Fuel Injectors Cleaner Tester Ultrasonic Injector Cleaning Machine Car Motorycle

AUTOOL CT150 Fuel Injector Cleaning and Testing Equipment. Its 12 key functions enable quick and thorough cleaning of fuel injectors, effectively removing carbon deposits and impurities to ensure precise and smooth fuel injection. Widely compatible with fuel injectors in 12V vehicles, using the AUTOOL CT150 not only enhances vehicle performance and fuel economy but also extends the service life of the injectors. The AUTOOL CT150 is an indispensable cleaning tool for professional repair shops and an essential cleaning tool for individual car owners alike.

It is an expert in Injector solutions, featuring 12 injector-specific functions

01. Ultrasonic cleaning: It sends signals to the injectors through the pulse signal line, using the cleaning fluid with the ultrasonic vibration so as to completely remove the carbon and impurities inside the injectors.

02. Idle speed test (0-20ms): Simulate the engine idling speed and test the state of the fuel injector.

03. Medium speed test (0-7.5ms): simulate the engine running at medium speed and test the state of the fuel injector.

04. High-speed test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector.

05. Acceleration test: Simulate the acceleration state of the car and test the performance of the fuel injector.

06. Shift speed test: Simulate the shifting state of the car and test the working performance of the fuel injector.

07. Leakage test: Test the sealing condition of the fuel injector.

08. Idle spraying test: Simulate the engine idling state and test the spraying performance of the fuel injector.

09. Medium speed sprayability test: Simulate the engine medium-speed state and test the spraying performance of the fuel injector.

10. High-speed sprayability test: Simulate the high-speed state of the engine and test the spraying performance of the fuel injector.

11. Reverse flush: Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector Strainer (Only for the top fuel supply injector).

12. No-disassembly cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters.

Support For 99% Cars & MotorcyclesSupport for Audi，for Australia Ford，for Benz，for BMW，for Brilliance，for Chevrolet，for Chevy，for Chrysler，for Citroen，for Dacia，for Dadi，for Daewo，for Daihatsu，for Demo，for Fiat，for Ford，for GM，for Holden，for Honda，for Hyundai，for Isuzu，for Jaguar，for Kia，for Lancia，for Land Rover，for Mahindra，for Maruti，for Mazda，for Mitsubish，for Nissan，for Opel，for Peugeot，for Porsche，for Renault，for Romeo，for Rover，for Saab，for Seat，for Skoda，for Smart，for Subaru，for Suzuki，for Tata，for Toyota，for Volvo，for VW，for Yamaha.Full inspection of injectors
Uniformity test: To test the uniformity of injecting amount of each injector.
Sprayability test: To monitor the spraying status of each injector with the help of backlight.
Leakage test: To test the sealing and dribbling conditions of injectors under high pressure.
Injecting flow test: To check the injecting amount of the injector of specific injection condition(eg. same time and number of times).Ultrasonic Cleaning
This unit is equipped with a built-in ultrasonic mechanism, which is a different type of cleaning method. Instead of conventional cleaning methods, it precisely sends an ultrasonic vibration signal to the injector through a unique pulse signal line. This ultrasonic vibration intensively shakes and disintegrates stubborn carbon deposits, resulting in a deeper and more complete cleaning effect.Reverse Cleaning & On-Vehicle CleaningOn-vehicle cleaning: The unit is equipped with various adapters and couplers that facilitate cleaning on the injectors on vehicle.
Reverse flush: Reverse flush is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector strainer (Only for the top fuel supply injector).Multi-ProgressIt is equipped with four cylinders (four pipes), which allows four injectors to be tested simultaneously. For two-cylinder engines, when using the AUTOOL CT150 to test two injectors, the plugs mounted on two cylinders are used to achieve sealing of the cylinders and the remaining two cylinders can be tested normally, according to different needs.New upgrade panel
AUTOOL CT150 is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.With the help of microcomputer control and digital display, the equipment makes possible automatic cleaning, testing injectors and real-time monitoring of the dynamic values.can make the system pressure fast restored to the default values.
Cleaning fluid recovery valve
After the cleaning is completed, the cleaning fluid needs to be recovered through the valve, which has the advantage of:
1. Damage will be caused to the product of the liquid is left inside the cleaning bath for a long time.
2. The recovered liquid can be reused, thus saving your cost.Q： How to choose test fluid?
A： It is recommended to use a professional automotive injector test fluid. If not available locally, it is recommended that industrial or medical alcohol with a concentration of more than 90% be placed in a glass tube
Q： How to choose cleaning fluid?
A： We recommend using a professional syringe ultrasonic cleaning fluid, such as the \"3 M\" brand, which can be purchased at your local store.Q：Which injectors can be cleaned and tested by the device?
A：Hello, cleaning function: Supports cleaning all normal injectors.Testing function: Supports testing only normal gasoline injectors, not diesel injectors, high pressure direct injection injectors with side inlet in cylinder and GDI injectors.Package includes:
1pc * AUTOOL CT150 Fuel Injector Cleaner Tester Main Unit;
1pc * Funnel
1pc * Ultrasonic Cleaning Bracket
1pc * Drain Valve
2pcs * Fixing Bolt
2pcs * Fixing Nuts
4pcs* Reverse flush connectors φ15.8mm
4pcs * Conical top inlet connectors φ10.5mm&13.6mm
4pcs *Adapter cables
1pc * Power Cable
1pc * Oil Separator
4pcs* Special injector gaskets
3pcs * Special plugs for oil separator
1pc * Ultrasonic Cleaning Cover
1pc * User ManualMain Function:
A Use ultrasonic cleaning to clean the injector
B Clean the spark plug: Put the spark plug into the cleaning tank, enter the cleaning solution and start cleaning
C Test the injection of the injector in different situations, check for leakage and blockage
D No need to disassemble and clean the injector (additional accessories and additional costs are required, please choose by yourself)
E No need to disassemble and clean the throttle valve. (Additional accessories and additional costs are required, please choose by yourself)
F Clean and test motorcycle injectors, test function is only available for Honda Yamaha Suzuki Sanyo injectors
MORE PRODUCTSMORE PRODUCTSMORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY MORE PRODUCTS MORE PRODUCTS MORE PRODUCTS MORE PRODUCTS 3 YEARS WARRANTY