[Note]
This board does not have a scaling function, and the output HDMI resolution is the same as the input RGB signal resolution, so for non-standard HDMI resolutions, the monitor connected to the back end may not support it!
If it is 6-bit input, connect R[7:2], G[7:2], B[7:2]; and R/G/B 0,1 to ground
[Overview]
This product is RGB888 to HDMI adapter board, using 50pin RGB FFC input, can convert the RGB signal of 7/9/10 inch industrial control screen to standard HDMI output. It can be applied to industrial equipment maintenance, control panel modification, DIY display expansion related use scenarios.
[Features]
Precise signal conversion: Stable conversion of RGB888 digital signals to standard HDMI output.
Dual Mode Input Connector:
50PIN FFC Input Connector: Supports RGB888 (24bit).
30P Pin connector(15x2 2.0mm connectors to be prepared and soldered by yourself): Supports RGB888 (24bit) and 6bit input.
Audio Integration: Provides digital audio I2S inputs to support simultaneous transmission of audio signals to HDMI outputs.
Dimensional clarity: Provides accurate mechanical mounting dimensions for easy integration into your equipment enclosure.
[Packing List]
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.