Note
️CRITICAL REQUIREMENTS (MUST READ BEFORE PURCHASE)
①This board does not have a scaling function, so if you want to use LVDS output to display the screen, the -compatible signalresolution must be consistent with the screen parameters.
②If you want to use RGB output to display the screen directly, you cannot display the screen directly. Usually, you need to provide VGH, VGL, AVDD, and VCOM to display the RGB screen.
Overview
This professional adapter converts Hdmi-compatible input signals into LVDS or TTL RGB output for directly driving industrial/DIY LCD panels. Equipped with a 3.5mm audio jack, it delivers analog stereo sound while supporting backlight control.The definition of the socket pin signal can be found in the characters on the back of the board.
Key Features
Suitable for converting Hdmi-compatible input signals to TTL RGB or LVDS outputs
with a maximum bandwidth of 340MHz
Support multi-resolution for Hdmi-compatible input
720P, 1080P, 4K@30Hz, etc.
Optional output mode
Through the serial port or on-board resistors to select: LVDS or TTL RGB888
Built-in EDID
Preferred resolution setting via serial port
Audio
With 3.5mm headphone output, analog stereo output can be output
Backlight control
Direct click screen when output is LVDS signal
Low power consumption design
DC 12V input | <1.5W power consumption
Limitations
HDCP not supported
How to Power
Power Input: Connect a DC 12V power supply to the dedicated DC IN jack
Power Consumption: < 1.5W (Board only, excluding display panel power).
Packing List
1 x Hdmi-compatible to RGB/LVDS Adapter Board
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.