Ultrasonic Fuel injectors Cleaner Tester Car Motorycle Injector Cleaning Machine

AUTOOL CT150 Fuel Injector Cleaner allows four fuel injectors to operate simultaneously. It features 12 functions for comprehensive cleaning and testing of fuel injectors, thoroughly removing carbon deposits. The cleaning functions include ultrasonic cleaning and reverse flushing of the fuel injectors. This device offers multiple test modes (such as idle, medium speed, high speed, acceleration, and leak detection) to simulate various engine operating conditions. It is widely compatible with fuel injectors for 12V vehicles, and the operating voltage range is 110–230V. Whether you run an auto repair shop or are a DIY enthusiast, this is a convenient and versatile tool that helps you save time and avoid unnecessary expenses.

It is an expert in Injector solutions, featuring 12 injector-specific functions

01. Ultrasonic cleaning: It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors.

02. Idle speed test (0-20ms): Simulate the engine idling speed and test the state of the fuel injector.

03. Medium speed test (0-7.5ms): simulate the engine running at medium speed and test the state of the fuel injector.

04. High-speed test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector.

05. Acceleration test: Simulate the acceleration state of the car and test the performance of the fuel injector.

06. Shift speed test: Simulate the shifting state of the car and test the working performance of the fuel injector.

07. Leakage test: Test the sealing condition of the fuel injector.

08. Idle spraying test: Simulate the engine idling state and test the spraying performance of the fuel injector.

09. Medium speed sprayability test: Simulate the engine medium-speed state and test the spraying performance of the fuel injector.

10. High-speed sprayability test: Simulate the high-speed state of the engine and test the spraying performance of the fuel injector.

11. Reverse flush: Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector Strainer (Only for the top fuel supply injector).

12. No-disassembly cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters.

Fuel Injector Tester & CleanerThe AUTOOL CT150 can be used to clean and test injectors. Ideal for removing carbon deposits from fuel systems, with leak testing, sprayability testing, and injection flow testing.Ultrasonic cleaning
It works by sending an ultrasonic vibration signal to the fuel injector through a pulse signal line, so that the stubborn carbon deposits shake strongly and are removed more thoroughly.Multl-Progress4 injectors can be tested and cleaned at the same time, all at once. In addition, it can be used with 6 cylinders, and two tests are sufficient.Cleaning fluid recovery valveAfter the cleaning is completed, the cleaning fluid needs to be recovered through the valve, which has the advantage of:1. Damage will be caused to the product of the liquid is left inside the cleaning bath for a long time.2. The recovered liquid can be reused, thus saving your cost.Widely Applicable
Support for 99.99% petrol car & Motorcycle injectors testing and cleaning.Cleaning and test motorcycle injector,testing function for HONDA YAMAHA SUZUKI SANYANG injectors onlyWithout disassembly
The CT150 supports back-cleaning of the injector and cleaning of the injector without disassembly Operating Voltage
This tool supports 110V or 220V power supplies and is suitable for a variety of scenarios.Reverse Flushing
The injectors on the fuel rail are installed in the opposite direction, allowing the test fluid to flow from the outlet to the inlet to achieve a flushing effect.Multifunctional Testing
For a two-cylinder engine, two plugs can be installed on the fuel rail to create a seal, while the other two cylinders can be tested normally.
CT150 Car Fuel Injector Tester Cleaner how to work:1.Pour in the injector detergent and place the injector nozzle in the ultrasonic cleaner tank.
2.Connect the pulse signal wire and select the ultrasonic cleaning function to remove the carbon deposit.
3.Pour in the test liquid, install the fuel injector to the oil separatorand fix it to the main unit by bolts.
4.Test whether the injector nozzle is leaking or blocked under different functions.Package includes:
1pc * AUTOOL CT150 Fuel Injector Cleaner Tester Main Unit;
1pc * Funnel
1pc * Ultrasonic Cleaning Bracket
1pc * Drain Valve
2pcs * Fixing Bolt
2pcs * Fixing Nuts
4pcs* Reverse flush connectors φ15.8mm
4pcs * Conical top inlet connectors φ10.5mm&13.6mm4pcs* Motorcycle Fuel Injector Adapter
4pcs *Adapter cables
1pc * Power Cable
1pc * Oil Separator
4pcs* Special injector gaskets
3pcs * Special plugs for oil separator
1pc * Ultrasonic Cleaning Cover
1pc * User ManualMORE PRODUCTSMORE PRODUCTSMORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY MORE PRODUCTS MORE PRODUCTS MORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY