ANCEL JC200 JC400 JC600 Fuel Injector Tester Cleaner Ultrasonic Cleaning Machine

Gas Diesel All Type Fuel Injector Cleaner Tester GDI Piezo Ultrasonic CleaningFuel Injector Cleaner Tester Kit

ANCEL JC600 Automotive Injector Cleaning 6-Cylinder Injector Nozzle Cleaning Machine for All PFI GDI Piezo Car Moto Injector

The most powerful fuel injector cleaning machine ever is here! Compatible with all specifications of automotive fuel injectors on the market, including low-resistance pre-spray type, standard pre-spray type, GDI map type, and GDI piezo electric type.

Why is ANCEL JC600 the most powerful fuel injector cleaning machine ever made?

1.Powerful 6-channel automotive fuel injector cleaning test bench 6

2.Compatible with all specifications of automotive fuel injectors on the market, including low-resistance pre-spray type, standard pre-spray type, GDI map type, and GDI piezo electric type.

3.Peak&Hold GDl map type drive voltage can be adjusted between 60-100V, and current between 3-20A.

4.Piezo GDI piezoelectric drive voltage can be adjusted between 100-170V, with current adjustable between 3-20A.

5.AC 90-240V global wide voltage support.

6.Features a high-definition LCD display with menu-driven function settings for simpler and more intuitive operation.

7.Equipped with a high-precision digital dynamic pressure sensor, intelligent fuel supply, and oil pressure balancing system to ensure stable oil pressure during testing, lower power consumption, and maximum oil pressure supply up to 20 bar.

8.Testing nozzle with a diameter of up to 50mm for more comprehensive observation of the atomization model.

9.Three testing modes: atomization testing/pressure retention leakage testing/variable speed testing.

10.Integrated design of ultrasonic cleaning and testing, achieving smaller size and weight, facilitating cost control for global transportation.

Product Features
This fuel injector test unit is designed to test a range of modern automotive fuel injectors, including the
latest model GDl injectors. This unit features a range of innovative technical designs distinguishing itself
from othersimilar units on the market.

●An LCD control panel which enables all operations to be configured in one display area.
●An inbuilt high accuracy digital pressure sensor with closed-loop pressure control circuit.
●Unique Air-Lock pressurebalancing & stabilizing technology.
●An inbuilt Innovative piston fuel pump which enables the use of a wider range of test fluids.
●Dim.50mm toughborosilicate tubes forbetter observation of spray-ability pressure connection and disconnection of the voltage: AC 90-240V 50/60Hz
Power: Maximum 150W
Ambient temperature: -5°C to +50°C
Tank capacity: Maximum 1500 mL
Output signal: Low PFI / High PFI / GDI
Dimensions and weight: 8.00*34.5*45 cm, 11.8 kg
Pulse width: 4000–9900 micro seconds
Ultrasound: Maximum 60 W, frequency 28 kHz–46 kHz
Pressure: 0–20 bar

Power : Max 150W
Test Fluid Tank: Max 1.5L
Output signal: : RPM 120-2400 step 120
Pulse Width : 4000~9900us
Pressure : 0~20Bar
Unit :Bar, Kpa, PSl, Kg/cm2
Ultrasonic Bath accessories

US standard power cord 1.2m * 1
Oil separator connection tube * 2
Funnel * 1
Ultrasonic bracket * 1
Ultrasonic cover * 1
Oil separator * 1
Accessory box * 1
M6*250 screw * 2
Adjustment nut * 2
8mm open-end wrench * 1
2mm hex wrench *1
Manual *1
Signal cable *6
Signal adapter cable *6
Φ10 washer *6
Φ14 washer *6
Plug *5
M12 connector with adapter *6
10.6 connector *6
11.6 connector *6
12.6 connector *6
13.6 connector *6
14.6 connector *6
15.6 connector *6

Which cleaning solution should I use?

