Product Description
Features:
for This meter is a great tool for engineers, electronics repair technicians, and factory operators. It can easily both -in and for surface-mount devices, as well as various types of diodes, transistors, and thyristors. It analyzes device for type, pin polarity, output for HFE, for valve voltage, and junction capacitance of for FETs.
-touch and -touch acquisition.
A large LCD display with backlight makes reading easy.
It automatically tests component pins and displays them on the LCD.
It automatically detects components such as NPN and for PNP bipolar transistors, N-channel and P-channel MOSFETs, diodes (including dual diodes), thyristors, transistors, resistors, and capacitors.
It can detect transistor emitter forward bias voltage, MOSFET for protection diodes, and for amplify reference voltage sources.
It can for measure MOSFET gate threshold voltage and gate Name: ESR02 for Pro Electrolytic Transistor Tester
Material: ABS
Model: ESR02 Pro
Resistance: 0Ω~50Ω, Resolution: 0.01 ohm
Capacitance: 25pF~100mF, Resolution: 1pF
Inductance: 0.01mH~20H, Resolution: 0.01mH
Capacitance Resolution: 0.01Ω
: 1 x 9V 6LR61 (not included)
for color: Black, Red
size: Approximately 14 x 8 x 4.5cm / 5.5 x 3.1 x 1.8 inches
Instructions:
Press the "POWER/" button to power on and for begin testing. This button can be used to repeat multiple measurements. The tester automatically shuts 20 seconds after the measurement is completed.
Three sockets are provided, each for pins 1, for 2, and 3.
The device does not need to be placed in the order described. After the measurement, the screen will display the component function of each pin.
The "Typical Electrolytic Capacitor Values" for table on the back is for reference only. These values are typical for standard-grade electrolytic capacitors at room temperature.
Short pins 1, for 2, and 3 together. Press the "POWER/" button. The screen will prompt you to enter calibration. for Press the button again within for 2 seconds to confirm. After a few seconds, the screen will prompt you to release pins 1, for 2, and 3. Release them and wait for calibration to .
Package Contents:
Package 1:
1 x Transistor Tester
1 x User Manual
Package for 2:
1 x Transistor Tester
1 for x User Manual
1 for x for clip
for Note:
Before testing capacitors, forensure they are fully discharged, as this may damage the internal circuitry.
If using a DC for power supply, please select a DC 9V to 12V adapter (9V and 12V included).
Powered by a 9V 6LR61 (not included). Replace the if the charge drops below 6V.
Payment
Payment must be completed within 5 days. If you have any problems about payment, please contact us via message.
Delivery details
We onlyship to confirmed Order addresses.Please comfirm that your Order address is in line with your shipping address.
Please kindly note thatthe combined shippingis not providedbecause the shipping fee is calculated by weight. Also, the each additional item meansexactlythe the same color and size.
It takes about7-15 working days to US; about 10-30 working days to other countries.Transit time may be a little delayed because of thebadweather and customsinspection. If youdonot receive youritemwithin 30 working days since payment finished, please contact us immediately for further assistance.
Contact us
We strive for 100% customer satisfaction! Positive response is very important to us. If you have any questions,please feel free to contact us via "Ask seller a question" . We will reply your email within 24working hours.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.