|
>> If you dont know how to design a userbar, then write here a Userbar that you want.
>> If you know how to design them help these people and design what they request.
|
 |
 |
USERBARS.org | Free Forum Userbars
| On eBay now |
Winding Machine Tensioner, Magnetic Damper,Torque Controller
$20.45

Selection table of magnetic damper Suitable for enameled wire,Wire,Winding operation of textile thread. Magnetic damper, also known as torque controller, is an automatic control element with superior performance,With its unique characteristics to the tension and torque control industry, especially the paper industry,Wire drawing and cable winding,Metal foil,Strip,Film processing equipment and textile machinery and other advanced control methods. Torque adjustment Turn the scale needle to the preset torque value,Locking set screw. install Don\'t use unnecessary force and avoid impact Through two sides3Screw hole fastening installation,Make sure that the screw will not loosen due to vibration operation The discs and magnets inside are fragile parts,Don\'t throw it on the ground or vibrate The structure of this product needs to maintain a stable narrow distance,If an unnecessary external force is applied,Abnormal operation may occur be careful The disc receives a very strong magnetic force,So when the torque setting changes from a very high torque to a very low torque,The residual magnetic force of the disc will cause uneven rotation.In order to avoid this phenomenon,When adjusting from high torque to low torque,Turn the output shaft slowly. 1)Characteristics of magnetic damper: A.Magnetic damping tension controller is also known as permanent magnetic tension controller,It is a device that uses magnetic field as medium to transfer constant torque.No contact between damping disk and magnet,No sliding friction,Therefore, it has a long service life,Tension control is extremely stable. B.The rotating parts are made of light and solid materials,Minimum moment of inertia. C.The tension output rubber wheel is made of elastic soft rubber,Don\'t hurt the line. D.All metal parts are treated with antirust,Excellent corrosion resistance. E.The installation structure is simple,The tension is easy to adjust,Compact structure design,Small size,It can work stably in various positions. 2)Adjustment methods and precautions of magnetic damper 1.Adjust the scale value to3Use above,If the tension is too high at this time,It\'s better to choose a damper of smaller size. 2.If in the scale value3Use the following,There may be pulsations of force.Please click the next item3The method can eliminate the pulsation. 3.Loosen the fastening screws,Turn the scale to10,Turn the scale slowly while turning the spindle0,Then go to the desired scale value.Tighten the locking screw. 4.If there is tension pulsation during use,Please repeat the above adjustment method3Until a satisfactory tension is obtained. 5.The damper uses a magnet to produce a medium magnetic field,The material is brittle,Please do not open and impact during use,So as not to damage the parts.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
|
|
|
 |
 |
|