LAUNCH G700S Check Engine Light On? Start With Answers.
10-Mode OBD2 · 2.8" Color Screen · F1/F2/F3 Shortcuts
For compatible 12V OBD2 passenger vehicles. Engine and emissions diagnostics only.
Understand the Warning Before Your Next Repair Decision
A Check Engine Light does not tell you what happened. G700S retrieves supported fault codes and their definitions, giving you a useful starting point for troubleshooting or a conversation with your mechanic.
READ
Engine Fault Codes REVIEW
Live Sensor Data CHECK
Emissions Readiness
A fault code identifies a detected condition; further checks may be needed to find the cause. Clearing codes does not repair a fault.
Plug In. Power Up. Get Started.
No app installation, Bluetooth pairing or separate charging. The wired connection powers G700S directly from your vehicle's OBD2 port, while the color screen and physical buttons keep everyday checks straightforward.
More Context Than a Code Alone Built-In DTC Lookup Look up supported code definitions directly on the scanner. Live Data Graphing Observe changing readings instead of relying only on a stored code. Freeze Frame Review the operating conditions saved when a fault was detected. Vehicle Voltage View voltage information through the OBD2 connection. 10-Mode OBD2 Diagnostics
Access standard engine and emissions diagnostic information supported by your vehicle.
Function What You Can Check Read Codes Retrieve supported stored and pending engine fault codes. Clear Codes Erase supported codes after repairs; the light may return if the fault remains. Live Data View supported real-time engine sensor readings. Freeze Frame Review a snapshot of operating conditions recorded with a fault. I/M Readiness Check whether supported emissions monitors have completed their tests. O2 Sensor Tests Access oxygen-sensor test information where available. On-Board Monitor Tests Review supported emissions-related monitor test results. EVAP / Mode 8 Access the standard EVAP test where supported; this is not full offerirectional control. Vehicle Information Read available VIN, calibration and related OBD2 information.
View supported readings such as engine speed, coolant temperature and fuel trim. Dual-parameter graphing helps you compare two data streams, while recording and playback let you revisit supported diagnostic data.
Look Back at the Moment a Fault Occurred
An intermittent problem may disappear before you inspect the car. Freeze Frame lets you review the supported operating conditions the vehicle saved when a fault was detected.
Keep an Eye on Vehicle Voltage
View voltage through the OBD2 connection and observe changes during starting and engine operation.
Voltage monitoring only: This function does not measure battery capacity, CCA or load performance, and cannot by itself confirm battery or alternator condition. F1 / F2 / F3: Fewer Menu Steps
Dedicated shortcut keys give you convenient access to DTC lookup, code clearing and I/M readiness checks.
Check Compatibility Before Ordering
Designed for standard OBD2/EOBD engine and emissions diagnostics on compatible 12V passenger vehicles. For the U.S. market, coverage generally includes 1996 and newer OBD2-compliant cars and light trucks. Other markets have different implementation dates.
Examples of brands with compatible vehicles:
For Ford, Chevrolet, GMC, Buick, Cadillac, Chrysler, Dodge, Jeep, Volkswagen, Audi, BMW, Mercedes-Benz, Volvo, Toyota, Lexus, Honda, Acura, Nissan, Infiniti, Mazda, Hyundai, Kia, Subaru and Mitsubishi.
Brand names alone do not guarantee compatibility. Year, engine, market specification and standard OBD2 support all matter. A 16-pin socket alone does not confirm compatibility.
For Perodua and Proton: We generally recommend 2014 and newer models. Earlier vehicles may use non-standard protocols and may not connect.
Need help checking? Send your vehicle's year, make, model, engine and country of sale through messages before ordering. Choose G700S for Engine & Emissions Checks
A practical choice for everyday drivers and DIY owners who want Check Engine Light information, live data or emissions readiness checks without using a phone.
Not included: Dedicated ABS, SRS/airbag or transmission-module diagnostics; full-system scanning; oil, EPB, BMS or TPMS service resets; ECU coding; key programming; or general offerirectional active tests.
Not designed for pure battery-electric vehicles, 24V heavy-duty trucks or motorcycle diagnostics. A scan is not a substitute for a full mechanical inspection when buying a used car.
Your First Scan in Five Steps
- Park safely. Apply the parking brake and locate the OBD2 port, usually below the driver's dashboard.
- Connect the scanner. With the ignition off, insert the OBD2 connector firmly.
- Switch the ignition ON. Follow the vehicle and scanner instructions. Reading codes usually does not require starting the engine.
- Choose a function. Open the OBD2 menu to read codes, view data or check readiness.
- Save and review. Record useful results before clearing codes. Repair the underlying problem first.
