Free Userbar - Userbars - User Bar - User Bars
 
Advanced search
Registered users

Username:

Password:

Log me on automatically next visit?

¬ Forgot password
¬ Registration

» Upload Userbar
» Animate Userbar
» Userbars Tutorial
» Userbar Tournaments
» Forum
» Chat Room
» FAQ
» Links

• PC Cheat Codes

>> If you dont know how to design a userbar, then write here a Userbar that you want. >> If you know how to design them help these people and design what they request.




USERBARS.org | Free Forum Userbars

On eBay now
eBay

NES Expansion Audio Module - Simple and Easy to Install

NES Expansion Audio Module - Simple and Easy to Install
$75.00

Buy Now

Easily add expansion audio capabilities to your Front Loader NES-001 by plugging this module into the expansion slot of your NES.

Get Expansion Audio from Flash Carts and Famicom Adapters without opening up and modding your console! Simply plug this into the expansion slot of your NES Front Loader and toggle the appropriate switches for your flash cart/adapter.

NOTE: Installing this into the expansion slot of your NES requires cutting the tabs of the expansion slot cover so that the slot can be exposed. See photos.

Installation instructions:

  • Pop the detachable expansion slot cover off from the bottom of your NES
  • Cut the tabs of plastic that are holding the permanent expansion slot cover so that this module can be plugged into the expansion slot
  • Plug the Expansion Audio Module into your NES expansion slot. Note that it only plugs into the slot in one orientation, with the side that has the switches and volume knob towards the back of the console.
  • Turn on the appropriate dip switches for your setup:
    • Toggle on switch 3 for most flash carts (Everdrive, PowerPak, Knockoff carts)
    • Toggle on switch 2 for properly designed/modded Famicom adapters
    • Toggle on switch 4 if 3 or 2 are not producing sound (some carts/adapters use this pin for audio instead)
    • Switch 1 is a 1K pulldown resistor which may or may not be needed to reduce noise when playing a game that does not use expansion audio. Try it both on and off to see what you prefer. (It will reduce the volume of expansion audio with it on, so you will have to adjust the volume as stated in the next steps.)
  • Start a game with expansion audio (Such as Akumajou Densetsu) and adjust the volume knob to your preference. This adjusts the volume of expansion audio only and will need to be set to where the expansion audio sounds balanced with the regular NES audio. The best position for this will depend on the cartridge (for example, the knockoff carts tend to be low volume and thus need this knob set to nearly maximum)
  • Pop the detachable expansion port cover back on and you\'re done!

NOTE: If you have already modded your console in some way (NESRGB, expansion audio mod, etc.) this module may or may not work as intended, depending on how the mod was installed.


Buy Now

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Related Userbars
       

More items on eBay

As an eBay Partner, userbars.org may earn a commission from qualifying purchases.



All userbars are property of respective authors.
Copyright © 2002 4homepages.de | Template © 2005 Bali Web Design