●Ultrasonic Bath:
It\'s recommended touse ready-to-use bottled ultrasonic fluid,or specialized ultrasonic cleaning
powder.
Should the above not be available,a mixture of water and the following items could beused as Test Fluid:
Werecommend such fluid not be available,the following items could be used as an JC400 Automotive Fuel Injector Cleaner Tester for PFI GDI Piezo Injector 0-20Bar Pressure Injector Nozzle Cleaning Machine

Universal voltage compatibility worldwide, supports piezoelectric injectors, and covers nearly all injector types.

Functions:
● Digital display screen
● Ultrasonic cleaning
● Injector spray testing
● Seal testing
● Variable speed testing
● Pressure return testing
● Automatic pressure relief

Features
> Wide voltage range 110-240V ;
> Multi-language support (Chinese, English, Spanish, Portuguese, Russian, German);
> Pressure range 1-20 bar, closed-loop electronic control system, units: bar, psi, kPa, kg/cm²;
> Superior drive capability with integrated power limitation mechanism;
> Premium aerospace-grade aluminum alloy components for exceptional overall performance;
> 6-cylinder 38mm;
> Extensive connector options: 10.6/11.6/12.6/13.6/14.6/15.6/M12, compatible with all injector models except TBI;
> Multi-size gaskets for all injector installation requirements;
> Ultrasonic cleaning: 60W, 28-40KHz

Product Features

This fuel injector test unit is designed to test various types of modern automotive fuel injectors, including the latest GDI injectors. It stands out from similar products thanks to a series of innovative technological designs.

1.Equipped with an LCD control panel, all operation configurations can be completed in a single display area.
2.Built-in high-precision digital pressure sensor, paired with a closed-loop pressure control circuit.
3.Features unique air lock pressure balancing and stabilization technology.
4.It incorporates an innovative piston fuel pump, enabling the use of a wider range of test fluids.
5.It uses a 50mm diameter corrosion-resistant borosilicate tube, enhancing the observation of injection performance during testing.
6.It supports an adjustable backlight function.
7.It enables zero-pressure connection and disconnection of the injector.

Product Features
This fuel injector test unit is designed to test a range of modern automotive fuel injectors, including the
latest model GDl injectors. This unit features a range of innovative technical designs distinguishing itself
from othersimilar units on the market.

●An LCD control panel which enables all operations to be configured in one display area.
●An inbuilt high accuracy digital pressure sensor with closed-loop pressure control circuit.
●Unique Air-Lock pressurebalancing & stabilizing technology.
●An inbuilt Innovative piston fuel pump which enables the use of a wider range of test fluids.
●Dim.50mm toughborosilicate tubes forbetter observation of spray-ability pressure connection and disconnection of the voltage: AC 90-240V 50/60Hz
Power: Maximum 150W
Ambient temperature: -5°C to +50°C
Tank capacity: Maximum 1500 mL
Output signal: Low PFI / High PFI / GDI
Dimensions and weight: 8.00*34.5*45 cm, 11.8 kg
Pulse width: 4000–9900 micro seconds
Ultrasound: Maximum 60 W, frequency 28 kHz–46 kHz
Pressure: 0–20 bar

Power : Max 150W
Test Fluid Tank: Max 1.5L
Output signal: : RPM 120-2400 step 120
Pulse Width : 4000~9900us
Pressure : 0~20Bar
Unit :Bar, Kpa, PSl, Kg/cm2
Ultrasonic Bath should I use ANCEL JC400/JC600?

1- Power Socket
The injector test bench is compatible with a wide input range from 90V to 240V AC 50/60Hz.

2- Test Fluid Level Gauge & Drain Hose
The Injector test bench comes with 1.5L fluid tank. Note the fluid level when refilling. Make sure that the fluid level does not exceed the max line. Remove the hose to drain the test fluid, as needed. When unboxing the injector test bench, the rack that fixes the hose may need to be mounted.

3- Ultrasonic Fluid Drain Hose
Remove the hose to drain the test fluid, as necessary. When unboxing the injector test bench, the rack that fixes the hose may need to be mounted.

