Woodpecker ECOM Cordless Endomotor with Automatic Reverse Function

Description
Woodpecker ECOM Cordless Endomotor with Automatic Reverse Function

Woodpecker Endo Gold Endomotoris mainly used in Endodontic treatment.During root canal preparation procedure,it is used to mold & clean the root canal.

ADVANTAGES:

OLED display

a) Customized program sequencenumber 1-9, totally 9 programs
b) Operation mode
c) Battery consumption
d) Set speed
e) Set torque
f) File system
g) Operation mode
h) Torque setting
i) Real-time torque

Protective function of automatic reverse

During operation, if the load value exceeds the preset torque value, thefile rotation mode will automatically change to Reverse Mode. And thefile would return to normal rotation mode when the load is below thepreset torque value again.

a) Clockwise rotation:Load value is lower than preset torque value
b)Counterclockwise rotation:Load value is higher than preset torque value.
c)Clockwise rotation:Load value is lower than preset torque value again.

INDICATION:

• The device is suitable for shaping the root canals during root canal treatment & an advantage in replacing the hand files to rotary endodontics.

CONTRAINDICATION:

• Patients with implanted pacemakers (or other electrical equipment).

FEATURES:

• Adopt real-time response technology and dynamic torque control,effectively preventing needle breakage.
• Storage of 9 user-defined modes allows invocation at any time.Under each mode, Continuous Rotation Mode, Reciprocating MotionMode, and Reverse Rotation are for options.

KEY SPECIFICATIONS:

TECHNICAL SPECIFICATIONS:

BatteryLithium battery in handpiece: 3.7V /1400mAh

Power adapter

Input: ~100V-240V 50Hz/60Hz 0.4A MaxOutput: DC5V/1ATorque0.6Ncm-5.0Ncm(6mNm ~ 50mNm)Rotate speed100rpm~1000rpmEnvironment temperature+5°C ~ +40°CRelative humidity30% ~ 75%Atmospheric pressure70kPa ~ 106kPa

Storage:

• This equipment should be stored in a room where the relativehumidity is 10% ~ 93%, atmospheric pressure is 70kPa to106kPa, andthe temperature is -20°C ~ +55°C.
• Avoid the storage in a too hot condition. High temperature willshorten the life of electronic components, damage battery, reshape or melt some plastic.
• Avoid the storage in a too cold condition. Otherwise, when the
  temperature of the equipment increases to a normal level, there will bedew that will possibly damage PCB board.

Oiling of contra-angle:

Only the original oil injection nozzle can be used for oiling of contra-angle. After disinfection of contra-angle and before sterilization, oilingshould be conducted under high pressure and high temperature.

• screw the injecting nozzle into jet of oil bottle. (Around 10
  circles)
• Plug the nozzle into the end part of contra-angle, and then
  grease the contra-angle for 2-3s till the oil flow out of contra-angle head
  part.
• Vertically place the end part of contra-angle or tilt the contra-angle to
  let go the redundant oil under gravity.

PACKAGING:

• 1 x Endomotor Handpiece
• 1 x Charging Base
• 1 x Contra-angle
• 1 x Power Adapter
• 1 x Lubricator
• Instructional Manual

Disclaimer

\"The sale of thisitem may be subject to regulation by the U.S. Food and Drug Administration andstate and local regulatory agencies. If so, do not offer on this item unless youare an authorized purchaser. If the item is subject to FDA regulation, I willverify your status as an authorized purchaser of this item before shipping ofthe item.\"

Business Information

Name- WAHEGURU ENTERPRISES

City - JAMAICA

State- NY

Contact Number- +1 (585)-632-1529