DC10K Diesel Generator Manual Start Controller Module Genset Controller

Description:Controller DC10K is designed as one of the engine manual start controller.The Hz, Volt, Battery voltage and accumulation time can be displayed through the front face LED screen. This controller is also with various kinds of stop and alarm indications to monitor the genset status. Besides, it can also connect with PC so that parameters can be set through Computer to equip for more different gensets.Operation:1. Power On: Switch “0” to “I” till the tube is lighted, In the procession of cranking, over speed indicator will be lighted if the crank is not successful after 45sec. (controller will cut off fuel solenoid’s output and come into protection)2. Start Running: Switch “I” to “II” till engine ...

DC10K Diesel Generator Manual Start Controller Module Genset Controller

Description:
Controller DC10K is designed as one of the engine manual start controller.
The Hz, Volt, Battery voltage and accumulation time can be displayed through the front face LED screen. This controller is also with various kinds of stop and alarm indications to monitor the genset status. Besides, it can also connect with PC so that parameters can be set through Computer to equip for more different gensets.
Operation:
1. Power On: Switch “0” to “I” till the tube is lighted, In the procession of cranking, over speed indicator will be lighted if the crank is not successful after 45sec. (controller will cut off fuel solenoid’s output and come into protection)
2. Start Running: Switch “I” to “II” till engine started. Once power on the engine, it will be cranked. the controller will come into running status after 8 sec if cranking successfully. Then the controller will monitor the relative parameters and set protection. (the controller will cut off fuel solenoid output and display the alarm status if the genset is stopped.) Please Switch from “I” to “0”.
3. Stop and Reset: Switch from “I” to “0” and take off the power.
Comparison of DC10G & DC10K:
Similar functions, but with different connect the module to PC by communication cables and powered on.
1. Alarm Setting:
* Over speed alarm: 1710RPM (Rated 50Hz), 2040RPM (Rated 60Hz), range: 0-4000RPM, when the RPM is over this value and keep more than 1sec, then the controller will alarm and stop.
* Over frequency alarm: 57Hz (Rated 50Hz), 68Hz (Rated 60Hz), range: 40-80Hz, when the frequency is over this value and keep more than 1 sec, then the controller will alarm and stop.
* Low frequency alarm: 20Hz, range: 20-60Hz, when the frequency is lower than the value and keep more than 5sec, the controller will alarm and stop.
* Over voltage alarm: 265V, range: 50-500v, 500V is set as forofferden. When the voltage is over this value and keep more than 5sec, then the controller will alarm and stop.
* Charging failure D- value: 6V, range: 1-24V, when the different value between charging D+ and Battery B+ is over this value and keep more than 5sec, then the controller will alarm.

2. Display Setting:
* Four Screen self-cycling display: the parameters shall be switched timely according to the interval time setting after choosing this option.
* Homepage option: one parameter can be displayed as homepage display after choosing this function. The page will be switched automatically after pressing page change button for a while.
* Revert-back delay: the time to revert back to homepage.
* Self-cycling display time: the interval time setting.
High performance,reliable quality.
We work with every effort to provide quality products and professional service.

Specification:
Type: Genset Controller
Speed input: Freq 300Hz～10kHz
Hole size: 67 × 67mm/2.6 × 2.6"
Power consumption: MAX. 2W
Model: DC10K
Power supply input: 8-33VDC
Power generation input: 15-300VAC, 50/60Hz
Dimensions: 78 × 78 × 72mm/3.1 × 3.1 × 2.8"
Oil valve output: MAX. 16A
Motor output: MAX. 10A
Excitation output: MAX. 80mA
Alarm output: MAX. 16A
Working temperature: -30 to 75℃/-86℉ to 167℉
Storage temperature: -40 to 85℃/-104℉ to 185℉
Product weight: 280g/0.6LB

About Delivery:
We have warehouses in California and New Jersey.
We will follow the principle of nearest delivery.
When one warehouse is out of stock, it will be shipped from another warehouse.
Thank you for your understanding.

Package Product List:

1 × DC10K Genset Controller Generator Controller Engine
Item SpecificsCountry of Origin United StatesBrand marddpairMPN AMZ1892946Speed input Freq 300Hz～10kHzType Genset ControllerWarranty 1YearPower consumption MAX. 2WModel DC10KCustom Bundle NoBundle Description NoModified Item NoPower supply input 8-33VDCColor BlackDimensions 78 × 78 × 72mm/3.1 × 3.1 × 2.8"Hole size 67 × 67mm/2.6 × 2.6"Power generation input 15-300VAC, 50/60HzOil valve output MAX. 16AMotor output MAX. 10AExcitation output MAX. 80mAAlarm output MAX. 16AWorking temperature -30 to 75℃/-86℉ to 167℉Storage temperature -40 to 85℃/-104℉ to 185℉Product weight 280g/0.6LB
About us

*. it is preferable that you email us. We will try to answer most emails within 3 days.E043

Shipping

*. We will delivery the package within 3 business day after your payment is cleared by PayPal.

*. We Ship from USA stock! Fast shipping!

Payment

*. We accept Paypal ,Google pay, Visa,Master Card, American Express, Discover. Mastercard etc.

