Steck 21970 Self-Piercing Rivets Extraction ToolNo need for expensive hydraulic tools to remove and insert self-piercing rivets.
Steck’s newSPR Extraction Toolis a high-grade, hardened steel frame, that uses a 1/2” 20 grade 8 hex bolt, with hardened tip, to easily push out a SPR with your 3/4” or 19mm socket using your 1/2” impact wrench.
TheSPR Extraction Toolallows the technician to control the repair process without waiting in line for the very expensive hydraulic tools to do the same process.
1) Follow manufacturer procedures to remove the trim panel which exposes the SPR’s that need to be removed.
2) Insert the hardened tip of the hex bolt to the inside of the door, hand tighten the bolt to the center of the SPR backside, keeping the body of the tool against the door flange
3) Install your 3/4” or 19mm socket to your 1/2” impact wrench and engage.
4) Within 3-5 seconds you will see the old SPR come out from the bottom.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.