LAUNCH G700WCheck Engine Light On? Start With Answers.
Read engine fault codes, review live data and check emissions readiness—all from one handheld tool.
10-Mode OBD2 · 2.8" Color Screen · F1/F2/F3 Shortcuts
For compatible 12V OBD2 passenger vehicles. Engine and emissions diagnostics only.
Understand the Warning Before Your Next Repair Decision
A Check Engine Light does not tell you what happened. G700W retrieves supported fault codes and their definitions, giving you a useful starting point for troubleshooting or a conversation with your mechanic.
READ
Engine Fault CodesREVIEW
Live Sensor DataCHECK
Emissions Readiness
A fault code identifies a detected condition; further checks may be needed to find the cause. Clearing codes does not repair a fault.
Plug In. Power Up. Get Started.
No app installation, Bluetooth pairing or separate charging. The wired connection powers G700W directly from your vehicle's OBD2 port, while the color screen and physical buttons keep everyday checks straightforward.
More Context Than a Code AloneBuilt-In DTC LookupLook up supported code definitions directly on the scanner.Live Data GraphingObserve changing readings instead of relying only on a stored code.Freeze FrameReview the operating conditions saved when a fault was detected.Vehicle VoltageView voltage information through the OBD2 connection.10-Mode OBD2 Diagnostics
Access standard engine and emissions diagnostic information supported by your vehicle.
FunctionWhat You Can CheckRead CodesRetrieve supported stored and pending engine fault codes.Clear CodesErase supported codes after repairs; the light may return if the fault remains.Live DataView supported real-time engine sensor readings.Freeze FrameReview a snapshot of operating conditions recorded with a fault.I/M ReadinessCheck whether supported emissions monitors have completed their tests.O2 Sensor TestsAccess oxygen-sensor test information where available.On-Board Monitor TestsReview supported emissions-related monitor test results.EVAP / Mode 8Access the standard EVAP test where supported; this is not full offerirectional control.Vehicle InformationRead available VIN, calibration and related OBD2 information.
“10-mode” refers to the standard OBD2 diagnostic mode set. Menu functions group related modes; availability depends on the vehicle. Auto VIN is available only when the vehicle supplies the required information.
See How Your Engine Is Behaving
View supported readings such as engine speed, coolant temperature and fuel trim. Dual-parameter graphing helps you compare two data streams, while recording and playback let you revisit supported diagnostic data.
Look Back at the Moment a Fault Occurred
An intermittent problem may disappear before you inspect the car. Freeze Frame lets you review the supported operating conditions the vehicle saved when a fault was detected.
Keep an Eye on Vehicle Voltage
View voltage through the OBD2 connection and observe changes during starting and engine operation.
Voltage monitoring only: This function does not measure battery capacity, CCA or load performance, and cannot by itself confirm battery or alternator condition.F1 / F2 / F3: Fewer Menu Steps
Dedicated shortcut keys give you convenient access to DTC lookup, code clearing and I/M readiness checks.
确定 Check Compatibility Before Ordering
Designed for standard OBD2/EOBD engine and emissions diagnostics on compatible 12V passenger vehicles. For the U.S. market, coverage generally includes 1996 and newer OBD2-compliant cars and light trucks. Other markets have different implementation dates.
Examples of brands with compatible vehicles:
For Ford, Chevrolet, GMC, Buick, Cadillac, Chrysler, Dodge, Jeep, Volkswagen, Audi, BMW, Mercedes-Benz, Volvo, Toyota, Lexus, Honda, Acura, Nissan, Infiniti, Mazda, Hyundai, Kia, Subaru and Mitsubishi.
Brand names alone do not guarantee compatibility. Year, engine, market specification and standard OBD2 support all matter. A 16-pin socket alone does not confirm compatibility.
For Perodua and Proton: We generally recommend 2014 and newer models. Earlier vehicles may use non-standard protocols and may not connect.
Need help checking? Send your vehicle's year, make, model, engine and country of sale through messages before ordering.Choose G700W for Engine & Emissions Checks
A practical choice for everyday drivers and DIY owners who want Check Engine Light information, live data or emissions readiness checks without using a phone.
Not included: Dedicated ABS, SRS/airbag or transmission-module diagnostics; full-system scanning; oil, EPB, BMS or TPMS service resets; ECU coding; key programming; or general offerirectional active tests.
Not designed for pure battery-electric vehicles, 24V heavy-duty trucks or motorcycle diagnostics. A scan is not a substitute for a full mechanical inspection when buying a used car.
Your First Scan in Five Steps
- Park safely. Apply the parking brake and locate the OBD2 port, usually below the driver's dashboard.
- Connect the scanner. With the ignition off, insert the OBD2 connector firmly.
- Switch the ignition ON. Follow the vehicle and scanner instructions. Reading codes usually does not require starting the engine.
- Choose a function. Open the OBD2 menu to read codes, view data or check readiness.
- Save and review. Record useful results before clearing codes. Repair the underlying problem first.
Run the engine only in a well-ventilated location when a test requires it. Do not operate the scanner while driving.