*. After sale closing，pay as soon as possible.

Contact Us

• *. We are open Monday to Friday 8am to 5:30pm Pacific Standard Time, and Saturday 8am to12noon . Our friendly staff are available during these hours. Please feel free send us a message via .

Terms of sales

*. All the items are double checked before shipment, if the item is defect when you recieve it, please contact us for help, we will respond you within 24 hours and resolve your issue asap.

*. If you are not satisfied with the transaction, please contact us . we'll do our best to solve your problems.

*. If you are satisfied with your purchase and services, please give us a positive assessment and comprehensive assessment, the four to five stars.

Hand ToolsEdge finderCollet ChuckTool Post DC10K Diesel Generator Manual Start Controller Module Genset Controller

Description:
Controller DC10K is designed as one of the engine manual start controller.
The Hz, Volt, Battery voltage and accumulation time can be displayed through the front face LED screen. This controller is also with various kinds of stop and alarm indications to monitor the genset status. Besides, it can also connect with PC so that parameters can be set through Computer to equip for more different gensets.
Operation:
1. Power On: Switch “0” to “I” till the tube is lighted, In the procession of cranking, over speed indicator will be lighted if the crank is not successful after 45sec. (controller will cut off fuel solenoid’s output and come into protection)
2. Start Running: Switch “I” to “II” till engine started. Once power on the engine, it will be cranked. the controller will come into running status after 8 sec if cranking successfully. Then the controller will monitor the relative parameters and set protection. (the controller will cut off fuel solenoid output and display the alarm status if the genset is stopped.) Please Switch from “I” to “0”.
3. Stop and Reset: Switch from “I” to “0” and take off the power.
Comparison of DC10G & DC10K:
Similar functions, but with different connect the module to PC by communication cables and powered on.
1. Alarm Setting:
* Over speed alarm: 1710RPM (Rated 50Hz), 2040RPM (Rated 60Hz), range: 0-4000RPM, when the RPM is over this value and keep more than 1sec, then the controller will alarm and stop.
* Over frequency alarm: 57Hz (Rated 50Hz), 68Hz (Rated 60Hz), range: 40-80Hz, when the frequency is over this value and keep more than 1 sec, then the controller will alarm and stop.
* Low frequency alarm: 20Hz, range: 20-60Hz, when the frequency is lower than the value and keep more than 5sec, the controller will alarm and stop.
* Over voltage alarm: 265V, range: 50-500v, 500V is set as forofferden. When the voltage is over this value and keep more than 5sec, then the controller will alarm and stop.
* Charging failure D- value: 6V, range: 1-24V, when the different value between charging D+ and Battery B+ is over this value and keep more than 5sec, then the controller will alarm.

2. Display Setting:
* Four Screen self-cycling display: the parameters shall be switched timely according to the interval time setting after choosing this option.
* Homepage option: one parameter can be displayed as homepage display after choosing this function. The page will be switched automatically after pressing page change button for a while.
* Revert-back delay: the time to revert back to homepage.
* Self-cycling display time: the interval time setting.
High performance,reliable quality.
We work with every effort to provide quality products and professional service.

Specification:
Type: Genset Controller
Speed input: Freq 300Hz～10kHz
Hole size: 67 × 67mm/2.6 × 2.6"
Power consumption: MAX. 2W
Model: DC10K
Power supply input: 8-33VDC
Power generation input: 15-300VAC, 50/60Hz
Dimensions: 78 × 78 × 72mm/3.1 × 3.1 × 2.8"
Oil valve output: MAX. 16A
Motor output: MAX. 10A
Excitation output: MAX. 80mA
Alarm output: MAX. 16A
Working temperature: -30 to 75℃/-86℉ to 167℉
Storage temperature: -40 to 85℃/-104℉ to 185℉
Product weight: 280g/0.6LB

About Delivery:
We have warehouses in California and New Jersey.
We will follow the principle of nearest delivery.
When one warehouse is out of stock, it will be shipped from another warehouse.
Thank you for your understanding.

Package Product List:

1 × DC10K Genset Controller Generator Controller Engine

About usShippingPaymentContact UsTerms of sales

*. it is preferable that you email us. We will try to answer most emails within 3 days.E043

*. We will delivery the package within 3 business day after your payment is cleared by PayPal.

*. We Ship from USA stock! Fast shipping!

*. We accept Paypal ,Google pay, Visa,Master Card, American Express, Discover. Mastercard etc.

*. After sale closing，pay as soon as possible.

• *. We are open Monday to Friday 8am to 5:30pm Pacific Standard Time, and Saturday 8am to12noon . Our friendly staff are available during these hours. Please feel free send us a message via .

*. All the items are double checked before shipment, if the item is defect when you recieve it, please contact us for help, we will respond you within 24 hours and resolve your issue asap.

*. If you are not satisfied with the transaction, please contact us . we'll do our best to solve your problems.

*. If you are satisfied with your purchase and services, please give us a positive assessment and comprehensive assessment, the four to five stars.

All rights reserved.

On Sep 11, 2026 at 23:38:14 PDT, seller added the following information: