Auto Command Design Tech 20021 & 20721 1-Button Remote Transmitter Keyfob
$29.95

Auto Command Design Tech1-Button Remote Transmitter Keyfob With BatteryFor Models: 20021 & 20721FCC ID: ELGTRAN
Code LearningYour transmitter is factory coded to one of over 16,000,000 differentcodes. The Remote Starter module can learn the codes of up to 4different transmitters. If you want to add additional transmitters tothe receiver or if it does not respond to your transmitter - follow thesteps below to teach the receiver the transmitter code(s):
A. Turn the Control Switch onB. Push the red button to the right of the red LED, The red LEDand the dash lights come on for a second, (The Remote Starterpowers the ignition and accessory wires)C. Hold down the Start button on the transmitter until the red LEDand the dash lights come on again for a second, The modulehas now learned the transmitter code. Release hold on thetransmitter button.D. To learn additional transmitters (up to 3 more), immediately(within 5 seconds) push the Start button on another transmitterfor a few seconds until the red LED and the dash lights comeon for a second again.E. Wait 10 seconds after the last time the transmitter was pushedto exit the code-learning stage. (The LED, ignition and accessories flash on 4 times)
Note : Teaching the module a new transmitter code will erase all previous codes - so all transmitters must be taught. You have only seconds between transmitters to begin teaching a new transmitter.
Overall the fob is good used shape.Please look at the pictures to determine the conditionfor your self.It lights up but might need a new battery.
Thanks for looking.If you have any questions, please email me before purchasing.(141)

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.