Technical OverviewDisplay2.8-inch color screenConnectionWired, integrated 16-pin OBD2 cablePowerVehicle-powered through the OBD2 port; for compatible 12V vehiclesControlsPhysical navigation buttons with F1/F2/F3 shortcutsDiagnostic ScopeStandard OBD2 engine and emissions diagnosticsAdditional ToolsDTC lookup, data review, voltage monitoring and QR report accessPhone / AppNot required for standalone scanningWarranty2 years, subject to applicable warranty termsWhat's in the Box
1 × LAUNCH G700 main unit with integrated OBD2 cable
Included user instructions and printed documentation
Printed materials and packaging may vary by production batch. No separate charger is needed for vehicle-powered operation.
LAUNCH: Automotive Diagnostics Since 1992
LAUNCH develops automotive diagnostic tools for vehicle owners, technicians and repair professionals—from everyday OBD2 readers to advanced workshop diagnostic platforms.
Frequently Asked Questions1. Will it work with my car?
Your vehicle must support standard OBD2/EOBD engine diagnostics and use a compatible 12V system. Send your year, make, model, engine and market if you are unsure.
2. Does it scan every vehicle system?
No. It accesses standard OBD2 engine and emissions information, rather than performing a full-system scan.
3. Can it read ABS or airbag codes?
No. Dedicated ABS and SRS/airbag module diagnosis requires a higher-level scanner.
4. Can it diagnose transmission problems?
It does not access the dedicated transmission module. Some powertrain-related codes may appear through standard OBD2, depending on the vehicle.
5. Can it turn off the Check Engine Light?
It can clear supported codes after repairs. An unresolved fault may trigger the light again, and permanent codes cannot be manually erased in the same way.
6. Does clearing codes guarantee a smog-test pass?
No. Clearing codes can reset readiness monitors. The vehicle may need to complete its required drive cycle before inspection.
7. Do I need a phone or Bluetooth?
No phone, app or Bluetooth connection is needed for scanning on the device.
8. Does it need charging?
No. It receives power directly from the vehicle's OBD2 port.
9. Can I look up code definitions offline?
Yes, supported definitions are available in the built-in DTC library. A definition is a starting point, rather than proof that a specific part needs replacement.
10. Can it display and record live data?
Yes. It supports live data, dual-parameter graphing and recording/playback of supported information. Available readings depend on the vehicle.
11. What is Freeze Frame?
It is operating data saved by the vehicle when a qualifying fault occurs, helping you review the conditions around that event.
12. What does the voltage function measure?
It shows voltage through the OBD2 connection. It does not measure battery capacity, CCA or load-test performance.
13. Can it perform maintenance resets or ECU coding?
No. Oil, EPB, BMS, TPMS and other service resets, ECU coding and key programming are outside its scope.
14. Does it support all active tests?
No. A supported standard OBD2 EVAP test does not mean the tool offers general offerirectional control of vehicle components.
15. Will Auto VIN identify every car?
No. Automatic VIN retrieval depends on the information supplied by the vehicle. An unavailable VIN does not necessarily prevent other supported OBD2 functions from working.
16. Can I share a diagnostic report?
The on-screen QR report feature provides access to supported report information. Opening, sharing or printing the report may require an internet-connected phone or computer.
17. What if the scanner powers on but will not connect?
Check that the ignition is ON and the connector is secure, then confirm standard OBD2 compatibility. Contact us with the vehicle details and a photo of the message if the problem continues.
18. Will it work on electric cars, motorcycles or 24V trucks?
It is not designed for pure battery-electric vehicle diagnostics, motorcycles or 24V heavy-duty trucks.
19. How do I get software or language assistance?
Contact us through messages with the device information and your requested language or software question. We can help check the available instructions and options.
20. Why does the device say G700 when the listing says G700W?
G700W is the listing model name used here; the supplied device is marked G700. Both names refer to the same product in this listing.
2-Year Warranty & Customer Support
Includes a 2-year warranty for eligible product defects, subject to the applicable warranty terms. Contact us through messages for setup help, compatibility questions or warranty assistance.
For faster support, include your order number, vehicle details, device information and a clear photo or video of the issue. Shipping and returns follow the terms displayed in this listing.
Model & Product Identification
This listing uses the name LAUNCH G700W. The physical product and packaging may display LAUNCH G700. This naming difference does not indicate a different diagnostic specification for the product offered here.
If you need help checking product identification, send clear photos of the device label and packaging through messages. Keep your order details for after-sales support.
LAUNCH
LAUNCH TECH INTERNATIONAL CO., LIMITED
LAUNCH and related product marks belong to their respective owners. Vehicle manufacturer names are used solely to describe potential compatibility and do not imply affiliation or endorsement.
Images illustrate product features. Vehicle coverage, available data and diagnostic functions depend on the vehicle and its supported protocols. Brand-wide capabilities shown in company materials do not represent the capabilities of G700W alone.
On Nov 12, 2026 at 01:45:23 PST, seller added the following information:
On Nov 16, 2026 at 19:02:01 PST, seller added the following information:
On Nov 17, 2026 at 08:27:22 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.