Product introduction:High quality replacement parts.Operating Voltage: 12 or 24 volts ±20%Steady State Speed Band: ±0.25%Ambient Operating Temperature: -40℃ to +85℃Temperature Stability: Better than ±0.5% over temperatures of -40℃ to +125℃Mechanical Vibration: Withstands the following vibration without failure or degraded performance:0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal stripEnclosure: Die cast aluminumWeight: 635 grams (1.4 lbs.) Magnetic Pickup Frequency Range: 2500 - 5000 HzOutput Signal: PWM current to 6A at max.Actuator Compatibility: EFC3408326, DYNA7000 EFC3062322 Generator Speed Controller Control Unit 12/24V easy installation
Product introduction:
High quality replacement parts.
Operating Voltage: 12 or 24 volts ±20%
Steady State Speed Band: ±0.25%
Ambient Operating Temperature: -40℃ to +85℃
Temperature Stability: Better than ±0.5% over temperatures of -40℃ to +125℃
Mechanical Vibration: Withstands the following vibration without failure or degraded performance:
0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal strip
Enclosure: Die cast aluminum
Weight: 635 grams (1.4 lbs.) Magnetic Pickup Frequency Range: 2500 - 5000 Hz
Output Signal: PWM current to 6A at max.
Actuator Compatibility: EFC3408326, DYNA7000
Model: 3062322
Type: Speed Controller
Fitment Type: Direct Replacement
Speed range: 1kHz ~ 6.5kHz
Heat stability: Maximum ± 0.7%
IDLE adjustment: 260 ± 20Hz ~ 85% of the rated speed
DROOP adjustment: The minimum position is 15Hz ± 6Hz / per Ampert load current change
Maximum position 400Hz ± 75Hz / Mutations of load current per Ampert
External speed adjustment: ± 200Hz (1kΩ external)
AUX input sensitivity: 148Hz / 1V., ± 10Hz.,
Improved: 1MΩ
Environment:
Work temperature range: -40 ℃ ~ 85 ℃
Work humidity range: Maximum 95%
Save temperature: -55 ℃ ~ 92 ℃
Vibration: 20-100Hz 500mm/SEC.
Enter power supply:
Power voltage: 12V Or 24V DC battery system
Ground polarity: Negative electrode
Power consumption: 40mA
Continuous current of the actuator: minimum 1A; maximum 4.5A (3062322 maximum current can reach 8A)
Speed sensor signal: 2 ~ 120V RMS
Note: The above performance parameters are measured when the operating frequency is 3800Hz
Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit Compatible for Engine KTA50 KTA38 KTA19
EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
It is a design of a full electronic closed loop control.
It uses a rapid response to the speed of the instant load to control the speed of the engine.
When the matching EFCelectronic actuator and magnetic speed sensor signal are connected to the matching Then, then
In terms of design, it is easy to install and can be pre -adjusted, including the adjustment rate and work idle.
In order to assist the input of multiple machines or special use machines, and prevent the voltage of the inverse battery, the short -circuit failure of the actuator, the short -circuit failure of the actuator and the actuator and the actuator and the short -circuit failure and the actuator and the actuator.
Safety protection in the case of losing the speed sensor signal or power supply.
Product adaptation model:
General Purpose
Package:
1 PC Generator Speed Controller
Precautions:
Incorrect installation of the product may cause it not to work properly.
Please contact us in time if you have any questions.
We will sincerely solve your problem.
EFC3062322 Generator Speed Controller Control Unit 12/24V easy installation
Product introduction:
High quality replacement parts.
Operating Voltage: 12 or 24 volts ±20%
Steady State Speed Band: ±0.25%
Ambient Operating Temperature: -40℃ to +85℃
Temperature Stability: Better than ±0.5% over temperatures of -40℃ to +125℃
Mechanical Vibration: Withstands the following vibration without failure or degraded performance:
0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal strip
Enclosure: Die cast aluminum
Weight: 635 grams (1.4 lbs.) Magnetic Pickup Frequency Range: 2500 - 5000 Hz
Output Signal: PWM current to 6A at max.