4- Control Panel
Please refer to the Control Panel section for detailed operating instructions.

5- Signal Output
From left to right, the signal indexes are #1 to #4, on which the signal cords shall be mounted.

6- Cylinder Seal Switch
Lift up the cylinder seal switch to seal the cylinders, and pull it down to release, so that the cylinders can be drained as needed.

7- Locking Nut
For locking the fuel distributor. To remove, move the locking nut 1cm higher so that the fuel distributor can be taken off.

8- Test Fluid Delivery Hose
This hose extends from the piston fuel pump, to supply test fluid to the fuel distributor. This must be mounted before starting to use the test bench. Once mounted, it is not necessary to take it off.

9- Pressure Balancing & Stabilizing Hose
This hose leads to the air-lock pressure balancing & stabilizing assembly. It is designed to push air out of the fuel distributor to ensure no air remains in the distributor.

10 - Fuel Distributor
The fuel distributor has an inbuilt Φ13 fitting. Injectors of this size can be mounted to the distributor directly, while other injectors will need to use adapters. Please refer to the Accessories section for adapter details.

11 - Ultrasonic Bath
The Ultrasonic Bath must not be activated unless there is fluid in the bath, filled to the minimum level. To activate the ultrasonic bath, at least one injector must be connected to the signal cord, or else this may cause an error. Put injectors into the basket, then put the basket into the ultrasonic bath. Otherwise, there is a risk that the shock created by the activated injectors may damage the ultrasonic bath. Drain and clean the Ultrasonic Bath after use.

12 - Fuel Distributor Mounting Ports
There are two sets of mounting ports for the fuel distributor. The set in the middle is for regular injectors, the other set are for injectors where the feed port and nozzle are not vertically centered, e.g. Siemens Piezo.

Operating Principles
Theinjectortestbench isdesigned to enableausertoclean and diagnoseif theinjectorsof injectorsfrom the engine and mounting then onto thefuel deliver the desiredfuelpressure,and thePCBwould createproper drive signals to theinjectors.By simulating the working condition,the user can observe theleakage/spray/flowresult to compareif thetested set of injectors areconsistent witheachother.

Deployment Workplace
The injector test bench should be installed on a flat surface,away from flames and sparks.
In case the injector test bench needs to berelocated,you must first drainany remaining test fluid from the unit.

ANCEL JC200 2-Cylinder Injector Tester Machine for Car & Motorcycles, Pressure Adjustment Built-in Air Pump 12V Auto Motocycle Tester Tools

Fuel injector diagnose equipment is a mechatronic product that combines mechanical and microcomputer signal output technology. This product simulates various operating conditions of the engine, and inspect the fuel injectors of various motorcycles & cars .

JC200 Key Features:

● LCD Digital display

● 12V battery powered

● Fuel injection volume testing

● Fuel injection uniformity and atomization performance testing

● Manual testing

● Automatic testing

Item Parameters
Operating Voltage: DC12V
Fuel Tank Capacity: 150ML
RPM: 100-9900 rpm
Duration: 30-600 seconds
Pressure: 1.2-1.5 bar
RPM: 100-9900 rpm

Operating Instructions
1. Remove the injector nozzle from the vehicle.
2. Place the injector nozzle into the ultrasonic tank for cleaning.
3. Reinstall it into the inspection window for fuel injection testing, allowing direct observation of fuel spray and atomization.
4. Cleaning results can be directly observed on the Main functions

✅ (1) Uniformity test: to check uniformity of the injections.
✅ (2) Atomization observation: with help of the backlight, you can observe the spray atomization situation of the injector in a comprehensive and careful manner.
✅ (3) Tightness test: it can detect the tightness and dropping of the fuel injector under working pressure.
✅ (4) Fuel injection volume detection: it can detect the fuel injection volume of the injector under specific working conditions.

