Overview
The C25 is a terminal board for the Warp9 Ethernet SmoothStepper. It gives you full access to the SmoothStepper pins through screw terminals and conditions the signals for CNC use, with the SmoothStepper plugging straight into onboard sockets.
Features
- 34 inputs and outputs across 2 ports.
- Full access to all the pins of the SmoothStepper board.
- Connects directly to the SmoothStepper from Warp9. Onboard sockets take the board directly, so no ribbon cables are required, and no additional power supply is needed since the board draws power from the SmoothStepper.
- Built-in passive low pass filters on all inputs, reducing the effect of noise from drives and other devices on the input signals.
- All TTL 5VDC signals, interfacing directly with parallel port products and other CNC4PC cards.
- Input and output pins with close-by ground connections.
- Screw-on connections for all terminals.
Compatibility
Designed for the Warp9 Ethernet SmoothStepper (ESS). Sold separately.
Why the C25
The SmoothStepper has pin headers, not a machine. The C25 is the board that turns those headers into labelled screw terminals with low pass filtering, powered from the SmoothStepper itself. If you have bought an ESS, this is the layer between it and your drives.
Shipping and support
Ships from Port Saint Lucie, Florida. Designed and manufactured by CNC4PC. Manuals, wiring diagrams and configuration files are available from CNC4PC, and setup questions are answered by the engineers who design and build the board.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.