microSD Card Only - Weather Display for WeatherFlow Tempes

One of the biggest complaints about the WeatherFlow Tempest is that there is no dedicated display. This software solves this problem by providing a convenient, well-organized summary of all weather data from the Tempest weather station.
If you have your own Raspberry Pi, monitor (or touchscreen), and keyboard and mouse, you can quickly build your own WeatherFlow Tempest weather display. But for many users, creating the microSD card and installing the WeatherFlow Pi Console software is a stumbling block. Others already have the components and just want the pre-made microSD card to get started quickly.
Whatever the reason, I have had many requests from buyers who just want to purchase the microSD card.
Here\'s what you need to get started:

• You MUST have a WeatherFlow Tempest (or Air/Sky)
• You MUST have a WeatherFlow personal use token
• Minimum Raspberry Pi 3B+ with at least 1 GB RAM
• Touchscreen that connects via DSI or HDMI and USB
• Or a monitor or TV with HDMI input
• USB keyboard and mouse for initial setup
• Recommended power supply with output of 5v 3A when connecting a touchscreen

The WeatherFlow Pi Console displays the following information provided by your Tempest:

• Outdoor temperature with dew point, humidity, and feels like temperature
  
• Indoor temperature if you have the WeatherFlow Air
• Outdoor and indoor (only with the Air module) daily min and max values along with the time of occurrence
• Outdoor temperature 24-hour difference and hourly temperature trend
  
• Wind speed (average, lull, and gust) with direction (degrees and cardinal) provided by 3-second rapid wind updates
• Daily maximum wind gust and daily average speed
• Barometer with atmospheric pressure, pressure trend, current condition, and daily min and max values
  
• Rainfall totals for today, yesterday, month, and year
• When raining, see the precipitation rate and description (light, moderate, heavy, etc)
• Lightning time and distance since the last strike
• Lightning strike totals for the last 3 hours, today, yesterday, month, and year
• Solar radiation and UV index
• Sunrise/sunset times and number of hours until dawn and sunset
• Moonrise and moonset times, moon phase, and date of next full moon and new moon
• Your specific Hourly forecast provided by WeatherFlow
• Location-specific Sager Weathercaster forecast
• Setting screen to change time/date formats and display units
• Screen layout can be changed by editing the configuration file
• New: 1, 4, or 6-panel screen layout
• New: Internet connection optional (LAN connection still required -- either wired or wireless)
  

Weather data is updated every one minute with rapid wind updates as soon as every 3 seconds. The WeatherFlow Air is optional for indoor temperatures. All data is displayed on your monitor or TV for convenient viewing. Note, the display will not be touch sensitive unless you use a touch screen monitor.
This weather display console is based on the Raspberry Pi, Raspberry OS, and the open-source WeatherFlow Pi Console software (created by Peter Davis). The software was recently updated to version 26.4.2.
For the initial setup, you will need to connect a keyboard and mouse to the device via the USB port. Once setup is complete, the mouse and keyboard are no longer required during normal operation as long as you have a touchscreen. You may wish to use a mouse when connecting to non-touch monitor.
You will receive One (1) microSD card with the Raspberry Pi OS and the WeatherFlow Pi Console software pre-installed.
NOTE: If you touchscreen requires any specific software to be installed to enable it, you will need to install that software when you receive the microSD card.
After purchase, I can set up the display console software for you if you would like. You will need to send me some information about your Tempest. Once you receive the microSD card, use a keyboard and mouse to connect to your home Wi-Fi. You can also connect the display to a wired network if you wish. I am able to preset your WiFi settings if you want so the device will work immediately out of the box.Please ask any questions you may have.