Actuator Compatibility: EFC3408326, DYNA7000
Model: 3062322
Type: Speed Controller
Fitment Type: Direct Replacement
Speed range: 1kHz ~ 6.5kHz
Heat stability: Maximum ± 0.7%
IDLE adjustment: 260 ± 20Hz ~ 85% of the rated speed
DROOP adjustment: The minimum position is 15Hz ± 6Hz / per Ampert load current change
Maximum position 400Hz ± 75Hz / Mutations of load current per Ampert
External speed adjustment: ± 200Hz (1kΩ external)
AUX input sensitivity: 148Hz / 1V., ± 10Hz.,
Improved: 1MΩ
Environment:
Work temperature range: -40 ℃ ~ 85 ℃
Work humidity range: Maximum 95%
Save temperature: -55 ℃ ~ 92 ℃
Vibration: 20-100Hz 500mm/SEC.
Enter power supply:
Power voltage: 12V Or 24V DC battery system
Ground polarity: Negative electrode
Power consumption: 40mA
Continuous current of the actuator: minimum 1A; maximum 4.5A (3062322 maximum current can reach 8A)
Speed sensor signal: 2 ~ 120V RMS
Note: The above performance parameters are measured when the operating frequency is 3800Hz
Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit Compatible for Engine KTA50 KTA38 KTA19
EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
It is a design of a full electronic closed loop control.
It uses a rapid response to the speed of the instant load to control the speed of the engine.
When the matching EFCelectronic actuator and magnetic speed sensor signal are connected to the matching Then, then
In terms of design, it is easy to install and can be pre -adjusted, including the adjustment rate and work idle.
In order to assist the input of multiple machines or special use machines, and prevent the voltage of the inverse battery, the short -circuit failure of the actuator, the short -circuit failure of the actuator and the actuator and the actuator and the short -circuit failure and the actuator and the actuator.
Safety protection in the case of losing the speed sensor signal or power supply.
Product adaptation model:
General Purpose
Package:
1 PC Generator Speed Controller
Precautions:
Incorrect installation of the product may cause it not to work properly.
Please contact us in time if you have any questions.
We will sincerely solve your problem.
Item SpecificsCountry of Origin United StatesBrand utility-toolsModel UT6074208MPN 1804656Type Speed ControllerWarranty 1 YearOperating Voltage 12 or 24 volts ±20%Steady State Speed Band ±0.25%Ambient Operating Temperature -40℃ to 85℃Custom Bundle NoBundle Description NoModified Item NoTemperature Stability Better than ±0.5% over temperatures of -40℃ to 125℃Enclosure Die cast aluminumWeight 635 grams (1.4 lbs.)Magnetic Pickup Frequency Range 2500 - 5000 HzOutput Signal PWM current to 6A at max.Actuator Compatibility EFC3408326, DYNA7000Fitment Type Direct Replacement
Payment
All payments are handled securely through Managed Payments.
Shipping
We process and dispatch your purchase within 3 business day after payment clearance.
Please submit your inquiry via platform message if you have special requirements (combination of packaging etc.).
We offer free USPS or FEDEX Package as default.
If you choose express post, we charge a flat rate and we Express Post, which can be delivered in 1-3 business days, depending on your location.If you require another company, please submit your inquiry via platform message.
Returns
Please submit your inquiry via platform message first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
Buyer is responsible for the return cost.
Change-of-mind return can only be accepted within 7 days after purchase.
All other returns can be accepted in 30 days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative response, please submit your inquiry via platform message first.
We will do everything we can to give you a satisfying solution.
Please don't open case via or PayPal.
We do our best to resolve any issue. Leaving negative response and low ratings doesn't get things solved.
EFC3062322 Generator Speed Controller Control Unit 12/24V easy installation
Product introduction:
High quality replacement parts.
