|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Xantech XT-4K-VIP-TX 4K Video Over IP Transmitter with Audio Breakout
$228.00

Xantech XT-4K-VIP-TX 4K Video Over IP Transmitter with Audio Breakout XT-4K-VIP-TX 4K Video Over IP Receiver with Audio Breakout and Independent Signal Routing over 1Gb Network The Xantech Premium Video over IP (VIP) platform enables distribution of HDMI video over a 1Gb Network switch. The XT-4K-VIP-TX and XT-4K-VIP-RX are HDCP 2.2 compliant Transmitters and Receivers that use visually lossless compression technology to deliver HDMI, Bi-directional IR, RS-232 and USB/KVM up to lengths of 100m over standard network architecture. The XT-4K-VIP-TX/RX can be powered via PoE from a Network switch or powered locally should a switch either not be used or not support PoE. With multiple configuration options available, this Video over IP solution is ideal for both commercial and residential installations. Features: - Advanced UHD video over 1Gb Network
- Virtually unlimited system size
- Connect to any supported Layer 2 / Layer 3 Managed Switch for HDMI video distribution
- Supports up to 4K HDR UHD video (3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 24Hz 4:4:4, and 4K @ 60Hz4:2:0)
- Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmission
- Video up-scaling and down-scaling
- Features 4 operational modes:
Matrix distribution (Requires 1Gb network switch) Video wall (Requires 1Gb network switch) One-to-one HDMI extender (No network switch required) One-to-many HDMI splitter (No network switch required) - HDCP 2.2 Compliant
- Advanced EDID management
- Analog L/R audio embedding and de-embedding on XT-4K-VIP-TX Transmitter
- Analog L/R audio breakout on XT-4K-VIP-RX Receiver
- Bi-directional RS-232 and IR pass through
- USB 2.0 connectivity (backwards compatible with USB 1.1) for KVM and other USB devices
- PoE (Power over Ethernet) to power Xantech products from PoE switch
- Local 24V 1A power input should network switch not support PoE, sold separately
- Simple configuration via web-GUI through the XT-4K-VIP-ACM
- HDMI audio embedding supports up to 192 Khz, XT-4K-VIP-RX analog audio output supports up to 96Khz only
- RS-232, IR and Telnet/IP integration for control of the VoIP system using Xantech XT-4K-VIP-ACM
Specifications: - Shipping Info
- Length: 10 (Inches)
- Width: 6.4 (Inches)
- Height: 2.1 (Inches)
- Weight: 1.75 (Lbs)
Other Specifications - Video output: 1 x HDMI Type A, female
- Audio input: 1 x 3.5mm L/R analog audio
- Audio output: 2 x RCA L/R analog audio
- Video input/Ethernet port: 1 x LAN RJ45 connector
- Video/Ethernet extension: 1 x LAN RJ45 connector (PoE 9W)
- USB / KVM: 2 x USB, Type A
- RS-232 serial port: 1 x 3-pin Phoenix connector
- IR input: 1 x 3.5mm stereo jack
- IR flasher: 1 x 3.5mm mono jack
- Firmware update: 1 x USB Micro B
- Accessories: Mounting kit included
- Operating temperature: 32°F to 104°F
- Storage temperature: -4°F to 140°F

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|