Overview
The Warp9 Ethernet SmoothStepper is an external motion controller that connects to the control PC over Ethernet and takes over pulse generation from the computer. It is one of the most widely used motion controllers in hobby and light industrial CNC, and it is what the CNC4PC C25 and C25XP boards are built around.
Features
- External motion controller with Ethernet connection to the control PC.
- Takes over step and direction pulse generation from the PC.
- Works with Mach3 and Mach4 via plugin.
- Pairs with the CNC4PC C25 terminal board, which takes the ESS directly into onboard sockets with no ribbon cable and no separate power supply.
Compatibility
Works with Mach3 and Mach4 via the Warp9 plugin. The CNC4PC C25 and C25XP are designed to take it directly.
Why an external controller
A PC is a poor pulse generator. Windows was never designed to hit microsecond timing, and a parallel port setup pays for that in lost steps and speed limits. The ESS moves pulse generation off the PC entirely, which is what lets you run a modern computer and still get clean motion.
Shipping and support
Ships from Port Saint Lucie, Florida. Supplied and supported by CNC4PC. Setup questions are answered by engineers who use this hardware every day, not by a call centre.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.