220V Foldable Arm Curved Edge Banding Machine 3.8KW Rocker Arm Edge Sealing Machine Circular board≤1.6m,Square board≤1x1.5m, L-shaped board≤1.2x1.2m
The rocker arm curved edge banding machine is a special device for edge banding of boards in different shapes, the functions of edge banding, timing strip breakage, powerful suction, auxiliary hot air and so on can be fulfilled on one machine, the operating difficulty and complexity are greatly reduced, and the edge sealing performance, the attractiveness and the durability of boards can be well improved. The machine can be widely applied to the industries of cabinet manufacturing, wooden door production, home customization and so on. Product Parameters Model F11-3 Voltage 220V 50Hz Single-phase electricity Total power 3.8Kw Air pressure 0.6-0.8Mpa Edge Strip width 14-70mm Edge Strip thickness 0.5-2mm (related to edge strip materials) Edge banding speed 0-24cm/s Edge band materials PVC, veneer, melamine, plastic, etc. Board shape Circular boards, square boards, triangular boards, L-shaped boards, etc. Board size Circular board≤1.6m,Square board≤1x1.5m, L-shaped board≤1.2x1.2m Applicable boards Plywood boards, acrylic boards, chipboards, block boards, density boards, etc.
Operation Instructions
Temperature Regulation
Firstly, adjust the temperature until the hot melt glue has slight smoke, and then reduce the temperature by 5-10 degrees every 5-10 minutes. When the machine is used for the first time or each time another hot melt glue is replaced, the temperature must be reset. When the temperature reaches the set temperature, the motor can be started.
Motor Control
When the temperature reaches the set temperature, the motor can be started. The motor may be overheated when the speed is below 30 for a long period of time. The edge banding speed can be 0-24cm/s.
Attention 1. The machine must be reliably grounded. 2. Please check the amount of the remaining hot melt glue in the glue pot before use. 3. When any abnormal situation occurs in the working process, please press the emergency stop switch immediately. 4. Non-professionals are prohibited from operating and repairing the machine. 5. When disassembling and repairing the machine, first turn off the power and then wear protective tools. 6. When inspecting the circuit, be sure to completely disconnect the power supply, otherwise there is still electricity in the circuit! 7. The machine needs to be connected with an air compressor which needs to be prepared by the customer. Product Features
Foldable Arm & Suction Disc
The suction disc has the high suction so that the board can be firmly sucked onto the suction disc and prevented from being suspended in the air or falling off. Meanwhile, along with the flexible movement of the foldable arm, the board on the suction disc can be pushed to be subjected to edge banding operation. The foldable arm can be folded and unfolded at any during the edge banding operation, time and labor are greatly reduced, and the practicability is greatly improved.
Control Panel
The multifunctional control panel is designed for the machine and can fulfill multiple functions, such as power supply, emergency stop, temperature regulation, motor speed regulation and curve timing. The user can accurately control and adjust different parameters according to board processing requirements. Digital display is clear and obvious, and the production efficiency can be obviously improved.
Oil-water Separators
The machine is equipped with two oil-water separators, one oil-water separator is used for controlling the cutter and the strip moving plate, and the other is used for controlling the suction disc. The two oil-water separators control different parts correspondingly and ensure the accurate air pressure and smooth operation. The oil-water separators should be adjusted before edge banding operation is conducted.
Auxiliary Hot Air Device
The device can be used for heating and softening the edge banding strip so that the edge banding strip and the board can firmly glued together. The outlet air angle can be adjusted freely and flexibly by loosening and tightening the nut. The edge banding strip is not prone to be separated from the board, the edge banding effect can be well improved, and the bonding firmness can be higher.
Glue Coating Part
The heightened glue coating assembly adopts a high-temperature-resistant bearing and sealing rings, achieves single-sided glue coating of the edge banding strip, thereby saving the hot melt glue and being small in glue line. The 2800ml large-capacity glue pot avoids frequent addition of the hot melt glue, thereby greatly reducing the labor intensity. The lengthened knob facilitates the glue quantity adjustment, and operation is more convenient and easier.
Dual Foot Pedals
The design of double foot pedals is adopted, one foot pedal can control the suction of the suction disc, and the other foot pedal can control strip feeding and breakage of the edge banding strip. Two hands of the user are liberated, the functions are clear and accurate, the operating complexity and difficulty are greatly reduced, and the user experience is good.
Strip Moving Plate
The novel strip moving plate can prevent the edge banding strip from moving in the reverse direction, and the edge banding strip can be fed stably and smoothly and is not prone to deviation. The strip moving plate facilitates feeding movement of the edge banding strip and well assist in edge banding operation.
Cutter Assembly
The cutter assembly can make a very quick response and ensures the cutoff perpendicular precision. The cutter is stable through the double column balance, the structure is compact, and the cutoff flatness and the cutting effect are good. The maximum strip cutting width can be 70mm, and the maximum strip cutting thickness can be 2mm.
Double Cylinders
Two cylinders are installed to fulfill different function control. One cylinder is used for controlling the cutter, and the other cylinder is used for controlling strip feeding operation. Independent control of different motions can be achieved by the cylinders, the control precision is high, and the control effect is good.
Application The rocker arm curved edge banding machine can be used for processing various boards in different shapes, can stick different edge banding strips such as PVC strips, plastic strips and melamine strips to the boards, can be widely applied to woodworking plants and workshops and has a good edge banding effect. Product Display Item Number
220V Rocker Arm/Foldable Arm Curved Edge Banding Machine#15AS406C9
You can make order with no worry.
Any concern just feel free to let us know, we\'ll reply in 24 hours in normal condition.
Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.
Shipping & Handling Details
Default Shipping Cost or Free Shipping Information:
▲Default shipping cost or free shipping service is only for the customers from Canada or the lower 48 United States by Canada Post, USPS or the UPS Ground. Customers from other areas or needs other shipping ways, please contact us.
▲Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas,there WILL be extra shipping costs, please contact us for more detailed information.
▲Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.
Handling Time:Shipping is usually made in 1-3 business days after payments cleared. Orders are processed fromMonday-Friday; Not on the weekends & public holidays.
Sales tax / Customs duties:Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.
Damage In Shipping:Email or call us First! We will work with you to get the case resolved in the fastest method.
Return / Refund
If you are not 100% happy with your purchase, please contact Us. Please don\'t directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.
Returns & Exchanges
▲All returns must be made within 14 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲Returns that are the result of our seller\'s error: Buyer will receive a full refund of the item as well as shipping charges
▲All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.
Defective & Damaged Products
▲If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it\'s much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.
Payment
eCheck Issues:Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear. Then we will arrange shipments for you.
Warranty & response
▲6 months\' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲Any warranty shipping cost to us is responsible by buyer.
▲Any shipping cost to buyer is responsible by the seller.
▲We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive response as it\'s very important for us. Thanks very much.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.