Feature:Type: Genset ControllerSpeed input: Freq 300Hz~10kHzHole size: 67 × 67mm/2.6 × 2.6"Power consumption: MAX. 2WModel: DC10KPower supply input: 8-33VDCPower generation input: 15-300VAC, 50/60HzDimensions: 78 × 78 × 72mm/3.1 × 3.1 × 2.8"Oil valve output: MAX. 16AMotor output: MAX. 10AExcitation output: MAX. 80mAAlarm output: MAX. 16AWorking temperature: -30 to 75℃/-86℉ to 167℉Storage temperature: -40 to 85℃/-104℉ to 185℉Product weight: 280g/0.6LBPlease check pictures for more details. DC10K Genset Controller Generator Controller Engine Manual Start Controller New
Feature:
Type: Genset Controller
Speed input: Freq 300Hz~10kHz
Hole size: 67 × 67mm/2.6 × 2.6"
Power consumption: MAX. 2W
Model: DC10K
Power supply input: 8-33VDC
Power generation input: 15-300VAC, 50/60Hz
Dimensions: 78 × 78 × 72mm/3.1 × 3.1 × 2.8"
Oil valve output: MAX. 16A
Motor output: MAX. 10A
Excitation output: MAX. 80mA
Alarm output: MAX. 16A
Working temperature: -30 to 75℃/-86℉ to 167℉
Storage temperature: -40 to 85℃/-104℉ to 185℉
Product weight: 280g/0.6LB
Please check pictures for more details.
Description:
Controller DC10K is designed as one of the engine manual start controller.
The Hz, Volt, Battery voltage and accumulation time can be displayed through the front face LED screen. This controller is also with various kinds of stop and alarm indications to monitor the genset status. Besides, it can also connect with PC so that parameters can be set through Computer to equip for more different gensets.
Operation:
1. Power On: Switch “0” to “I” till the tube is lighted, In the procession of cranking, over speed indicator will be lighted if the crank is not successful after 45sec. (controller will cut off fuel solenoid’s output and come into protection)
2. Start Running: Switch “I” to “II” till engine started. Once power on the engine, it will be cranked. the controller will come into running status after 8 sec if cranking successfully. Then the controller will monitor the relative parameters and set protection. (the controller will cut off fuel solenoid output and display the alarm status if the genset is stopped.) Please Switch from “I” to “0”.
3. Stop and Reset: Switch from “I” to “0” and take off the power.
Comparison of DC10G & DC10K:
Similar functions, but with different wiring.
Please connect the module to PC by communication cables and powered on.
1. Alarm Setting:
* Over speed alarm: 1710RPM (Rated 50Hz), 2040RPM (Rated 60Hz), range: 0-4000RPM, when the RPM is over this value and keep more than 1sec, then the controller will alarm and stop.
* Over frequency alarm: 57Hz (Rated 50Hz), 68Hz (Rated 60Hz), range: 40-80Hz, when the frequency is over this value and keep more than 1 sec, then the controller will alarm and stop.
* Low frequency alarm: 20Hz, range: 20-60Hz, when the frequency is lower than the value and keep more than 5sec, the controller will alarm and stop.
* Over voltage alarm: 265V, range: 50-500v, 500V is set as forofferden. When the voltage is over this value and keep more than 5sec, then the controller will alarm and stop.
* Charging failure D- value: 6V, range: 1-24V, when the different value between charging D+ and Battery B+ is over this value and keep more than 5sec, then the controller will alarm.
2. Display Setting:
* Four Screen self-cycling display: the parameters shall be switched timely according to the interval time setting after choosing this option.
* Homepage option: one parameter can be displayed as homepage display after choosing this function. The page will be switched automatically after pressing page change button for a while.
* Revert-back delay: the time to revert back to homepage.
* Self-cycling display time: the interval time setting.
Package Content:
1 × DC10K Genset Controller Generator Controller Engine Manual
Notes:
Due To The Different Display And Different Light, The Picture May Not -Reflect The Actual Color Of The Item.Thanks For Your Understanding.
If you are uncertain about the item,please feel free to contact us for confirm.
Payment
We accept Paypal ,Google pay, Visa,Master Card, American Express, Discover. Mastercard etc.
Shipping
We process and dispatch your purchase within 1 business day after payment clearance.
For weekend orders, we will deliver the goods on Monday
Returns
All return, exchange or refund requests **must be submitted via platform message only**.
Any direct return of purchased items will not be processed.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative response, please submit your inquiry via platform message.
We will do everything we can to give you a satisfying solution.
Please don't open case via or paypal.
We do our best to resolve any issue. Leaving negative responses and low ratings doesn't get things solved.
So please don't be upset and we will not let you down.
FAQ
How much does delivery cost and how long will it take?
You can check the delivery cost in the listing “Shipping and payments” section by selecting your country and entering your zip code. If it is not specified, please provide us your shipping address and zip code via message.
What payment methods do you accept?
We currently only accept payment via PayPal.
When will my order be dispatched?
We will arrange the shipment in 1 business day after the payment is cleared. The tracking number will be updated on in 24 hours after the shipment. Please notice that there is no shipment during weekend and holidays.
What do I do if I have not received my order?
Please simply contact us via messages, and then, we will get back to you as soon as possible with the update. Usually, we will follow up every shipment till customers get their order.
