|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Steck SPR Extraction Tool, Self-Piercing Rivet Removal, 1/2"-20 Grade 8 Bolt
$122.40

Steck STC21970 SPR Extraction Tool, Self-Piercing Rivet Removal, 1/2"-20 Grade 8 Bolt - The Steck STC21970 SPR Extraction Tool removes self-piercing rivets (SPRs) without expensive hydraulic tools. It has a high-grade, hardened steel frame and uses a 1/2"-20 Grade 8 hex bolt with a hardened tip to push out an SPR, driven with a 3/4" or 19mm socket on a 1/2" impact wrench. It lets the technician control the repair process without waiting for a hydraulic tool. Made in the USA.
- Features:
- High-grade, hardened steel frame.
- 1/2"-20 Grade 8 hex bolt with a hardened tip pushes out the SPR.
- Driven with a 3/4" or 19mm socket on a 1/2" impact wrench.
- Removes an SPR in about 3 to 5 seconds.
- Removes the need to wait for expensive hydraulic tools.
- Made in the USA.
- Application Notes:
- The 3/4" or 19mm socket and the 1/2" impact wrench are not included.
- Steck's procedure: (1) Follow the manufacturer's procedure to remove the trim panel and expose the SPRs. (2) Insert the hardened tip of the hex bolt inside the door, hand tighten the bolt to the center of the SPR back side, keeping the body of the tool against the door flange. (3) Install a 3/4" or 19mm socket on a 1/2" impact wrench and engage. (4) Within 3-5 seconds the old SPR comes out from the bottom. (5) Install rope hem on the door skin using the AI Skin Zipper (PN 21892) and on the window flange using the AI Skin Zipper 2 (PN 21896), or other tools per the manufacturer's instructions.
- WARNING: Cancer and reproductive harm. For more information: www.P65Warnings.ca.gov.
- Compatible Tools:
- 1/2" Impact Wrench
- 3/4" or 19mm Socket
- Steck AI Skin Zipper (PN 21892)
- Steck AI Skin Zipper 2 (PN 21896)
- Compatible Applications:
- Self-Piercing Rivet (SPR) Removal on Door Flanges
- Automotive Door Skin and Window Flange Repair
- Specifications:
- Manufacturer: Steck Manufacturing
- Part Number: STC21970
- Product Type: SPR Extraction Tool
- Frame Material: Hardened Steel
- Bolt: 1/2"-20 Grade 8 Hex, Hardened Tip
- Drive Socket: 3/4" or 19mm
- Drive Tool: 1/2" Impact Wrench
- Country of Origin: USA
- Quantity: 1
- This item is also often referred to as an SPR removal tool, self-piercing rivet extractor, SPR push-out tool, door flange rivet remover, and Steck STC21970.
Steck Manufacturing Company has designed collision repair tools in Dayton, Ohio since 1946, offering auto body, paint and body, lockout, towing, and specialty service tools. Q: What does the Steck STC21970 do? A: It pushes out self-piercing rivets (SPRs) using a 1/2"-20 Grade 8 hex bolt with a hardened tip, so hydraulic tools aren't needed. Q: What do I need to drive this tool? A: A 3/4" or 19mm socket and a 1/2" impact wrench; the socket and wrench are not included. Q: How long does it take to remove a rivet? A: Steck states the old SPR comes out within 3-5 seconds once the impact wrench is engaged. Q: What tools does Steck recommend after removing the rivets? A: Steck recommends the AI Skin Zipper (PN 21892) for the door skin rope hem and the AI Skin Zipper 2 (PN 21896) for the window flange.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|