Operating Voltage: 12 or 24 volts ±20%
Steady State Speed Band: ±0.25%
Ambient Operating Temperature: -40℃ to +85℃
Temperature Stability: Better than ±0.5% over temperatures of -40℃ to +125℃
Mechanical Vibration: Withstands the following vibration without failure or degraded performance:
0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal strip
Enclosure: Die cast aluminum
Weight: 635 grams (1.4 lbs.) Magnetic Pickup Frequency Range: 2500 - 5000 Hz
Output Signal: PWM current to 6A at max.
Actuator Compatibility: EFC3408326, DYNA7000
Model: 3062322
Type: Speed Controller
Fitment Type: Direct Replacement
Speed range: 1kHz ~ 6.5kHz
Heat stability: Maximum ± 0.7%
IDLE adjustment: 260 ± 20Hz ~ 85% of the rated speed
DROOP adjustment: The minimum position is 15Hz ± 6Hz / per Ampert load current change
Maximum position 400Hz ± 75Hz / Mutations of load current per Ampert
External speed adjustment: ± 200Hz (1kΩ external)
AUX input sensitivity: 148Hz / 1V., ± 10Hz.,
Improved: 1MΩ
Environment:
Work temperature range: -40 ℃ ~ 85 ℃
Work humidity range: Maximum 95%
Save temperature: -55 ℃ ~ 92 ℃
Vibration: 20-100Hz 500mm/SEC.
Enter power supply:
Power voltage: 12V Or 24V DC battery system
Ground polarity: Negative electrode
Power consumption: 40mA
Continuous current of the actuator: minimum 1A; maximum 4.5A (3062322 maximum current can reach 8A)
Speed sensor signal: 2 ~ 120V RMS
Note: The above performance parameters are measured when the operating frequency is 3800Hz
Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit Compatible for Engine KTA50 KTA38 KTA19
EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
It is a design of a full electronic closed loop control.
It uses a rapid response to the speed of the instant load to control the speed of the engine.
When the matching EFCelectronic actuator and magnetic speed sensor signal are connected to the matching Then, then
In terms of design, it is easy to install and can be pre -adjusted, including the adjustment rate and work idle.
In order to assist the input of multiple machines or special use machines, and prevent the voltage of the inverse battery, the short -circuit failure of the actuator, the short -circuit failure of the actuator and the actuator and the actuator and the short -circuit failure and the actuator and the actuator.
Safety protection in the case of losing the speed sensor signal or power supply.
Product adaptation model:
General Purpose
Package:
1 PC Generator Speed Controller
Precautions:
Incorrect installation of the product may cause it not to work properly.
Please contact us in time if you have any questions.
We will sincerely solve your problem.
Item SpecificsCountry of Origin :United StatesBrand :utility-toolsModel :UT6074208MPN :1804656Type :Speed ControllerWarranty :1 YearOperating Voltage :12 or 24 volts ±20%Steady State Speed Band :±0.25%Ambient Operating Temperature :-40℃ to 85℃Custom Bundle :NoBundle Description :NoModified Item :NoTemperature Stability :Better than ±0.5% over temperatures of -40℃ to 125℃Enclosure :Die cast aluminumWeight :635 grams (1.4 lbs.)Magnetic Pickup Frequency Range :2500 - 5000 HzOutput Signal :PWM current to 6A at max.Actuator Compatibility :EFC3408326, DYNA7000Fitment Type :Direct Replacement
Payment
All payments are handled securely through Managed Payments.
Shipping
We process and dispatch your purchase within 3 business day after payment clearance.
Please submit your inquiry via platform message if you have special requirements (combination of packaging etc.).
We offer free USPS or FEDEX Package as default.
If you choose express post, we charge a flat rate and we Express Post, which can be delivered in 1-3 business days, depending on your location.If you require another company, please submit your inquiry via platform message.
Returns
Please submit your inquiry via platform message first when return, exchange and refund is required.
Any direct return of purchased items will not be processed.
