Wire Tracer Cable Tracker Tone Generator Probe Kit Telephone Network Line Tester

$11.99

Wire Tracer Tone Generator and Probe Kit - Network Cable Phone Line Tester - Wire Cable Tracker Telephone Line Finder Toner Signal Detector Locator Tool

【Quick & Accurate Network Cable Collation】This cable tracer can identify and trace wire or cable within a group without stripping the insulation. Please note: It is used for telephone line testing and cannot be used for continuity testing, and it is NOT suitable for underground wire, in-wall wire, buried wire, automotive cable, etc. Do not use it on live circuit. Batteries are not Included.
【Flexible Tone Generator Wire Tracer】This wire toner tracer can send a single pure tone or dual alternating tones to the target cable or wire. The wire toner receiver is equipped with a volume adjustment dial, you can adjust the sound level according to your working environment. Please note: It may NOT be suitable for noisy work environment. It does not have an earphone function and the sound received is a bit small.
【Line Status Tester】This phone line tester can be used to judge the TIP and RING line and identify the state of the working telephone line (clear, ring, busy).
【Tone Tracing Probe Kit】This signal generator kit can trace the cable with RJ11 or trace metal wire through alligator clips. You can use the test lead set to quickly find the required cables in the cable bundle. Suitable for wires, fixed telephones, coaxial cables, etc.
【No Risk】Our wire tester has One-year Warranty! And, we always put our customers first place and aim to provide good service! If you are unsatisfied with our wire finder for any reason, please feel free to contact us, and then we will try our best to solve your problem.
- Designed to identify trace wires or cables within a group without damaging the insulation.
- Works with any Tone Generator to identify wires.
- Volume control for increased sensitivity & adjustable to suit work environment.
- Recessed ON/OFF button prevents battery drain.
- Power supply is in any 9V battery.
- Red & black test leads are provided & has a standard 4 conductor modular cord & plug.
- A 3 position switch controls the mode of operation.
- Tone selector switch.
Package List
- 1 x Cable tracker sender emitter with two alligator clips and RJ-11 plug
- 1 x Cable tracker receiver
- 1 x user manual
- 1 x tool bag
Please Note:Two 9V batteries are not included in the package because the international air does not allow.
Wire Tracer Probe
The probe can pick up a tone without touching the wire. It can identify the selected wire or cable audibly.
LED Indication
In TONE Mode, connect the red clip to the wire and the black clip to the ground, and then trace the wire to the disconnected position.
In CONT Mode, connect two clips to each end of the circuit cable to judge the TIP and RING line.
Alligator Clips
Two alligator clips are used to connect the metal wire. Before testing the line, the power supply must be cut off to avoid the risk of electric shock.
RJ-11 Plug
The RJ-11 plug are used to identify the status on the telephone line that works (Clear, ring, busy)

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Wire Tracer Cable Tracker Tone Generator Probe Kit Telephone Network Line Tester

More items on eBay