Model
AP-21A
Type
LED-type digital pressure sensor (negative-pressure model)
Rated pressure
0 to -760 mmHg, 0 to -99 kPa, 0 to -14.5 PSI, 0 to -1.00 bar
Fluid type
Air or non-corrosive gases
Type of pressure
Gage pressure
Display
3-digit 7-segment LED (character height: 8 mm0.315\")*1, display cycle: 5 times/sec.
Repeatability
±1 % of F.S. or less
Response
5 ms
Display resolution
5 mmHg/1 kPa/0.1 psi/0.01 bar
Temperature characteristics
±3 % of F.S. or less of the detected pressure at 25 °C77 °Fwithin the temperature range of 0 to +50 °C32 to 122 °F.
I/O
Control output
Maximum NPN open-collector output: 100 mA (40 V or less), residual voltage: 1 V or less, 2 outputs
Rating
Power voltage
12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Current consumption
45 mA or less
Environmental resistance
Pressure resistance
5 kgf/cm2*1
Ambient temperature
0 to +50 °C32 to 122 °F
Relative humidity
35 to 85 % RH (No condensation)
Vibration resistance
10 to 55 Hz, Double amplitude 1.5 mm0.06\", 2 hours in each of the X, Y, and Z directions
Shock resistance
100 m/s2(Approx. 10 G), 3 times in each of the X, Y, and Z directions
Material
Front case: polycarbonate, pressure port: die-cast zinc
Weight
Main unit: Approx. 65 g (excluding the cable; Approx. 105 g including the 2 m cable)
*1When the AP-21A is in the \"Std,\" \"psi,\" or \"bar\" unit mode, negative pressure is not displayed with a minus sign.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.