12V Water Level Controller Automatic Liquid Control Switch Module For Fish Tank

Feature:

1. Strong compatibility, can be used in conjunction with a variety of liquid level sensor
2. Strong protection, with waterproof pump idling protection and water level overflow detection output.
3. Relay dry node output, can be applied to a variety of load control
4. Control of diversification, manual or automatic mode control of water pump
5. The installation is simple and convenient, the screw can be positioned and installed, and the electric box track can also be installed.

Specification:

Features:

• Strong compatibility, can be used in conjunction with a variety of liquid level sensor
• Strong protection, with waterproof pump idling protection and water level overflow detection output.
• Relay dry node output, can be applied to a variety of load control
• Control of diversification, manual or automatic mode control of water pump
• The installation is simple and convenient, the screw can be positioned and installed, and the electric box track can also be installed. LC25A01
  Weight: 28g/1oz
  Working voltage: DC 12-15V(AC 9-12V)
  Standby current 10MA
  Working current 40MA
  Maximum load: 10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDC
  Size: water tower automatic water supply system.
  Aquarium fish tank water changer system.
  Conductive liquid automatic control.
  Automatic feeding system for poultry and livestock.
  Farm automatic water supply system.
  And other occasions that require automatic water supply and water exchange.
  Solenoid valve water pump motor automatic control.
  
  Interface description:
  HIGH : Upper limit probe
  OUT : Output probe
  LOW : Lower limit probe
  IN+ : Power terminal 1 (regardless of positive and negative)
  IN- : Power terminal 2 (regardless of positive and negative)
  NC: Relay normally closed contact
  COM: Relay common contact
  NO: Relay normally open contact
  
  Package List:
  1 x Level Controller Module
  
  Note:
  1. Package does not contain probe (wire).No need to use a dedicated probe, the probe can be made using household wires
  2. For safety, use an AC/DC power supply with good isolation.