Feature:Operating Voltage: 12 or 24 volts ±20%Steady State Speed Band: ±0.25%Ambient Operating Temperature: -40℃ to +85℃Temperature Stability: Better than ±0.5% over temperatures of -40℃ to +125℃Mechanical Vibration: Withstands the following vibration without failure or degraded performance:0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal stripEnclosure: Die cast aluminumWeight: 635 grams (1.4 lbs.) Magnetic Pickup Frequency Range: 2500 - 5000 HzOutput Signal: PWM current to 6A at max.Actuator Compatibility: EFC3408326, DYNA7000Model: 3062322Type: Speed ControllerFitment Type: Direct Replacement Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit
Feature:
Operating Voltage: 12 or 24 volts ±20%
Steady State Speed Band: ±0.25%
Ambient Operating Temperature: -40℃ to +85℃
Temperature Stability: Better than ±0.5% over temperatures of -40℃ to +125℃
Mechanical Vibration: Withstands the following vibration without failure or degraded performance:
0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal strip
Enclosure: Die cast aluminum
Weight: 635 grams (1.4 lbs.) Magnetic Pickup Frequency Range: 2500 - 5000 Hz
Output Signal: PWM current to 6A at max.
Actuator Compatibility: EFC3408326, DYNA7000
Model: 3062322
Type: Speed Controller
Fitment Type: Direct Replacement
Speed range: 1kHz ~ 6.5kHz
Heat stability: Maximum ± 0.7%
IDLE adjustment: 260 ± 20Hz ~ 85% of the rated speed
DROOP adjustment: The minimum position is 15Hz ± 6Hz / per Ampert load current change
Maximum position 400Hz ± 75Hz / Mutations of load current per Ampert
External speed adjustment: ± 200Hz (1kΩ external)
AUX input sensitivity: 148Hz / 1V., ± 10Hz.,
Improved: 1MΩ
Environment:
Work temperature range: -40 ℃ ~ 85 ℃
Work humidity range: Maximum 95%
Save temperature: -55 ℃ ~ 92 ℃
Vibration: 20-100Hz 500mm/SEC.
Enter power supply:
Power voltage: 12V Or 24V DC battery system
Ground polarity: Negative electrode
Power consumption: 40mA
Continuous current of the actuator: minimum 1A; maximum 4.5A (3062322 maximum current can reach 8A)
Speed sensor signal: 2 ~ 120V RMS
Note: The above performance parameters are measured when the operating frequency is 3800Hz
Please check pictures for more Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit Compatible for Engine KTA50 KTA38 KTA19
EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
It is a design of a full electronic closed loop control.
It uses a rapid response to the speed of the instant load to control the speed of the engine.
When the matching EFCelectronic actuator and magnetic speed sensor signal are connected to the matching Then, then
In terms of design, it is easy to install and can be pre -adjusted, including the adjustment rate and work idle.
In order to assist the input of multiple machines or special use machines, and prevent the voltage of the inverse battery, the short -circuit failure of the actuator, the short -circuit failure of the actuator and the actuator and the actuator and the short -circuit failure and the actuator and the actuator.
Safety protection in the case of losing the speed sensor signal or power supply.
Package Content:
1 PC Generator Speed Controller
Notes:
Due To The Different Display And Different Light, The Picture May Not -Reflect The Actual Color Of The Item.Thanks For Your Understanding.
If you are uncertain about the item,please feel free to contact us for
Payment
All payments are handled securely through Managed Payments.
Shipping
We process and dispatch your purchase within 1 business day after payment clearance.
For weekend orders, we will deliver the goods on Monday
Returns
All return, exchange or refund requests **must be submitted via platform message only**.
Any direct return of purchased items will not be processed.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative response, please submit your inquiry via platform message.
We will do everything we can to give you a satisfying solution.
Please don't open case via or paypal.
We do our best to resolve any issue. Leaving negative responses and low ratings doesn't get things solved.
So please don't be upset and we will not let you down.
FAQ
How much does delivery cost and how long will it take?
You can check the delivery cost in the listing “Shipping and payments” section by selecting your country and entering your zip code. If it is not specified, please provide us your shipping address and zip code via message.
What payment methods do you accept?
We currently only accept payment via PayPal.
When will my order be dispatched?
We will arrange the shipment in 1 business day after the payment is cleared. The tracking number will be updated on in 24 hours after the shipment. Please notice that there is no shipment during weekend and holidays.
What do I do if I have not received my order?
Please simply contact us via messages, and then, we will get back to you as soon as possible with the update. Usually, we will follow up every shipment till customers get their order.
What do I do if my product is faulty?
Please simply contact us via messages, and then, we will get back to you as soon as possible. It will speed up the process if you could provide us some pictures or video to illustrate the issue details.
Visit my Store to see new items.
