The listing is for the buyer to send me their working NTSC - USA/Canada Nintendo top loader home console & 3D SNES style multi out rear panel in order to receive the following refurbishments/services:
1) The motherboard will be cleaned with 91% isopropyl alcohol.
2) Console will be serviced with Tim Worthington’s NESRGB kit version 5 (this board is included) using a SNES style multi out (from Laserbear Industries) to output RGB (either attenuated 75 ohm terminated Csync or unattenuated TTL Csync - you must tell me which if you need Csync), S-Video & Composite video.
3) All electrolytic capacitors on the motherboard will be replaced with brand new Nichicon and Panasonic branded capacitors.
4) Wired for wireless palette changer via controller that includes six different palettes: Digital Prime, Nestopia YUV, Sony CXA, Smooth V2, FCEUX, & Wavebeam via controller combination (see below).
5) Wired for wireless IGR (in-game-reset) via controller combination (see below).
6) 3D SNES style multi out rear panel will be used for audio & video output (this is NOT included - you must provide this item).
7) The original 7805 voltage regulator will be replaced with a brand new 7805 voltage regulator for optimal performance.
8) Expansion audio, using Voultar’s board and Firebrandx’s NESRGB audio mix, will be used.
9) LED service (if requested) - choices of either slow-rotating RGB, purple, blue, green or red color.
Button Combinations:
Start+Select+Left - Decrement palette counter.
Start+Select+Right - Increment palette counter.
Start+Select+Left (hold for 2 seconds) - Disable/enable NESRGB board.
Start+Select+Right (hold for 2 seconds) - Set to palette 1.
Start+Select+A+B - In game reset.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.