DC 12-15V(AC 9-12V) Water Level Controller Module Water Level Detection Senso...

Specification:
Model: LC25A01
Weight: 28g/1oz
Working voltage: DC 12-15V(AC 9-12V)
Standby current 10MA
Working current 40MA
Maximum load: 10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDC
Size: 54×27×19mm/2.1×1.1×0.7inch
Application:
Home water tower automatic water supply system.
Aquarium fish water changer system.
Conductive liquid automatic control.
Automatic system for poultry and livestock.
Farm automatic water supply system.
And other that require automatic water supply and water exchange.
Solenoid valve motor automatic control.
Interface description:
HIGH : Upper limit probe
OUT : Output probe
LOW : Lower limit probe
IN+ : Power terminal 1 (regardless of positive and negative)
IN- : Power terminal 2 (regardless of positive and negative)
NC: Relay normally closed
COM: Relay common
NO: Relay normally open
Package List:1× Level Controller Module
Note:
1. Package does not contain probe (wire).No need to use a dedicated probe, the probe can be made using household wires
2. For safety, use an AC/DC power supply with good isolation.Water Level Controller Module: Working voltage: DC 12-15V(AC 9-12V); Standby current 10MA; Working current 40MA; Maximum load: 10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDC.
The water level controller module is of strong , with pump idling and water level overflow detection output.
The water level controller module supports manual or automatic mode control of , with relay dry node output, can be applied to a variety of load control.
The water level controller module is of strong compatibility, and can be used in conjunction with a variety of liquid level sensor.
The installation is simple and convenient. The screw can be positioned and installed, and the electric box track can also be installed.