What do I do if my product is faulty?
Please simply contact us via messages, and then, we will get back to you as soon as possible. It will speed up the process if you could provide us some pictures or video to illustrate the issue details.
Visit my Store to see new items.
CNCMetalworking SuppliesHand ToolsIndustrial Control ModuleDecorate DC10K Genset Controller Generator Controller Engine Manual Start Controller New
Feature:
Type: Genset Controller
Speed input: Freq 300Hz~10kHz
Hole size: 67 × 67mm/2.6 × 2.6"
Power consumption: MAX. 2W
Model: DC10K
Power supply input: 8-33VDC
Power generation input: 15-300VAC, 50/60Hz
Dimensions: 78 × 78 × 72mm/3.1 × 3.1 × 2.8"
Oil valve output: MAX. 16A
Motor output: MAX. 10A
Excitation output: MAX. 80mA
Alarm output: MAX. 16A
Working temperature: -30 to 75℃/-86℉ to 167℉
Storage temperature: -40 to 85℃/-104℉ to 185℉
Product weight: 280g/0.6LB
Please check pictures for more details.
Description:
Controller DC10K is designed as one of the engine manual start controller.
The Hz, Volt, Battery voltage and accumulation time can be displayed through the front face LED screen. This controller is also with various kinds of stop and alarm indications to monitor the genset status. Besides, it can also connect with PC so that parameters can be set through Computer to equip for more different gensets.
Operation:
1. Power On: Switch “0” to “I” till the tube is lighted, In the procession of cranking, over speed indicator will be lighted if the crank is not successful after 45sec. (controller will cut off fuel solenoid’s output and come into protection)
2. Start Running: Switch “I” to “II” till engine started. Once power on the engine, it will be cranked. the controller will come into running status after 8 sec if cranking successfully. Then the controller will monitor the relative parameters and set protection. (the controller will cut off fuel solenoid output and display the alarm status if the genset is stopped.) Please Switch from “I” to “0”.
3. Stop and Reset: Switch from “I” to “0” and take off the power.
Comparison of DC10G & DC10K:
Similar functions, but with different wiring.
Please connect the module to PC by communication cables and powered on.
1. Alarm Setting:
* Over speed alarm: 1710RPM (Rated 50Hz), 2040RPM (Rated 60Hz), range: 0-4000RPM, when the RPM is over this value and keep more than 1sec, then the controller will alarm and stop.
* Over frequency alarm: 57Hz (Rated 50Hz), 68Hz (Rated 60Hz), range: 40-80Hz, when the frequency is over this value and keep more than 1 sec, then the controller will alarm and stop.
* Low frequency alarm: 20Hz, range: 20-60Hz, when the frequency is lower than the value and keep more than 5sec, the controller will alarm and stop.
* Over voltage alarm: 265V, range: 50-500v, 500V is set as forofferden. When the voltage is over this value and keep more than 5sec, then the controller will alarm and stop.
* Charging failure D- value: 6V, range: 1-24V, when the different value between charging D+ and Battery B+ is over this value and keep more than 5sec, then the controller will alarm.
2. Display Setting:
* Four Screen self-cycling display: the parameters shall be switched timely according to the interval time setting after choosing this option.
* Homepage option: one parameter can be displayed as homepage display after choosing this function. The page will be switched automatically after pressing page change button for a while.
* Revert-back delay: the time to revert back to homepage.
* Self-cycling display time: the interval time setting.
Package Content:
1 × DC10K Genset Controller Generator Controller Engine Manual
Notes:
Due To The Different Display And Different Light, The Picture May Not -Reflect The Actual Color Of The Item.Thanks For Your Understanding.
If you are uncertain about the item,please feel free to contact us for confirm.
PaymentShippingReturnsContact UsFAQ
We accept Paypal ,Google pay, Visa,Master Card, American Express, Discover. Mastercard etc.
We process and dispatch your purchase within 1 business day after payment clearance.
For weekend orders, we will deliver the goods on Monday
All return, exchange or refund requests **must be submitted via platform message only**.
Any direct return of purchased items will not be processed.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Before leaving us neutral or negative response, please submit your inquiry via platform message.
We will do everything we can to give you a satisfying solution.
Please don't open case via or paypal.
We do our best to resolve any issue. Leaving negative responses and low ratings doesn't get things solved.
So please don't be upset and we will not let you down.
How much does delivery cost and how long will it take?
You can check the delivery cost in the listing “Shipping and payments” section by selecting your country and entering your zip code. If it is not specified, please provide us your shipping address and zip code via message.
What payment methods do you accept?
We currently only accept payment via PayPal.
When will my order be dispatched?
We will arrange the shipment in 1 business day after the payment is cleared. The tracking number will be updated on in 24 hours after the shipment. Please notice that there is no shipment during weekend and holidays.
What do I do if I have not received my order?
Please simply contact us via messages, and then, we will get back to you as soon as possible with the update. Usually, we will follow up every shipment till customers get their order.
What do I do if my product is faulty?
Please simply contact us via messages, and then, we will get back to you as soon as possible. It will speed up the process if you could provide us some pictures or video to illustrate the issue details.
All rights reserved.
On Sep 29, 2026 at 02:07:03 PDT, seller added the following information:
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.