Features:
1.Low Power warning.
Prevents accidents by detection low Power voltage, low radio Power voltage, no radio signal, and signal interference.
2.Stops vehicle by applying brake servo.
Fail-Safe Break Setup
1. Connect the fail-safe unit to throttle/brake servo and receiver. Be sure to observe the polarity of the wire leads.
2. Connect to transmitter power turn on transmitter, and now you??ll see FS yellow LED lighting, it indicates that the signal is input, servo which connect to FS will receive the signal while operating Transmitter.
3. Push the throttler make servo move to idea position, pushing FS Input signal botton, release while red LED sparking 3 times, then it indicates FS has recorded the signal.
4. Turn off transmitter power, and now you??ll see FS yellow LED went out, while red LED is sparking, Servo is moving to the position which set before.
5. Re-urn on transmitter power, FS yellow LED is lighting, servo will move as transmitter moving. All set up is done, you can operate transmitter freely.
Working volts: 4.8V-6V
Loading current: 7mA(4.8V)
Precision scope: <0.3%
Dimension: approx. 37mm x 20mm x 9mm
Package Include:
3x Fail Safe Suit For RC Nitro Car Accelerator
On Jul 28, 2025 at 20:17:39 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.