13398-DO Dual Synchronous Velocity Slide Controller, Replacement for Various in-Wall Slide-Outs Controller V-Sync II, Replaced 13398-C2 Version, Match 211852 Component
Product Description
One green and one red, used to indicate the current controller status and faults.
Note:
Please confirm whether the model is suitable before buying.
FAULT INDICATION:
GREEN LED:
1BLINK =MOTOR 1
2 BLINKS = MOTOR 2
RED LED:
2 BLINKS=Battery dropout=Battery capacity low enough to drop below 6 volts while running or short in switch wiring.
3 BLINKS=Low battery=Voltage below 8 volts at start of cycle.
4 BLINKS=High battery=Voltage greater than 18 volts.
5 BLINKS=Excessive motor current=High amperage, also indicated by1 side of slide continually stalling.
6 BLINKS=Motor short circuit=Motor or wiring to motor has shorted out.
8 BLINKS=Wire short between controller and motor=Encoder is not providing a signal .This is usually a wiring problem.
9 BLINKS=Hall power short To ground=Power to encoder has been shorted to ground.This is usually a wiring problem.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
For Lippert 13398-D0 Dual Motor Synchronous Velocity Slide Controller V-Sync II$29.46
In-Wall Slide-Out Controller Dual Motor Synchronous for Lippert RV 13398-C2 Ref$32.99
Genuine OEM Lippert 13398-D0 RV Dual Motor Slide Controller V-Sync II 13398-C2$99.00
For Lippert 13398-D0 Dual Motor Synchronous Velocity Slide Controller V-Sync II$52.99
For Lippert 13398-D0 Dual Motor Synchronous Velocity Slide Controller V-Sync II$53.49
In-Wall Slide-Out Controller Dual Motor Synchronous for Lippert RV 13398-C2 Ref$39.19
In-Wall Slide-Out Controller Dual Motor Synchronous for Lippert RV 13398-C2 Ref$44.09
For Lippert 13398-D0 Dual Motor Synchronous Velocity Slide Controller$25.00
www.userbars.org
