Renishaw SCR200 CMM Stylus Module Change Rack (TP200 Rack) New - 1 Year Warranty

Powered by FrooitionShop CategoriesOtherRenishaw ProductsRam Optical and OGPMasters and StandardsPrecision Measuring ToolsCMM and VMM Probing SystemsMachine Tool Probing SystemsCMM PartsVideo Measuring Machine PartsCoordinate Measuring MachinesVideo Measuring MachinesProfile Surface and RoundnessRenishaw SCR200 CMM Stylus Module Change Rack (TP200 Rack) New - 1 Year Item Description

New in Box Renishaw SCR200 Stylus Changing Rack with 1 Year warranty

Also included are new SCR200 Mounting Kit and SCR200 Location Plate.

The TP200 is a electronic probe using strain gauge technology which gives higher accuracy than kinematic touch trigger probes.

Renishaws current retail price for all that is included in this sale is $8670.00

About TP200

The TP200 system components are:

• TP200 or TP200B probe body (the TP200B is a variant with increased vibration tolerance)
• TP200 stylus module - choice of fixed overtravel forces: SF (standard force) or LF (low force)
• PI 200 probe interface
• SCR200 stylus changing rack

There is also an EO module (extended overtravel) which has the same overtravel force as the SF but provides increased operating range and protection in the probe Z axis.

Features and benefits

• Strain-gauge technology offers excellent repeatability and precision 3D form measurement.
• Zero reseat errors.
• No lobing effect.
• 6-way measuring capability
• Stylus reach of up to 100mm (GF styli)
• Rapid probe module changingwithout the need to re-qualify the stylus tips
• Life of >10 million triggers

TP200 / TP200Bprobe body

TheTP200 probe uses micro strain gauge transducers to deliver excellent repeatability and accurate 3D form measurement even with long styli.

The sensor technology gives sub-micron repeatability and eliminates the lobing characteristics encountered with kinematic probes. The solid state ASIC electronics within the probe ensure reliable operation over millions of trigger points.

The TP200B uses the same technology as TP200 but has been designed to have higher tolerance to vibration. This helps to overcome the problem of \'air\' trigger generation which can arise from vibrations transmitted through the CMM or when using long styli with faster positioning speeds.

Please note that we do not recommend the use of TP200B with the LF module or cranked/star styli.

TP200 specificationSummaryTP200TP200B

Principal application

DCC CMM where high accuracy is required.As TP200 but where \'air\' trigger events occur.

Sense directions

6-axis: ±X, ±Y, ±Z6-axis: ±X, ±Y, ±Z

Unidirectionalrepeatability (2sµm)

Trigger level 1: 0.40µm (0.000016in)

Trigger level 2: 0.50µm (0.00002in)

Trigger level 1: 0.40µm (0.000016in)

Trigger level 2: 0.50µm (0.00002in)

XY (2D) form measurement deviation

Trigger level 1: ±0.80µm (0.000032in)
Trigger level 2: ±0.90µm (0.000036 in)Trigger level 1: ±1µm (0.00004 in)
Trigger level 2: ±1.2µm (0.000047 in)

XYZ (3D) form measurement deviation

Trigger level 1: ±1µm (0.00004 in)
Trigger level 2: ±1.40µm (0.000056 in)Trigger level 1: ±2.50µm (0.0001 in)
Trigger level 2: ±4µm (0.00016 in)Repeatability of stylus changeWith SCR200: ±0.50µm (0.00002 in) max.
Manual: ±1µm (0.00004 in) max.With SCR200: ±0.50µm (0.00002 in) max.
Manual: ±1µm (0.00004 in) max.Trigger force (at stylus tip)XY plane (all modules): 0.02 N
Z axis (all modules): 0.07 NXY plane (all modules): 0.02 N
Z axis (all modules): 0.07 NOvertravel force (@ 0.50mm displacement)

XY plane (SF/EO module): 0.2 N to 0.4 N
XY plane (LF module): 0.1 N to 0.15 N
Z axis(SF/EO module): 4.90 N
Z axis(LF module): 1.60 N

XY plane (SF/EO module): 0.2 N to 0.4 N
XY plane (LF module): 0.1 N to 0.15 N
Z axis(SF/EO module): 4.90 N
Z axis(LF module): 1.60 N