Buyer is responsible for the return cost.
Change-of-mind return can only be accepted within 7 days after purchase.
All other returns can be accepted in 30 days.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative response, please submit your inquiry via platform message first.
We will do everything we can to give you a satisfying solution.
Please don't open case via or PayPal.
We do our best to resolve any issue. Leaving negative response and low ratings doesn't get things solved.
Shop CategoryStore Home Lawn Mower Parts◈Lawn Mower Carburetors◈Repair Kits◈Lubrication System◈Fuel Pump◈Recoil Starter◈Ignition Coil◈Transmission System◈Air Excavator Parts◈Cylinder◈Hydraulic pump◈Control lever◈Fuel pump◈Repair Kits◈Cylinder head◈Muffler◈Others Chainsaw Parts◈Chainsaw Carburetors◈Repair Kits◈Clutch & Accessories◈Cylinder◈Others String Trimmer Parts◈String Trimmer Carburetors◈Repair Kits◈Trimmer Head◈Others Planting & Breeding Equipment◈Hardware Cloth & Mesh◈Beekeeping tools◈others Yard, Garden & Outdoor Living◈Pool Equipment & Parts◈Ropes, Cords & Slings◈Weed & Pest Control◈Plant Baskets, Pots & Boxes◈Watering Equipment◈Outdoor Sports◈Protective Netting & Mesh◈Garden Seats◈Folding & Step Ladders◈Landscape & Walkway Lights◈Other outdoor living◈others Leafblower Parts◈Leafblower Carburetors◈Others Snowblower Parts◈Snowblower Carburetors◈Others Truck Parts Tractor Parts Agricultural Machinery Parts CNC◈Spring Collet◈Boring Bar◈Collet Chuck◈Bearing & Bushing Parts◈Quick Change Tool Post◈Drill Chuck◈Drill Chuck Arbors◈Live Center◈Vise◈Milling End Mills◈Pull Stud◈Other Hand Tools◈Rivet Gun◈Wrenches◈Hydraulic Crimper◈Winches◈Drill Bits◈Measuring Equipment◈Other Metalworking supplles◈Sanding Disc◈Metal Cut Off Wheels◈Flap Discs◈Hose Clamp◈Welding Wire◈Cable◈Piston Driver◈Other Generator Accessorles◈Automatic Voltage Regulator◈Generator Carburetor◈Other Industrlal Control Module◈Control Valves◈Roller Chain◈Pump◈Electric Motors◈Other Decorate◈Interior door fittings◈Decoration materials◈Paint Sprayers◈Conduit Corrugated OtherHot Item 3 Pack String Trimmer Head Fit For Speed Feed 400 Echo SRM-225 SRM-230 USD 15.53 100ft 304 Stainless Steel Garden Hose Metal Heavy Duty Water Hoses Yard USD 29.67 100 × 6\" Sanding Disc NO-Hole Hook & Loop Sanding Discs Grit 60-320 Sand Paper USD 19.21 5 Pack Metal Plant Stand Heavy Duty Flower Pot Stands For Indoor Outdoor Plants USD 21.89 Carburetor for B & S 498254 497347 497314 498170 799868 5.5hp 6.5hp 6.75hp USD 8.86 New List Item 8-32 Aluminum Flange Nutserts Rivet Nut Rivnut Nutsert Durable 100Pack Rivet Nut USD 13.53 245 Pack M6/M8/M10 8.8 Grade alloy steel Bolts and Nuts Kits For Door handle USD 22.56 Hinged Electrical Enclosure 12 × 8 × 6 \" IP65 Protection Level Carbon Steel USD 40.59 Wood Screw Kit 550 Pcs #4 #6 #8 #10 #12 Raised-Head Stainless Steel Self-Tapping USD 18.83 100Pack Rivet Nut Tool Kit 14 Inch Nutsert Tool W/7pcs Interchangeable Mandrel USD 37.63 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us
On Nov 17, 2026 at 01:36:55 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.