Run the engine only in a well-ventilated location when a test requires it. Do not operate the scanner while driving.
Technical Overview Display2.8-inch color screen ConnectionWired, integrated 16-pin OBD2 cable PowerVehicle-powered through the OBD2 port; for compatible 12V vehicles ControlsPhysical navigation buttons with F1/F2/F3 shortcuts Diagnostic ScopeStandard OBD2 engine and emissions diagnostics Additional ToolsDTC lookup, data review, voltage monitoring and QR report access Phone / AppNot required for standalone scanning Warranty2 years, subject to applicable warranty terms What's in the Box
1 × LAUNCH G700 main unit with integrated OBD2 cable
Included user instructions and printed documentation
LAUNCH: Automotive Diagnostics Since 1992
LAUNCH develops automotive diagnostic tools for vehicle owners, technicians and repair professionals—from everyday OBD2 readers to advanced workshop diagnostic platforms.
Frequently Asked Questions 1. Will it work with my car?
Your vehicle must support standard OBD2/EOBD engine diagnostics and use a compatible 12V system. Send your year, make, model, engine and market if you are unsure.
2. Does it scan every vehicle system?
No. It accesses standard OBD2 engine and emissions information, rather than performing a full-system scan.
3. Can it read ABS or airbag codes?
No. Dedicated ABS and SRS/airbag module diagnosis requires a higher-level scanner.
4. Can it diagnose transmission problems?
It does not access the dedicated transmission module. Some powertrain-related codes may appear through standard OBD2, depending on the vehicle.
5. Can it turn off the Check Engine Light?
It can clear supported codes after repairs. An unresolved fault may trigger the light again, and permanent codes cannot be manually erased in the same way.
6. Does clearing codes guarantee a smog-test pass?
No. Clearing codes can reset readiness monitors. The vehicle may need to complete its required drive cycle before inspection.
7. Do I need a phone or Bluetooth?
No phone, app or Bluetooth connection is needed for scanning on the device.
8. Does it need charging?
No. It receives power directly from the vehicle's OBD2 port.
9. Can I look up code definitions offline?
Yes, supported definitions are available in the built-in DTC library. A definition is a starting point, rather than proof that a specific part needs replacement.
10. Can it display and record live data?
Yes. It supports live data, dual-parameter graphing and recording/playback of supported information. Available readings depend on the vehicle.
11. What is Freeze Frame?
It is operating data saved by the vehicle when a qualifying fault occurs, helping you review the conditions around that event.
12. What does the voltage function measure?
It shows voltage through the OBD2 connection. It does not measure battery capacity, CCA or load-test performance.
13. Can it perform maintenance resets or ECU coding?
No. Oil, EPB, BMS, TPMS and other service resets, ECU coding and key programming are outside its scope.
14. Does it support all active tests?
No. A supported standard OBD2 EVAP test does not mean the tool offers general offerirectional control of vehicle components.
15. Will Auto VIN identify every car?
No. Automatic VIN retrieval depends on the information supplied by the vehicle. An unavailable VIN does not necessarily prevent other supported OBD2 functions from working.
16. Can I share a diagnostic report?
The on-screen QR report feature provides access to supported report information. Opening, sharing or printing the report may require an internet-connected phone or computer.
17. What if the scanner powers on but will not connect?
Check that the ignition is ON and the connector is secure, then confirm standard OBD2 compatibility. Contact us with the vehicle details and a photo of the message if the problem continues.
18. Will it work on electric cars, motorcycles or 24V trucks?
It is not designed for pure battery-electric vehicle diagnostics, motorcycles or 24V heavy-duty trucks.
19. How do I get software or language assistance?
Contact us through messages with the device information and your requested language or software question. We can help check the available instructions and options.
20. Why does the device say G700 when the listing says G700S?
G700S is the listing model name used here; the supplied device is marked G700. Both names refer to the same product in this listing.
2-Year Warranty & Customer Support
Includes a 2-year warranty for eligible product defects, subject to the applicable warranty terms. Contact us through messages for setup help, compatibility questions or warranty assistance.
Model & Product Identification
This listing uses the name LAUNCH G700S. The physical product and packaging may display LAUNCH G700. This naming difference does not indicate a different diagnostic specification for the product offered here.
LAUNCH
LAUNCH TECH INTERNATIONAL CO., LIMITED
LAUNCH and related product marks belong to their respective owners. Vehicle manufacturer names are used solely to describe potential compatibility and do not imply affiliation or endorsement.
Images illustrate product features. Vehicle coverage, available data and diagnostic functions depend on the vehicle and its supported protocols. Brand-wide capabilities shown in company materials do not represent the capabilities of G700S alone.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.