Winding machine accessories Winding machine tensioner Tensioner Magnetic tensioner (vertical)
Fixed tensioner: Install the tension rod as shown in the diagram and tighten the fixing screws. When tightening, the screws must be aligned with the plane of the shaft.
2. Adjust the wool ring clamp:
Adjust the wool ring knob on the back of the tensioner to loosen the clamping force of the wool ring clamp. Turning clockwise tightens it, and turning counterclockwise loosens it. When using low tension, the tightness of the wool ring clamp should be adjusted so that the enameled wire does not fall off the wool ring, resulting in only minimal resistance.
3. Set the output tension
Adjust the tension control knob and counter-tension knob repeatedly according to the required tension to achieve the desired output tension and ensure the tension rod is at the appropriate working angle.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.