LED Trailer Stop / Tail / Brake Lights
Two - Maxxima 6\" Red LED Ultra Thin Stop Tail Brake Lights
Part Number: M63350R-LOTOF2
This listing is for two Maxxima M63350-R red LED ultra thin stop, tail, and brake lights. These low-profile 6.5\" oval lights are built with sealed electronics, polycarbonate lens and housing construction, and 3-wire 6\" leads for trailer lighting applications where the size, wiring, and mounting style match.
Quantity: 2 Lights
6.5\" x 2.3\" x 0.4\"
3-Wire 6\" Leads
Overview
The Maxxima M63350-R is a red LED ultra thin stop, tail, and brake light for trailer and vehicle lighting applications. This two-light listing is a good choice when replacing both matching lights or installing a matched pair on a trailer where a 6.5\" x 2.3\" red oval light with 3-wire 6\" leads is required.
R&P Service Insight
Before replacing trailer lights, match the physical size, wiring style, and mounting pattern. A light can look close in a photo but still require a different grommet, adhesive mount, screw pattern, or wiring setup.
- Measure First: Confirm the 6.5\" width, 2.3\" height, and 0.4\" depth against your current light or mounting location.
- Check Wiring: This light uses a 3-wire design with 6\" leads.
- Choose Mounting: These lights can be mounted by grommet, tape, or screws depending on your trailer setup.
R&P Knowledge Hub
Compatibility: Designed for applications that use a red oval LED stop, tail, and brake light with matching dimensions, wiring, and mounting requirements.
Vehicle / System Fit: Trailer, truck, RV, and utility trailer lighting systems where the 12.8 VDC electrical system and 3-wire lead configuration match.
Installation Notes: Verify mounting hole spacing, mounting surface condition, wiring function, and required grommet or tape option before installation.
Performance Insight: The ultra thin 0.4\" low-profile design works well where a cleaner surface-mounted or flush-style lighting appearance is desired.
Brand & Fitment Note
Selling Brand: Maxxima
Application Reference: Replacement or new-install trailer lighting applications where the dimensions, voltage, wiring, and mounting style match the customer’s existing setup.
What This Means: This listing is for two Maxxima M63350-R red LED stop, tail, and brake lights.
Before Ordering: Verify measurements, wiring, mounting method, mounting hole spacing, and included components before installation.
R&P Repair Insight
When replacing trailer stop, tail, or brake lights, most fitment issues come from mismatched mounting style, incorrect wiring identification, or assuming all 6\" oval-style lights use the same mounting setup.
- Mounting Check: Confirm whether your trailer uses grommet mount, tape mount, or screw mount before ordering accessories.
- Hole Spacing Check: These lights have two 3/16\" mounting holes spaced 5-1/2\" center to center.
- Function Check: Confirm stop, tail, and brake wiring functions before final installation.
Key Features
Ultra Thin 0.4\" Low Profile Design
Low-profile depth gives the light a clean installed appearance and reduces protrusion from the mounting surface.
Polycarbonate Lens & Housing
Built with polycarbonate lens and housing construction for trailer and vehicle lighting use.
Completely Sealed Electronics
Sealed electronics help protect the light assembly in exterior trailer lighting applications.
Horizontal or Vertical Usage
Can be mounted horizontally or vertically when the trailer application, wiring, and compliance requirements allow it.
Specifications
Specification
Detail
Part Number
M63350-R
Listing SKU
M63350R-LOTOF2
Brand
Maxxima
Product Type
Red LED stop / tail / brake light
Quantity Included
Two lights
LED Count
14 LEDs
Voltage
12.8 VDC
Amp Draw
230 mA
Fitment / Application
Category
Details
Application
Trailer, truck, RV, and utility lighting applications requiring a red stop / tail / brake light
Mounting Style
Grommet, tape, or screw mounting where the mounting surface and hole spacing match
Wiring
3-wire design with 6\" leads
Notes
Verify light size, wiring style, mounting method, and mounting hole spacing before ordering.
Detailed Measurements
Key Dimension
Measurement
Overall Width
6.5\"
Overall Height
2.3\"
Overall Depth
0.4\"
Mounting Holes
Two 3/16\" diameter holes, 5-1/2\" center to center
Additional Technical Specs
Specification
Detail
DOT / SAE
J1395, J1398, J585e
Legal Lighting Codes
I6S2T2
Mounting
Grommet, tape, or screws
Orientation
Horizontal or vertical use where the application allows proper placement and compliance
Included Components
Quantity
Item
2
Maxxima M63350-R red LED ultra thin stop / tail / brake lights
Included
Mounting screws and screw hole covers
Verify Selection
Mounting grommet or mounting tape option, depending on the mounting setup ordered
Important Fitment Note: Price is for two lights. Order the mounting option needed for your trailer setup. Verify size, voltage, wiring, mounting method, mounting hole spacing, and trailer light function before installation.
Shop More Trailer Lights
Need a matching trailer light, mounting grommet, or wiring part? Search our store or contact us before ordering.
Maxxima M63350-R red LED stop tail brake light pair, M63350R-LOTOF2, two Maxxima red oval LED trailer lights, ultra thin 6.5 inch red LED brake light, 3 wire 6 inch lead trailer light, low profile trailer stop tail light, red LED trailer brake light, 12.8 VDC trailer lighting, DOT SAE red oval LED light, grommet tape screw mount trailer light
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.