xTool P3 5W Infrared Module Laser Head (New In Box)

Add Metal Engraving to Your xTool P3 with the Official 5W IR Laser Module

Your xTool P3 already cuts and engraves wood, acrylic, and leather. This official 5W infrared (IR) module adds permanent marking on metal and many other materials. It plugs into your P3, so you don\'t need a second machine or an extra power supply.

Why You\'ll Want It

• Engraves metal: It marks stainless steel, brass, gold, and anodized metals. That makes it a good fit for jewelry, dog tags, tumblers, tools, knives, business cards, and custom branding.
• Very fine detail: The 0.03 mm spot size gives crisp text, logos, and intricate designs.
• Fast: It engraves at up to 1,000 mm/s and scores at up to 300 mm/s.
• Large work area: You get the full 650 × 426 mm (about 25.6\" × 16.8\") processing area, with material up to 180 mm tall.
• No extra power supply: The P3 powers the module.
• Hot-swappable: You can swap between the module and your pre-installed laser. You can also use both in the same project.
• Long lifespan: xTool rates it at about 8,000 hours.
• Works with xTool software: It is designed to work with xTool\'s software and its recommended material settings.

Materials It Can Mark

• Stainless steel
• Brass
• Gold
• Anodized metal
• Leather
• Fabric
• Rubber
• Stone
• Cement
• Many plastics and coated materials

Specifications

• Compatibility: xTool P3 only
• Laser type: Semiconductor infrared (1064 nm), pulsed at 25–30 kHz
• Spot size: 0.03 mm
• Working area: 650 × 426 mm
• Max material height: 180 mm
• Max engraving speed: 1,000 mm/s
• Max scoring speed: 300 mm/s
• Module dimensions: 136.5 × 94.5 × 92.5 mm (5.4\" × 3.7\" × 3.6\")
• Module weight: 850 g (about 1.9 lb)
• Power: Supplied by the xTool P3

Important Compatibility Notes

• This module works with the xTool P3 only. It will not work with the P2, S1, D1, F1, or other xTool machines.
• It does not cut metal. It engraves and scores.
• Avoid mirror-finish or highly reflective metals. Reflection can damage the module.
• It does not support the conveyor feeder, curved-material mode, or auto mode on the rotary attachment.
• Update your xTool software and P3 firmware to the latest versions so the module is recognized.

Condition

New in box