CNCMetalworking SuppliesHand ToolsIndustrial Control ModuleDecorate Engine Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit
Feature:
Operating Voltage: 12 or 24 volts ±20%
Steady State Speed Band: ±0.25%
Ambient Operating Temperature: -40℃ to +85℃
Temperature Stability: Better than ±0.5% over temperatures of -40℃ to +125℃
Mechanical Vibration: Withstands the following vibration without failure or degraded performance:
0.06 inch double amplitude at 5 to 18 Hz; 1 G at 18 to 30 Hz Connections: Terminal strip
Enclosure: Die cast aluminum
Weight: 635 grams (1.4 lbs.) Magnetic Pickup Frequency Range: 2500 - 5000 Hz
Output Signal: PWM current to 6A at max.
Actuator Compatibility: EFC3408326, DYNA7000
Model: 3062322
Type: Speed Controller
Fitment Type: Direct Replacement
Speed range: 1kHz ~ 6.5kHz
Heat stability: Maximum ± 0.7%
IDLE adjustment: 260 ± 20Hz ~ 85% of the rated speed
DROOP adjustment: The minimum position is 15Hz ± 6Hz / per Ampert load current change
Maximum position 400Hz ± 75Hz / Mutations of load current per Ampert
External speed adjustment: ± 200Hz (1kΩ external)
AUX input sensitivity: 148Hz / 1V., ± 10Hz.,
Improved: 1MΩ
Environment:
Work temperature range: -40 ℃ ~ 85 ℃
Work humidity range: Maximum 95%
Save temperature: -55 ℃ ~ 92 ℃
Vibration: 20-100Hz 500mm/SEC.
Enter power supply:
Power voltage: 12V Or 24V DC battery system
Ground polarity: Negative electrode
Power consumption: 40mA
Continuous current of the actuator: minimum 1A; maximum 4.5A (3062322 maximum current can reach 8A)
Speed sensor signal: 2 ~ 120V RMS
Note: The above performance parameters are measured when the operating frequency is 3800Hz
Please check pictures for more Governor Speed Controller 3062322 EFC3062322 Generator Speed Control Unit Compatible for Engine KTA50 KTA38 KTA19
EFC3062322 is a engine speed controller designed by all electronic device for actuator, It can respond to transient load changes fast and accurately. It has a wide speed control range. For this controller, separate circuits allow adjustments of proportional, integral and derivative values, these parameters work together to control and help engine respond to load changes fast and stably while maintain precise speed regulation of diesel.
It is a design of a full electronic closed loop control.
It uses a rapid response to the speed of the instant load to control the speed of the engine.
When the matching EFCelectronic actuator and magnetic speed sensor signal are connected to the matching Then, then
In terms of design, it is easy to install and can be pre -adjusted, including the adjustment rate and work idle.
In order to assist the input of multiple machines or special use machines, and prevent the voltage of the inverse battery, the short -circuit failure of the actuator, the short -circuit failure of the actuator and the actuator and the actuator and the short -circuit failure and the actuator and the actuator.
Safety protection in the case of losing the speed sensor signal or power supply.
Package Content:
1 PC Generator Speed Controller
Notes:
Due To The Different Display And Different Light, The Picture May Not -Reflect The Actual Color Of The Item.Thanks For Your Understanding.
If you are uncertain about the item,please feel free to contact us for
PaymentShippingReturnsContact UsFAQ
All payments are handled securely through Managed Payments.
We process and dispatch your purchase within 1 business day after payment clearance.
For weekend orders, we will deliver the goods on Monday
All return, exchange or refund requests **must be submitted via platform message only**.
Any direct return of purchased items will not be processed.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Before leaving us neutral or negative response, please submit your inquiry via platform message.
We will do everything we can to give you a satisfying solution.
Please don't open case via or paypal.
We do our best to resolve any issue. Leaving negative responses and low ratings doesn't get things solved.
So please don't be upset and we will not let you down.
How much does delivery cost and how long will it take?
You can check the delivery cost in the listing “Shipping and payments” section by selecting your country and entering your zip code. If it is not specified, please provide us your shipping address and zip code via message.
What payment methods do you accept?
We currently only accept payment via PayPal.
When will my order be dispatched?
We will arrange the shipment in 1 business day after the payment is cleared. The tracking number will be updated on in 24 hours after the shipment. Please notice that there is no shipment during weekend and holidays.
What do I do if I have not received my order?
Please simply contact us via messages, and then, we will get back to you as soon as possible with the update. Usually, we will follow up every shipment till customers get their order.
What do I do if my product is faulty?
Please simply contact us via messages, and then, we will get back to you as soon as possible. It will speed up the process if you could provide us some pictures or video to illustrate the issue details.
All rights reserved.
On Nov 9, 2026 at 03:54:03 PST, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.