🔥 Main features

✅ (1) Low-cost solution of injection test.✅ (2) Use pressurized air to push test fluid, ensure stable pressure output,
achieve consistence in test conditions.✅ (3) DC12V power supply, enhance portability of the product.✅ (4) The oil tank liquid level is displayed visually, and the test agent can be
recycled.✅ (5) Bright background light, you can clearly see the various situations of the
fuel injector when it is working.✅ (6) Replaceable composite joints for different injector type.

🔥Technical specifications

Power supply: DC12V Vehicle Battery, 2AmpRelative humidity: <85%Environment temperature: -5oC ~ + 50oCTank Capacity: 150mlCylinder Volume: 100mlRPM: 100~9900 step 100Time: 30~600 SecondsOil Pressure: 1.2~1.5bar (Fixed)Pressure relief: Manual

Operating Instructions

1. Button Functions:

a) -: Time adjustment / Speed adjustment.

b) +: Time adjustment / Speed adjustment.

c) MODE: Mode key, cycles through modes (Manual mode M, Automatic mode A).

d) START: Start/Stop key, short press to start when stopped, short press to stop when running.

2. Indicator Functions:

a) M: Manual mode.

b) A: Auto Mode.

3. Operation Instructions:

a) In stopped state, briefly press “MODE” to switch to M mode. Use “+/-” keys to adjust output speed (range: 100-9900 RPM). Briefly press “START” to activate operation at set speed.

b) In stopped state, briefly press “MODE” to switch to A mode. Use “+-” keys to adjust timer duration (30-600 seconds). Briefly press “START” to activate. Speed automatically adjusts within 500-6000 RPM range at +/-100 RPM increments every 0.5 seconds, stopping automatically upon countdown & Returns & RefundsTerms of salesAbout usContact usPaymentWe only accept official payment methods. Please complete payment promptly. Unpaid orders will be canceled automatically to restock inventory. All refunds will be processed via the original payment method.

Shipping & Returns & RefundsOrders will be shipped within 1–3 business days after payment is confirmed. Tracking information will be uploaded timely. Shipping service is fully trackable. We will assist buyers with claims for lost, damaged or delayed parcels. Item condition and quantity are confirmed correct upon buyer’s signature receipt.1) We offer a 30-60 day return window per Money Back Guarantee policy. 2) Seller’s fault : full refund with seller covering all shipping fees. 3) Returned items must be in original condition, complete with original packaging and accessories, unused and resellable. Otherwise, refund may be declined.4) Refund will be issued within 3 business days after we receive and inspect your return. Terms of sales

All transactions are subject to the latest official policies. Disputes are preferred to be resolved via friendly negotiation, and both parties agree to ’s final judgment.

About us

ANCEL was founded in 2013, born from a simple yet steadfast idea:
to enable every car owner, automotive enthusiast, and professional mechanic to quickly and accurately understand their vehicle’s condition, without being held back by complex automotive diagnostic technology.

We believe that automotive diagnostics shouldn’t be limited to professional repair shops.
Starting with our first OBD2 scan tool, we have evolved into a full-range brand, with products spanning automotive diagnostics, battery testing, heavy-duty truck scanners, motorcycle fault code readers, and comprehensive vehicle maintenance solutions.

Everything we build stems from real-world repair scenarios. Every software update, hardware upgrade and user interface tweak is designed to cut down guesswork and give drivers full visibility into their vehicle’s health. For years, we’ve served automotive communities across North America with consistent, precise diagnostic equipment that balances powerful professional functionality with simple, easy-to-navigate operation.At ANCEL, our promise is simple: take the stress out of car troubleshooting, so you can hit the road with total confidence.Contact us

Our customer-oriented service strives for positive responses with all 5 star selling ratings.

Please feel free to contact us via message once you have any question before you giving us negative response or open case.

We will reply in 24 business hours.

Business time: GMT8 (9:00-18:00) from Monday to Friday.

On Sep 15, 2026 at 20:17:10 PDT, seller added the following information: