Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

Zero Corner Edge Finder probe touch plate magnetic CNC Router 6090 MACH3 GRBL

Zero Corner Edge Finder probe touch plate magnetic CNC Router 6090 MACH3 GRBL
$35.59

Buy Now

Zero Edge Corner Finder Magnetic Assembly with Probe port UPGRADE 6040T MADE IN USA
Note:
This assembly includes an upgrade kit for those systems that don\'t have an external probe connector port.Using the probe upgrade kit will require opening the controller box, drilling a hole in the back for the connector, and connecting the wires to the controller board in the appropriate places. Finding the appropriate connection places may be difficult. As a result, you should determine if the upgrade is within your skill set before buying this item.The Zero Corner Edge Finder is a major enhancement to your CNC machine and work strategy. It allows you to precisely locate and relocate the X=0 & Y=0 corner of your work piece. It is also useful for reliably finding the top surface Z=0.
The Edge Finder uses a circular hole to find the X & Y edges by finding the center of a hole that is directly over the corner. The process is easy, fast, accurate, and repeatable.
Locating the center of the hole eliminates the need to know the tool diameter or the thickness of the edge-finder to find both X=0 & Y=0 accurately.
Magnetic connector is FASTER and SAFER than an alligator clip. The magnet instantly connects to the spindle nut (no size limitation), and should you accidentally power on the spindle with it connected, it will safely pop-off. An alligator clip can cause considerable damage to you, the finder cable, and your CNC. This port kit is compatible with most CNC controllers that support a probe input and software including MACH3 and GRBL.Sophisticated program modules for Mach3 allows measuring any surface of your work-piece.
Sample programs for the GRBL systems are available to get you up and running smoothly. Specifications:
- The Edge Finder is about 3\" x 2\" (75mm x 50mm).
- The small hole is 3/8\" (9.5mm) diameter centered over the corner (X=0, Y=0) and is perfect for an 1/8 in. bit or probe.
- The large hole is 3/4\" (19mm) in diameter located at X0.50 & Y0.50 inches (X12.7 & Y12.7 mm) from X=0 & Y=0, and is suitable for a 1/2\" bit. It is also perfect holding the Edge Finder in place while the program is hunting for the center.
- The plug is a standard GX12-2 male plug.- Cable is 6ft (1.8m) long. Cord may be white, brown, or clear. (100% stranded copper)
- Magnetic clip with super strong magnet connects effortlessly and safely to the spindle nut.
- Built in cord strain relief for improved reliability.There is nothing worse than loosing your reference to the work piece by having your tool break or your stepper motors skip a beat, and having to start over with new material. Often times, when this happens, the work is not ruined, and if you could find again the original X=0, Y=0, & Z=0 you could save the work piece, a lot of time, and money. The Edge Finder allows you to relocate X=0, Y=0, & Z=0 to within 0.001 inch or 0.026mm. That is usually a win situation. If you try to set X=0, Y=0 and Z=0 by sight or touch to paper, you will not be able to repeat better than 1mm or 0.040 inch, which will ruin your work.It is incredibly hard to find the edges of a work piece that is non conductive like wood, plastic, or even anodized aluminum. The Edge Finder greatly simplifies that process while providing excellent precision and repeat ability. With the Edge Finder you can usually recover your X zero. Y zero, and Z zero to within 0.001 inch or 0.026mm (25X better than the sighting with the eye).The Edge Finder assembly Includes the Edge Finder, a magnetic probe clip, and a 6 foot cable terminated with a GX12-2 plug. It connects effortlessly to some 3020T, 3040T, and the 6040T controllers via the probe input jack located on the back. A free downloadable MACH 3 compatible script file is available that performs the find X=0, Y=0, Z=0 process with the click of the mouse and a touch of the keyboard. Over 7 functions to find the every conceivable edge.

To confirm compatibility with your CNC router, you will need to determine if it has eitherA) a GX12-2 female chassis connector labeled \'Probe\' on the back of the box, or if
B) there is no Probe connector, you are willing to modify your controller, and there is an internal connection that you can connect to. Help is available.If you are not sure how to find the appropriate location for a new port input, you can contact us and provide a few clear pictures of the controller inside that might allow us to determine the best way for you to successfully complete the upgrade.When You contact Vancura Innovations, you are contacting an experienced Electronics engineer, who has owned and operated a CNC machine for over 14 years.
We know CNC and use the products we sell. We care about your being satisfied with our Offers\" on single quantity purchases will be refused.
What you get:
1) This handy tool (EF104) comes complete with the Edge Finder, a magnetic probe clip, a 6 ft. (1.8M) cable terminated with a GX12-2 male plug,
2) One UPGRADE KIT consisting of a female GX12-2 chassis connector with a 8 in. (200mm) cord and a JST 2.5mm plug and header. Note: Sorry upgrade cable is only 8in. (200mm) long, picture is wrong)
Shipped USPS first class.You will also receive a link to:
  1. A powerful BASIC script file that allows MACH3 to directly operate the edge finding functions (7+ finding functions. Automatically compatible with both metric and Inch systems).
  2. Sample G-Code for both MACH3 and GRBL systems. Available in both inch and metric mm formats.
  3. On-line access to a modified MACH3 \'Program Run\' screen that adds an indicator next to the \'Auto Zero Button\' to indicate touch condition, which is a great aid to making sure it will work properly every time you use it. Help button for trouble free operation. A help button just in case.
  4. On-line access to instructions and pictures for setting up both the edge finder and MACH3 for the edge finding process.

If you Contact Us.
Send comprehend able questions, and, whenever necessary, clear photos, Our Engineer will respond as best as he can.
HOW to DRILL a LARGE HOLE in the Chassis A 12.7mm (1/2 inch) hole is a large hole when it is in a thin metal panel.
Should you need to drill a large hole on the panel, here is what you should do.1) Decide where you want the hole. Mark its location center with a pencil or pen.
A) It should, if possible, be in line with other connectors and spaced so as to look nice when you are done.
B) There MUST be NOTHING behind hole location for at least 4 inches (100mm). which would prevent the jack from installing properly.
C) You also don\'t want to drill a hole in anything but the chassis.
D) Make sure that you DO NOT get any metal chips in the works. Some people recommend a wad of putty on the back side of the panel where the drill will come through. Others believe that a fat sponge will keep the chips at bay. DO NOT use your hand to catch the chips! The blood is much harder to clean up than the chips. E) If you can get one, get a step-drill-bit. It is specifically designed to drill large holes in sheet metal. If you use standard twist drill bits, the bit will want to pull through the panel and will require you to be very careful not to let the drill get away from you.
2) Drill a small hole first. Start with 3mm or 1/8th inch or smaller bit. The small drill size will make sure the finished hole will be where you want it.
3) Drill a slightly larger hole and repeat until you have the finished size 12.7mm (1/2 in) hole.
4) File or sand the edge of the hole to remove some rough surfaces and burrs.
5) Now you can install the jack and tighten the nut to prevent the jack from turning.
6) (Very important) Admire the beautiful job you machines are dangerous and unforgiving. Count your fingers before and after each use, and make sure you get the same count. Always use safety glasses and hearing protection.

Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design