Weight (probe sensor and module)22 g (0.78 oz)22 g (0.78 oz)Maximum extension (if on a PH10 series head)300mm (11.81 in)300mm (11.81 in)Maximum recommended stylus length (M2 styli range)SF/EO module:50mm (1.97 in) steel to 100mm (3.94 in) GF

LF module:20mm (0.79 in) steel to 50mm (1.97 in) GF

SF/EO module:50mm (1.97 in) steel to 100mm (3.94 in) GF

LF module:20mm (0.79 in) steel to 50mm (1.97 in) GF

Mounting methodM8 threadM8 threadSuitable interfacePI200, UCCPI200, UCC

Stylus module changing rack

Automatic: SCR200
Manual: MSR1

Automatic: SCR200
Manual: MSR1

Stylus rangeM2M2

TP200 stylus modules

The stylus module is mounted on the TP200/TP200B probe body via a highly repeatable magnetic kinematic joint, providing a rapid stylus changing capability and probe overtravel protection.

There are three modules available, with 2 different overtravel forces.

ModuleSF (standard force)LF(low force)EO (extended overtravel)ApplicationGeneral use.Small diameter stylus balls or where minimum force is essential.Extra overtravel to enable the CMM to stop safely from higher probing speeds.CommentsStyli up to 100mm long and ball diameter > 1mm.Balls less than 1mm diameter.

Same overtravel force as SF.

Extra 8mm of overtravel in probe Z axis.

SCR200 changing rack

The SCR200provides automatic, high speed changing of up tosix TP200 stylus modules. The SCR200 is powered by the separate probe interface, PI200, and provides features to facilitate safe stylus changing. The SCR200 is available in low force and standard force kits, where each kit comprises one SCR200 plusthree stylus modules of the same force.

SpecificationHeight190mm (7.84in)Width245mm (9.65in)

This is by the far the best price you will find on a new in box SCR200 in box with Warranty.

If you would like to add additional probing please do not hesitate incontacting us.

Why pay retail prices when you can purchase with warranty from Metrology Parts.

Purchase with confidence from a Paypal verified retailer with 1 Year Warranty

If what you order is not what you receive you will be refunded the full purchase price for this sale.

Metrology Parts would like the opportunity to earn your business for this sale and all of your future Renishaw needs.

If you have any questions feel free to contact us. With 36 plus years of experience with Renishaw products we can help with all of your application needs as well as your after sales support.

About Us

About Parts always strives for 100% customer satisfaction. If for any reason, you are unhappy with your purchase from us we would like to hear from you on how we could have improved your shopping experience.We understand that sometimes mistakes can be made in orders or sometimes there is buyer?s remorse. We have a 60 day return policy on all items. Please do be advised that all items need to be returned in original packaging with all manuals, certificates and unopened tool kits. If items have been installed and show installation marks we can only offer a partial refund on items we cannot resell as new or return to the factory.If you are having issues with equipment in your facility and are in need ofhelp troubleshooting prior to purchase, we offer free technical support to make sure the correct parts get ordered. Free technical support is also offered on all items purchased to make sure your installation goes smoothly.Should you need to return items purchased from Metrology Parts please contact us for an RMA, address we would like the item shipped and instructions on shipping your return to us safely.On behalf of Metrology Parts, we would like to thank you in advance for the opportunity to earn your business. Helpful Links Add to Favorite Sellers Sign up to Newsletter View response Contact Seller Visit seller\'s Shop About Seller Page More Items!View more great itemsRenishaw SP25M SM25-3 CMM Scanning Probe Kit 3 Fully Tested With 90 Day Warranty$3,250.00Renishaw TP20 NI CMM Probe Kit with 3 Extended Modules New in Box with Warranty$4,300.00Renishaw TP20 CMM Touch Probe Non Inhibit Body New in Box with One Year Warranty$1,165.00Renishaw MCR20 CMM Probe Module Change Rack - 2 Kit 3 New With 1 Year Warranty$5,500.00Powered by FrooitionFrooition Frooition | No-js Template | design, store design, shop design, template design, listing design (ver:froo_no_js)This listing is currently undergoi