6 Inch Oval LED Stop / Tail / Brake Light Kit
Two - Maxxima Red 6\" Oval Low Profile LED Stop Tail Brake Lights with Two Grommets
SKU: M63350R + M50607-LOTOF2
This listing includes two Maxxima red oval LED stop / tail / brake lights and two matching low-profile oval grommets. Built for trailer, truck, RV, Jeep, service body, and utility lighting applications where the 6\" oval size, 3-wire leads, and mounting style match.
2 Lights + 2 Grommets
14 Red LEDs Per Light
6.5\" W x 2.3\" H x 0.4\" D
Overview
The Maxxima M63350R is a red 6\" oval LED stop / tail / brake light with a slim 0.4\" profile, 14 LEDs, and 3-wire 6\" leads. This two-light kit also includes two Maxxima M50607 low-profile oval grommets for compatible grommet-mount installations.
R&P Service Insight
Low-profile oval lights are commonly used when a standard-depth oval light takes up too much space behind the panel. Before replacing an existing light, match the body size, wiring, and mounting method rather than ordering by appearance alone.
- Check the Opening: Confirm the cutout or mounting area accepts a 6\" oval low-profile grommet setup.
- Check the Wiring: This light uses 3-wire 6\" leads for stop / tail / brake function.
- Check the Mounting: This kit includes grommets, but the light can also be surface mounted with screws where that installation style is preferred.
R&P Knowledge Hub
Compatibility: Designed for 6\" oval stop / tail / brake light applications where the dimensions, wiring, and mounting method match.
Vehicle / System Fit: Commonly used on trailers, trucks, RVs, Jeeps, utility trailers, enclosed trailers, service bodies, and similar 12V lighting systems.
Installation Notes: Verify polarity and function wiring before final installation. Test stop and tail functions before sealing the light into place.
Performance Insight: The ultra-thin body helps reduce clearance issues behind panels while the included grommets provide a cleaner low-profile mounted finish.
Brand & Fitment Note
Selling Brand: Maxxima
Application Reference: Trailer, truck, RV, Jeep, and service body references describe common lighting applications only.
What This Means: This listing is for a Maxxima two-light kit with matching low-profile grommets, not a guaranteed OEM-branded replacement unless specifically stated for your application.
Before Ordering: Verify measurements, mounting style, wire count, available depth, and required lighting function before installation.
R&P Repair Insight
When replacing trailer stop / tail lights, most fitment issues come from mismatched mounting depth, wire count, or grommet style. Compare the existing light and opening before removing old wiring or cutting into the trailer body.
- Mounting Depth: This light is 0.4\" deep, making it useful for shallow mounting areas.
- Wire Function: Match the 3-wire leads to the correct tail and stop / brake circuits before final crimping or sealing.
- Grommet Fit: Use the included low-profile grommets only where the panel opening and light body are compatible.
Key Features
Two-Light Kit
Includes two Maxxima M63350R red oval LED stop / tail / brake lights and two compatible low-profile oval grommets.
Ultra-Thin 0.4\" Design
Low-profile body helps with shallow trailer panels, service bodies, RV panels, and tight mounting locations.
14 Red LEDs Per Light
LED design provides stop / tail / brake lighting for compatible 12.8 VDC vehicle and trailer systems.
Multiple Mounting Options
Can be mounted with the included low-profile grommets or surface mounted with screws where that installation method fits the application.
Specifications
Specification
Detail
Part Number
M63350R + M50607
Listing SKU
M63350R + M50607-LOTOF2
Brand
Maxxima
Product Type
Red oval LED stop / tail / brake light kit with low-profile grommets
Quantity Included
2 lights and 2 low-profile oval grommets
LED Count
14 red LEDs per light
Voltage
12.8 VDC
Amp Draw
230 mA
Fitment / Application
Category
Details
Vehicle / System
12V trailer, truck, RV, Jeep, utility trailer, enclosed trailer, and service body lighting systems
Primary Fit
6\" oval low-profile stop / tail / brake light applications where the light size, wiring, and mounting method match
Mounting Options
Low-profile grommet mount, surface mount with screws, or compatible adhesive tape mounting when used with the correct tape kit
Notes
Verify light dimensions, mounting clearance, wiring style, and existing opening before ordering.
Detailed Measurements
Key Dimension
Measurement
Overall Light Size
6.5\" wide x 2.3\" high x 0.4\" deep
Mounting Holes
2 mounting holes, each 3/16\" diameter
Mounting Hole Spacing
5-1/2\" center to center
Wiring
3-wire, 6\" leads
Included Components
Quantity
Item
2
Maxxima M63350R red 6\" oval low-profile LED stop / tail / brake lights
2
Maxxima M50607 low-profile oval grommets
Included with lights
Mounting screws and screw hole covers
Not Included
Adhesive mounting tape kit, wiring connectors, sealant, and installation tools
Important Fitment Note: This is a two-light kit with two low-profile grommets. Verify all measurements, mounting depth, panel opening, wiring style, required function, and included components before installation. Application references describe common fitment use only.
Shop Matching Maxxima 6\" Oval Lighting Parts
Match your replacement light by size, wiring, mounting style, and required function before ordering.
2 Maxxima M63350R red LED stop tail brake light with grommets, Maxxima M50607 low profile grommet kit, 6 inch oval red LED trailer light, low profile oval stop tail light, trailer brake light, truck LED tail light, RV oval LED stop light, Jeep trailer lighting, 14 LED red oval STT light, M63350R-LOTOF2, M63350R plus M50607
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.