The listing is for an original NTSC USA/Canada Nintendo front loader home console only - no AC adapter, video cables, controllers or games. The console has received the following refurbishments/services:
1) The entire shell has been cleaned with an ultrasonic cleaner and has received UV Ray protectant spray treatment.
2) It has been serviced with Tim Worthington’s NESRGB kit version 5, using a SNES style multiout to output RGB, using TTL Csync, as well as S-Video & Composite video.
3) The original 7805 voltage regulator has been replaced with a brand new 7805 voltage regulator for optimal performance.
4) The lock-chip has been disabled.
5) Greg Collins' SNES style black multi out has been used as the video and audio output.
6) Wired for wireless palette changer via controller that includes ten different palettes via controller combination (see below).
7) Wired for wireless IGR (in-game-reset) via controller combination (see below).
8) All electrolytic capacitors in the RF module and the motherboard have been replaced with quality Nichicon and Panasonic branded capacitors.
9) The OEM 72 pin connector has been professionally cleaned and refurbished.
10) Expansion audio has been added.
Console has been tested using fully shielded with SNES TTL Csync (Resistor on the Csync line) scart cables with the OSSC upscaler, as well as with HD Retrovision SNES component cables. SNES S-Video and composite cables have also been used and tested on a CRT TV.
Controller Functions:
1) On-screen menu
To activate the on-screen menu, on the player one controller, press and hold d-pad down + select button for more than one second, but less than three and release. When in the menu, up and down on the d-pad will select the menu item, left and right on the d-pad will change the value if the item, the select button will exit the menu and save all the values. What follows is a list of every menu item and its purpose.
2)Audio from cartridge
If the cartridge audio mixing is wired up on a NES console, the audio input pin will be unconnected when the console has a NES cartridge inserted. To prevent noise from this unconnected input being mixed into the audio circuit, you can turn it off here.
3) Vertical position
Adjust the vertical video position up to +/- 15 pixels. Works on RGB, component, and s-video outputs, but not composite. Sync fix must be enabled too.
4) Horizontal position
Adjust the horizontal video position up to +/- 15 pixels. Works on RGB, component, and s-video outputs, but not composite. Sync fix must be enabled too.
5) In-game reset
You can enable/disable this feature.
6) In-game palette select
You can enable/disable this feature.
In-game palette select
If this is enabled, you may select the next palette by pressing start + select + dpad right or the previous palette with start + select + dpad left without having to enter the menu. As long as you hold start + select, you can keep tapping left or right on the dpad to cycle through the palettes. The palette name will briefly show up on the screen.
Colour palette
There are ten colour palettes to choose from.
Generated NTSC
Generated PAL
These two were made with the Pally NES palette generator.
Nestopia YUV
This was included with the very first version NESRGB board because it was the most accurate PAL style palette on the internet in 2013. This and Generated PAL are the only two PAL style palettes of the ten.
SmoothV2
Digital Prime
These two were created by Firebrandx with attention to accuracy. More info here.
Pixeltao CRT
Handmade palette, increased colour vibrancy.
Sony CXA
An even more colourful palette of unknown origin.
FCEUX
A colourful, but inaccurate palette that this popular emulator uses.
Dark Power
This one is actually called Toshiba CF2005 1985 Dark Powergamma Beta 2025/05/26, which I have shortened to Dark Power. It's from this Nesdev forum thread. I've never seen a dark palette like this before - it looks very odd!
Playchoice
This is the palette from a NES compatible arcade system called the Nintendo Playchoice. The original hardware had a three bit per channel video DAC. As a result, it has an excessively colourful palette. The palette itself is from Nestopia.
7) Sync fix
Formerly known as de-jitter. The NTSC PPU is short by one pixel every second frame of video. This apparently makes the composite video signal look better, but causes problems with digital that don't expect it. Turning this feature on will make all video frames the same size. This has no effect on PAL consoles. Must be enabled to use horizontal/vertical position controls.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.