and the following items can be used as a substitute:
Degreaser
Kitchen cleaner
Sodium bicarbonate
Injector Test Fluid:
It is recommended to use ready-made bottled test fluid.
If such test fluid is unavailable, the following items may be used as an alternative:
Kerosene / Paraffin
Diesel fuel
⚠️ ‌Never use ethanol or gasoline as test fluid, as they are highly flammable!
Parameters:
Dimensions: 27*31*35cm
Power: Max 150W
Voltage: AC 90 - 240V，50/60Hz
Test Fluid Tank: Max 1.5L
Output signal: Low resistance PFI / High resistance PFI / GDI - Peak & Hold / GDI - Piezo
RPM: 120 - 2400 step 120
Pulse Width: 4000~9900μs
Pressure: 0~20Bar
Unit: Bar，Kpa，PSI，Kg/cm²
Ultrasonic Bath: 0.8L，Max 60W，Dynamic frequency from 28Khz to 46Khz
Package:PaymentDelivery detailsTerms of salesAbout usContact usPayment1.We accept all common forms of payment such as Credit cards,Debit card,Google Pay,PayPal ect. payment.
2.Orders will be processed within 1 business day after the payment is cleared.
3.Payment should be made within 3 days after offerding ends, or anunpaid item case will be opened to buyers.
4.Regarding OBD products, please send us the vehicle model or VIN in advance to confirm whether it is supported your car.
5.Warm Tip: Payment before 11:30pm(AEST) will be shipped on the day !Delivery detailsFor Australian/New Zealand buyers, most of our items are shipped from our own Sydney warehouse.
1. Shipping terms:AU Post Parcel or AU Post Express.
2. Shipping address supplied by or Paypal is acceptable.
3. After the payment cleared, your order will be sent out within 1 business days shipping(not including holiday and weekend) .
4. Please make sure it is correct and include phone number,post code for delivery.
5. If your package delayed few days, due to any unexpected factor, please wait patiently. your kind understanding would be highly appreciated!Terms of sales1.We have official authorization for all products,our all items are 100% original and Our devices have warranty.
2.We offer 60-day free return and exchange. If there is any problem with the product you received, please contact us and we will provide a free return label.
3.Unlimited Technical Service is available,Contact us via information.
4. Please do not hesitate to leave us your positive response if you are happy with your shopping. if you are unsatisfied with your purchase, please do not leave us negative or neutral response before contacting us, we will resolve the trouble for you.5.If you are unsure whether the product is supported, please contact us.About us1.We are specialized dealer of On-Board Diagnostic tools and automotive electronics,Possessing multiple excellent brand distribution authorizations.as ect.
2.We are eager to be your professional parner of automobile diagnostic tool.
3.We support remote assistance by teamviewer if you have any difficulty in software installation.
4.We have a team of technicians, engineers and sales staff available Monday-Friday 9am-6pm to help with any questions or problems that you may have.
5.We have been in automotive diagnostic for more than 10 years.Wholesaler, retailer and distributor are welcome.Contact us1.Our customer-oriented service strives for positive responses with all 5 star selling ratings.
2.Please feel free to contact us via message once you have any question before you giving us negative response or open case.
3.We will reply in 24 business hours.
4.Business time: GMT8 (9:00-18:00) from Monday to Friday.
5.Thank you very much for your cooperation. If you have any questions or needs, you can consult us.