Fail Safe Suit For RC Nitro Car Accelerator Black

Note: The color of the item may vary slightly due to photography and your own computer Features: 1.Low Power warning. Prevents accidents by detection low Power voltage, low radio Power voltage, no radio signal, and signal interference. 2.Stops vehicle by applying brake servo. Fail-Safe Break Setup 1. Connect the fail-safe unit to throttle/brake servo and receiver. Be sure to observe the polarity of the wire leads. 2. Connect to transmitter power turn on transmitter, and now you??ll see FS yellow LED lighting, it indicates that the signal is input, servo which connect to FS will receive the signal while operating Transmitter.Working voltage: 4.8V-6V
Load current: 7mA (4.8V)
Accuracy range:<0.3% 5
Size: 37mm × 21mm × 9mm
Function: Suitable for various remote control model cars·
Usage: Installed on the throttle servo

Features:
1. The low voltage runaway protector is connected to the servo machine of the receiver. At this moment, a green light is displayed and everything is running normally.
2. It can control slight radio interference, and when the interference is strengthened, the red light will turn on and be locked. Like a light turning from red to green, it stops and can be controlled.
When the voltage of the receiver drops to a certain level, the low voltage runaway protector will immediately be locked and the red light will turn on·

Function: To prevent vehicle collisions caused by loss of control. Emergency situations such as remote control power failure, exceeding the remote control range, etc. The loss of control protector plays a protective role, mainly when your remote control is malfunctioning or severely interfered with The remote control loses power and disconnects the signal from the model car. The loss of control protector will automatically lock one direction (i.e. brake), greatly reducing the player\'s losses

On Nov 6, 2025 at 20:58:28 PST, seller added the following information: